Users Guide

Parameters vlan-id—(Optional) Enter a VLAN ID, from 1 to 4093.
Command Mode EXEC
Usage
Information
This command displays information about primary and secondary VLANs. Use this command to view the
following information:
● A list of primary VLANs and their member ports
● A list of secondary VLANs and their member ports
● The primary-VLAN-to-secondary-VLAN mapping information
Example
OS10# show vlan private-vlan
Primary Secondary Type Active Ports
------- --------- --------- ------
--------------------------------------------
100 Primary Yes Eth1/1/11
Po100-101,1000
10 Isolated Yes Eth1/1/12
Po10,101,1000
20 Community Yes Eth1/1/13
Po20,101,1000
30 Community Yes Eth1/1/14
Po30,101,1000
101 Primary Yes Eth1/1/11
Po100,1000
11 Isolated Yes Eth1/1/12
Po10,1000
21 Community Yes Eth1/1/13
Po20,1000
31 Community Yes Eth1/1/14
Po30,1000
Example (with
VLAN ID)
OS10# show vlan private-vlan 10
Primary Secondary Type Active Ports
------- --------- --------- ------ ---------------
100 Primary Yes Eth1/1/11
Po100-101,1000
10 Community Yes Po1000
Supported
Releases
10.5.2.0 or later
show vlan private-vlan primary
Displays the primary VLANs and their members (promiscuous) in the device.
Syntax
show vlan private-vlan primary
Parameters None
Command Mode EXEC
Usage
Information
Use this command to verify information about the primary VLANs.
Example
OS10# show vlan private-vlan primary
Primary Secondary Type Active Ports
------- --------- --------- ------ --------------
100 Primary Yes Eth1/1/11
Po100-101,1000
101 Primary Yes Eth1/1/11
Po100,1000
Supported
Releases
10.5.2.0 or later
678 Layer 2