Owners Manual

● ipmi sol payload <enable|disable|status>[channel][userid]
● ipmi sol activate [<usesolkeepalive|n)eepalive>][instance=<number>]
● ipmi sol deactivate [instance=<number>]
● ipmi sol looptest [<loop times>[<loop interval(in ms)>[<instance>]]]
● ipmi user summary [<channel number>]
● ipmi user list [<channel number>]
● ipmi user set name <user id><username>
● ipmi user set password <user id>[<password><16|20>]
● ipmi user disable <user id>
● ipmi user enable <user id>
● ipmi user priv <user id><privilege level>[<channel number>]
● ipmi user test <user id><16|20>[<password>]
● ipmi channel authcap <channel number><max privilege>
● ipmi channel getaccess <channel number>[user id]
● ipmi channel setaccess <channel number><user id>[callin=on][ipmi=on|off][link=on]
[privilege=level]
● ipmi channel info [channel number]
● ipmi channel getciphers <ipmi | sol>[channel]
● ipmi session info <active | all | id 0xnnnnnnn | handle 0xnn>
● ipmi dcmi discover
● ipmi dcmi power<command> reading
● ipmi dcmi power<command> get_limit
● ipmi dcmi power<command> set_limit
● ipmi dcmi power<command> activate
● ipmi dcmi power<command> deactivate
● ipmi dcmi sensors
● ipmi dcmi asset_tag
● ipmi dcmi set_asset_tag
● ipmi dcmi get_mc_id_string
● ipmi dcmi set_mc_id_string
● ipmi dcmi get_temp_reading
● ipmi dcmi get_conf_param
● ipmi dcmi set_conf_param
● ipmi dcmi oob_discover
● ipmi shell
● ipmi exec
● ipmi set
○ Options are:
○ hostname <host> : Session hostname
○ username <user> : Session username
○ password <pass> : Session password
○ privlvl <level> : Session privilege level force
○ authtype <type> : Authentication type force
○ localaddr <addr> : Local IPMB address
○ targetaddr <addr> : Remote target IPMB address
○ port <port> : Remote RMCP port
○ csv [level] : Enable output in comma-separated format
○ verbose [level] : Verbose level
36
IPMI commands