Users Guide
Eth 1/1/9         No                BREAKOUT_1x1
Eth 1/1/10        No                BREAKOUT_1x1
Eth 1/1/11        No                BREAKOUT_1x1
Eth 1/1/12        No                BREAKOUT_1x1
Eth 1/1/13        No                BREAKOUT_1x1
Eth 1/1/14        No                BREAKOUT_1x1
Eth 1/1/15        No                BREAKOUT_1x1
Eth 1/1/16        No                BREAKOUT_1x1
Eth 1/1/17        No                BREAKOUT_1x1
Eth 1/1/18        No                BREAKOUT_1x1
Eth 1/1/19        No                BREAKOUT_1x1
Eth 1/1/20        No                BREAKOUT_1x1
Eth 1/1/21        No                BREAKOUT_1x1
Eth 1/1/22        No                BREAKOUT_1x1
Eth 1/1/23        No                BREAKOUT_1x1
Eth 1/1/24        No                BREAKOUT_1x1
Eth 1/1/25        Yes               BREAKOUT_1x1
Example (brief)
OS10# show system brief
Node Id           : 1
MAC               : 14:18:77:15:c3:e8
-- Unit --
Unit  Status      ReqType     CurType     Version
----------------------------------------------------------------
1     up          S4148F      S4148F      10.5.1.0
-- Power Supplies --
PSU-ID  Status      Type    AirFlow   Fan  Speed(rpm)  Status
----------------------------------------------------------------
1       up          AC      NORMAL    1    13312       up
2       fail
-- Fan Status --
FanTray  Status      AirFlow   Fan  Speed(rpm)  Status
----------------------------------------------------------------
1        up          NORMAL    1    13195       up
2        up          NORMAL    1    13151       up
3        up          NORMAL    1    13239       up
4        up          NORMAL    1    13239       up
Supported
Releases
10.2.0E or later
traceroute
Displays the routes that packets take to travel to an IP address.
Syntax
traceroute [vrf {management | vrf-name}] host [-46dFITnreAUDV] [-f
first_ttl] [-g gate,...] [-i device] [-m max_ttl] [-N squeries] [-p port]
[-t tos] [-l flow_label] [-w waittime] [-q nqueries] [-s src_addr] [-z
sendwait] [--fwmark=num] host [packetlen]
Parameters
● vrf management— (Optional) Traces the route to an IP address in the management VRF instance.
● vrf vrf-name — (Optional) Traces the route to an IP address in the specified VRF instance.
● host — Enter the host to trace packets from.
● -i interface — (Optional) Enter the IP address of the interface through which traceroute sends
packets. By default, the interface is selected according to the routing table.
● -m max_ttl — (Optional) Enter the maximum number of hops for the maximum time-to-live
value that traceroute probes. The default is 30.
Troubleshoot Dell EMC SmartFabric OS10 1773










