Owners Manual

Figure 3. Boot up screen

Figure 4. BIOS setup and configuration screen

2. Use the scrollbar on the right side of the console window to scroll up to display the BIOS and CPLD versions.

Figure 5. Display BIOS and CPLD versions

Update BMC in DIAG OS

Use the following DIAG OS command to update BMC:

updatetool -D MAIN-BMC -U -e ./<platform>-BMC-vx.xx.ima

NOTE:

Switch to the BMC console to monitor the BMC update status. Confirm BMC updates. Reboot the system. Go to

the BIOS update.

Update the BMC using the following command:

#updatetool -D MAIN-BMC -U - e <BMC_update_filename>

Replace <BMC_update_filename> with the file from the USB drive that is mounted.

Firmware update