Deployment Guide

24 VCF on VxRail Multirack Deployment using BGP EVPN
DHCP scope values
ID
DHCP server IP
address
Start IP
address
End IP address
Gateway
Subnet
mask
Rack 1
10.10.14.5
172.25.101.1
172.25.101.199
172.25.101.253
/24
Rack 2
10.10.14.5
172.25.102.1
172.25.102.199
172.25.102.253
/24
5.4 Switch preparation
5.5 Check switch OS version
Dell EMC PowerSwitches must be running OS10EE version 10.4.3.5 or later for this deployment.
Run the show version command to check the OS version. Dell EMC recommends upgrading to the latest
release available on Dell Digital Locker (account required).
OS10# show version
Dell EMC Networking OS10-Enterprise
Copyright (c) 1999-2019 by Dell Inc. All Rights Reserved.
OS Version: 10.4.3.5
Build Version: 10.4.3.5
Note: For information about installing and upgrading OS10EE, see the Dell EMC Networking OS10
Enterprise Edition Quick Start Guide.
5.6 Verify license installation
Run the show license status command to verify the license installation. Verify that the License Type:
field shows PERPETUAL, as shown in the following example.
Note: If an evaluation license is installed, licenses purchased from Dell EMC are available for download on
Dell Digital Locker. Installation instructions are provided in the OS10 Enterprise Edition User Guide Release
10.4.3.0.
OS10# show license status
System Information
---------------------------------------------------------
Vendor Name : Dell EMC
Product Name : S5248F-ON
Hardware Version : A01
Platform Name : x86_64-dellemc_s5248f_c3538-r0
PPID : CN046MRJCES0089K0004
Service Tag : 68X00Q2
Product Base :
Product Serial Number:
Product Part Number :
License Details
----------------
Software : OS10-Enterprise