Users Guide

Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show dot1x
PAE Capability: Authenticator only
Protocol Version: 2
System Auth Control: Enable
Auth Server: Radius
Supported
Releases
10.2.0E or later
show dot1x interface
Displays 802.1X configuration information.
Syntax
show dot1x interface ethernet node/slot/port[:subport]
Parameters ethernet node/slot/port[:subport]—Enter the Ethernet interface information.
Command Mode EXEC
Usage
Information
Use this command to view the dot1x interface configuration for a specific interface.
Example
OS10# show dot1x interface
802.1x information on ethernet1/1/1
-------------------------------------
Dot1x Status: Enable
802.1x information on ethernet1/1/2
-------------------------------------
Dot1x Status: Enable
802.1x information on ethernet1/1/3
-------------------------------------
Dot1x Status: Enable
802.1x information on ethernet1/1/4
-------------------------------------
Dot1x Status: Enable
802.1x information on ethernet1/1/5
-------------------------------------
Dot1x Status: Enable
802.1x information on ethernet1/1/6
-------------------------------------
Dot1x Status: Enable
802.1x information on ethernet1/1/7
-------------------------------------
Dot1x Status: Enable
Port Control: AUTO
Port Auth Status: UNAUTHORIZED
--more--
Example (when
dot1x is not
enabled globally)
OS10# show dot1x interface
802.1x not enabled in the system
OS10#
Supported
Releases
10.2.0E or later
536 Layer 2