Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch Z9264F-ON
1121112211231124112511261127112811291130
AG4
The show ip pim interface command displays the PIM-enabled interfaces on the node.
AG4# show ip pim interface
Address Interface Ver/Mode Nbr Count Query Intvl DR Prio DR
------------------------------------------------------------------------------
10.1.4.4 vlan1201 v2/S 1 30 1 10.1.4.5
10.112.1.4 vlan1301 v2/S 3 30 1 10.112.1.4
192.168.1.1 vlan2001 v2/S 3 30 1 192.168.1.4
10.192.168.4 vlan1251 v2/S 1 30 1 10.192.168.5
The show ip pim neighbor command displays the PIM neighbor of the node and the interface to reach the neighbor.
AG4# show ip pim neighbor
Neighbor Address Interface Uptime/Expires Ver DR Priority / Mode
-----------------------------------------------------------------------
10.1.4.5 vlan1201 00:22:44/00:01:35 v2 1 / DR S
10.112.1.1 vlan1301 00:22:52/00:01:43 v2 1 / S
10.112.1.2 vlan1301 00:20:35/00:01:40 v2 1 / S
10.112.1.3 vlan1301 00:23:26/00:01:42 v2 1 / S
192.168.1.4 vlan2001 00:22:52/00:01:41 v2 4294967295 / DR S
192.168.1.3 vlan2001 00:20:33/00:01:41 v2 4294967290 / S
192.168.1.2 vlan2001 00:23:50/00:01:41 v2 100000 / S
10.192.168.5 vlan1251 00:22:37/00:01:39 v2 1 / DR S
The show ip pim summary command displays the PIM summary.
AG4# show ip pim summary
Entries in PIM-TIB/MFC: 140/80
Active Modes:
PIM-SM
Interface summary:
8 active PIM interfaces
0 passive PIM interfaces
20 active PIM neighbor
TIB Summary:
20/20 (*,G) entries in PIM-TIB/MFC
60/60 (S,G) entries in PIM-TIB/MFC
60/0 (S,G,Rpt) entries in PIM-TIB/MFC
2 RP
3 sources
0 Register states
Message Summary:
389/0 Joins/Prunes sent/received
0/0 Candidate-RP advertisements sent/received
687/1944 BSR messages sent/received
0 Null Register messages received
0/0 Register-stop messages sent/received
Data path event summary:
22 last-hop switchover messages received
120/67 pim-assert messages sent/received
0/0 register messages sent/received
VLT Multicast summary:
0(*,G) synced entries in MFC
0(S,G) synced entries in MFC
0(S,G,Rpt) synced entries in MFC
The show ip pim tib command displays the PIM tree information base (TIB).
AG4# show ip pim tib
1130
Multicast