Install Guide
Table Of Contents
- Dell EMC PowerSwitch Z9264F-ON Installation Guide August 2021
- Contents
- About this guide
- Z9264F-ON switch
- Site preparations
- NEBS compliance
- Z9264F-ON switch installation
- Power supplies
- Fans
- Management ports
- Before you install an OS
- Specifications
- Chassis physical design
- IEEE standards
- Agency compliance
- USA Federal Communications Commission FCC statement
- European Union EMC directive conformance statement
- Japan VCCI compliance for class A equipment
- Korean certification of compliance
- China warning
- Safety standards and compliance agency certifications
- Electromagnetic compatibility
- Product recycling and disposal
- Dell EMC support
Figure 3. Z9264F-ON PSU-side view
1. Fan units
2. PSU units
Features
The Z9264F-ON switch offers the following features:
● Sixty-four QSFP28 ports that support 1, 10, 25, 40, 50, and 100 GbE
● Two SFP+ that support 1 and 10 GbE
● One MicroUSB type-B console port
● One RJ-45 serial console port
● One serial management USB type-A port for more file storage
● Denverton C3538 4-Core CPU system with 16 GB DDR4 memory and 32 GB SSD storage.
● One 10/100/1000BaseT Ethernet management port
● Two hot-swappable redundant power supplies
● Four hot-swappable fan modules
● Standard 2U switch
Physical dimensions
The Z9264F-ON switch have the following physical dimensions:
● 442 x 510 x 85.6 mm (W x D x H)
● 17.4 x 20.0 x 3.37 inches (W x D x H)
● PSU/fan tray handle: 1.38 inches (35 mm)
LED display
The Z9264F-ON switch includes LED displays on the I/O side of the switch. This section describes open networking installation
environment (ONIE) LED behaviors. Some LED behaviors may change after you install your software.
Z9264F-ON switch
7