Users Guide

Activity Schedule Schedule created on
----------------------------------------------------
full-transfer None Never
Activity Status :
Activity Status last start last success
----------------------------------------------------------------------------
full-transfer Success 2019-06-13 16:08:51 2019-06-13
16:15:19
event-notification Success 2019-06-13 16:04:35 2019-06-13
16:04:39
keep-alive Success 2019-06-13 18:00:00 2019-06-13
17:30:03
Server Status :
Last KeepAlive Status : Failed
Last KeepAlive Successful at : 2019-06-13 17:30:03
Last KeepAlive Failed at : 2019-06-13 18:00:03
Last MFT Status : Success
Last MFT Successful at : 2019-06-13 16:15:19
Last MFT Failed at : Never
Supported
Releases
10.2.0E or later
source-interface
Configures the source interface to establish outgoing connectivity to the SupportAssist server.
Syntax
source-interface interface
Parameters interface:
● ethernet node/slot/port[:subport]—Enter a physical Ethernet interface.
● loopback number—Enter a Loopback interface, from 0 to 16383.
● management 1/1/1—Enter the management interface.
● port-channel channel-id—Enter a port channel interface, from 1 to 128.
● vlan vlan-id—Enter a VLAN ID, from 1 to 4093.
Default Not configured.
Command Mode SUPPORT-ASSIST
Usage
Information
The no version of this command removes the configuration.
Examples
OS10(conf-support-assist)# source-interface ethernet 1/1/4
OS10(conf-support-assist)# source-interface loopback 1
OS10(conf-support-assist)# source-interface mgmt 1/1/1
OS10(conf-support-assist)# source-interface port-channel 10
OS10(conf-support-assist)# source-interface vlan 100
Supported
Releases
10.4.0E(R1) or later
1798 Troubleshoot Dell EMC SmartFabric OS10