Users Guide

show boot
Displays detailed information about the boot image.
Syntax
show boot [detail]
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
The Next-Boot field displays the image that the next reload uses.
Example
OS10# show boot
Current system image information:
===================================
Type Boot Type Active Standby Next-Boot
------------------------------------------------------------------------------------
---
Node-id 1 Flash Boot [A] 10.5.0.4 [B] 10.5.1.0 [B] standby
Example (detail)
OS10# show boot detail
Current system image information detail:
==========================================
Type: Node-id 1
Boot Type: Flash Boot
Active Partition: A
Active SW Version: 10.5.0.4
Active SW Build Version: 10.5.0.4.650
Active Kernel Version: Linux 4.9.189
Active Build Date/Time: 2020-02-11T11:13:08Z
Standby Partition: B
Standby SW Version: 10.5.1.0
Standby SW Build Version: 10.5.1.0.123
Standby Build Date/Time: 2020-02-12T02:34:02Z
Next-Boot: standby[B]
Supported
Releases
10.2.0E or later
show candidate-configuration
Displays the current candidate configuration file.
Syntax
show candidate-configuration [aaa | access-list | as-path | bfd | bgp |
class-map | community-list | compressed | control-plane | dot1x |
extcommunity-list | evpn | fefd | igmp | interface [virtual-network vn-id]
| ip dhcp snooping | lacp | line | lldp | logging | management-route | mld
| monitor | ntp | nve | ospf | ospfv3 | password-attributes | pim | policy-
map | port-security | prefix-list | privilege | qos-map | radius-server |
route | route-map | sflow | smartfabric | snmp | spanning-tree | support-
assist | system-qos | tacacs-server | telemetry | trust-map | uplink-state-
group | userrole | users | virtual-network | vlt | vrf | wred-profile]
Parameters
● aaa — (Optional) Current operating AAA configuration.
● access-list — (Optional) Current operating access-list configuration.
● as-path — (Optional) Current operating as-path configuration.
● bfd — (Optional) Current operating BFD configuration.
● bgp — (Optional) Current operating BGP configuration.
● class-map — (Optional) Current operating class-map configuration.
● community-list — (Optional) Current operating community-list configuration.
88 CLI Basics