Users Guide

Supported
releases
10.4.2.0 or later
show nve vxlan-vni
Displays information about the VXLAN virtual networks on the switch.
Syntax
show nve vxlan-vni
Parameters None
Default Not configured
Command mode EXEC
Usage
information
Use this command to display information about configured VXLAN virtual networks. Each VXLAN virtual
network is identified by its virtual-network ID.
Example
OS10# show nve vxlan-vni
VNI Virtual-Network Source-IP Remote-VTEPs
------------------------------------------------------
10000 1 1.1.1.1 2.2.2.2
200 2 1.1.1.1 2.2.2.2
300 300 1.1.1.1 2.2.2.2
Supported
releases
10.4.2.0 or later
show virtual-network
Displays a virtual-network configuration, including all VXLAN configurations.
Syntax
show virtual-network [vn-id]
Parameters
vn-id
Enter a virtual-network ID, from 1 to 65535.
Default Not configured
Command mode EXEC
Usage
information
Use this command to display the VNID, port members, source interface, and remote tunnel endpoints of a
VXLAN virtual network.
Example
OS10# show virtual-network
Codes: DP - MAC-learn Dataplane, CP - MAC-learn Controlplane, UUD -
Unknown-Unicast-Drop
Un-tagged VLAN: 888
Virtual Network: 60000
VLTi-VLAN: 2500
Members:
VLAN 1000: port-channel1, ethernet1/1/9, ethernet1/1/10
VLAN 2500: port-channel1000
VxLAN Virtual Network Identifier: 16775000
Source Interface: loopback100(222.222.222.222)
Remote-VTEPs (flood-list): 55.55.55.55(DP),77.1.1.1(DP)
Supported
releases
10.4.2.0 or later
VXLAN 1155