Connectivity Guide

Example
OS10# show qos system
ETS Mode : off
ECN Mode : off  shows whether the ECN is enabled globally or not
Service-policy (Input) (qos) : policy1
Service-policy (Output)(queuing) : policy2
Supported Releases 10.4.1.0 or later
show qos system buers
Displays the system buer congurations and utilization.
Syntax
show qos system {ingress | egress} buffers
Parameters None
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show qos system ingress buffer
All values are in kb
Total buffers - 12187
Total lossless buffers - 0
Maximum lossless buffers - 5512
Total shared lossless buffers - 0
Total used shared lossless buffers -
Total lossy buffers - 11567
Total shared lossy buffers - 11192
Total used shared lossy buffers - 0
The following command is supported on Z9100-ON and Z9264F-ON platforms:
OS10# show qos system ingress buffer detail
All values are in kb
Total buffers - 43008
Total lossless buffers - 0
Maximum lossless buffers - 23312
Total shared lossless buffers - 0
Total used shared lossless buffers -
Total lossy buffers - 42388
Total shared lossy buffers - 39974
Total used shared lossy buffers - 0
MMU 0
Total lossy buffers - 10597
Total shared lossy buffers - 10012
Total used shared lossy buffers - 0
MMU 1
Total lossy buffers - 10597
Total shared lossy buffers - 10012
Total used shared lossy buffers - 0
MMU 2
Total lossy buffers - 10597
Total shared lossy buffers - 9993
Total used shared lossy buffers - 0
MMU 3
Total lossy buffers - 10597
Total shared lossy buffers - 9993
Total used shared lossy buffers - 0
OS10# show qos system egress buffer
All values are in kb
1026
Quality of service