Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch Z9264F-ON

1091

AG1(conf-if-po-12)# vlt-port-channel 12

AG1(conf-if-po-12)# exit

PIM neighbors of AG1 and the interface to reach the neighbors

The show ip pim neighbor command displays the PIM neighbors of AG1 and the interface to reach the neighbors.

AG1# show ip pim neighbor

Neighbor Address Interface Uptime/Expires Ver DR Priority / Mode

----------------------------------------------------------------------

11.0.0.2 vlan11 00:00:43/00:01:33 v2 10 / S

12.0.0.2 vlan12 00:01:01/00:01:44 v2 10 / S

12.0.0.3 vlan12 00:01:01/00:01:43 v2 1000 / DR S

13.0.0.2 vlan13 00:01:02/00:01:42 v2 1000 / DR S

IGMP and PIM states in AG1

The show ip igmp groups command output displays the IGMP database.

AG1# show ip igmp groups

Total Number of Groups: 1

IGMP Connected Group Membership

Group Address Interface Mode

Uptime Expires Last Reporter

225.1.1.1 vlan11 Exclude

00:01:55 00:01:53 0.0.0.0

The show ip pim tib command output displays the PIM tree information base (TIB).

AG1# show ip pim tib

PIM Multicast Routing Table

Flags: S - Sparse, C - Connected, L - Local, P - Pruned,

R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,

K - Ack-Pending state

Timers: Uptime/Expires

Interface state: Interface, next-Hop, State/Mode

(*, 225.1.1.1), uptime 00:02:05, expires 00:00:54, RP 103.0.0.3, flags: SCJ

Incoming interface: vlan12, RPF neighbor 12.0.0.3

Outgoing interface list:

vlan11 Forward/Sparse 00:02:05/Never

The show ip pim mcache command output displays multicast route entries.

AG1# show ip pim mcache

PIM Multicast Routing Cache Table

(*, 225.1.1.1)

Incoming interface : vlan12

Outgoing interface list :

vlan11

AG1-VLT-NODE-1# show ip pim mcache vlt