Users Guide

(172.16.1.201, 225.1.0.0), uptime 01:24:45, expires 00:02:46, flags: CTP
Incoming interface: vlan100, RPF neighbor 0.0.0.0
Outgoing interface list:
The show ip pim mcache command displays the multicast route entries.
CR1# show ip pim mcache
PIM Multicast Routing Cache Table
(192.168.1.201, 225.1.0.0)
Incoming interface : vlan1001
Outgoing interface list :
vlan1
(192.168.1.202, 225.1.0.0)
Incoming interface : vlan1001
Outgoing interface list :
vlan1
(172.16.1.201, 225.1.0.0)
Incoming interface : vlan1
Outgoing interface list :
vlan1001
The show ip pim mcache vlt command displays the multicast route entries synchronized between the VLT peers.
CR1# show ip pim mcache vlt | no-more
PIM Multicast Routing Cache Table
Flags: S - Synced
(192.168.1.201, 225.1.0.0),flags: S
Incoming interface : vlan1001
Outgoing interface list :
vlan100 (S)
(192.168.1.202, 225.1.0.0),flags: S
Incoming interface : vlan1001
Outgoing interface list :
vlan100 (S)
(172.16.1.201, 225.1.0.0)
Incoming interface : vlan1
Outgoing interface list :
vlan1001 (S)
The show ip pim bsr-router command displays information about the BSR.
CR1# show ip pim bsr-router
This system is the Bootstrap Router (v2)
BSR address: 10.1.100.5
BSR Priority: 199, Hash mask length: 31
Next bootstrap message in 00:00:12
This system is a candidate BSR
Candidate BSR address: 10.1.100.5, priority: 199, hash mask length: 31
Next Cand_RP_advertisement in 00:00:24
RP: 10.1.100.5(loopback1)
The show ip pim rp command displays information about all multicast group-to-RP mappings.
CR1# show ip pim rp
Group RP
Multicast
1117