Deployment Guide

55 Dell EMC Networking Virtualization Overlay with BGP EVPN
When complete, the Configure > Settings > Topology page for Mgmt-VDS appears as shown in Figure 19.
LAGs configured on Mgmt-VDS
This configuration brings up the VLT port channels on the leaf switches.
This is confirmed by running the show vlt domain_id vlt-port-detail command on the leafs. The
example below is from Leaf1a. The status for port channels connected to configured hosts is now up as
shown in bold below.
Leaf1a# show vlt 127 vlt-port-detail
vlt-port-channel ID : 100
VLT Unit ID Port-Channel Status Configured ports Active ports
-------------------------------------------------------------------------------
1 port-channel100 up 1 1
* 2 port-channel100 up 1 1
vlt-port-channel ID : 101
VLT Unit ID Port-Channel Status Configured ports Active ports
-------------------------------------------------------------------------------
1 port-channel101 up 1 1
* 2 port-channel101 up 1 1