Owners Manual

You are prompted for confirmation. Press y and enter to continue. When the update is complete, you must power cycle the

system.

root@dellemc-diag-os:~# updatetool -D MAIN-BMC -U -e

<BMC_update_filename>

disable preserve BIOS configration

Disable device protect

Disable MAIN-BMC protect operation success, wait HW reset

Write image to MAIN-BMC

INFO: Yafu INI Configuration File not found... Default options will not be applied...

Creating IPMI session via USB...Done

---------------------------------------------

YAFUFlash - Firmware Upgrade Utility (Version 4.112.0)

---------------------------------------------

Image To be updated is (Image-1)

===================================================

Firmware Details

===================================================

RomImage Image 1 Image 2

ModuleName Description Version Version Version

1. boot BootLoader 0.2.000000 0.2.000000 0.2.000000

2. conf ConfigParams 0.20.000000 0.20.000000 0.20.000000

3. root Root 0.20.000000 0.20.000000 0.20.000000

4. osimage Linux OS 0.20.000000 0.20.000000 0.20.000000

5. www Web Pages 0.20.000000 0.20.000000 0.20.000000

6. testapps 0.20.000000 0.20.000000 0.20.000000

7. ast2500e 1.0.000000 1.0.000000 0.20.0

Existing Image and Current Image are Same

So,Type (Y/y) to do Full Firmware Upgrade or (N/n) to exit

Enter your Option : y

****************************************************

WARNING!

FIRMWARE UPGRADE MUST NOT BE INTERRUPTED ONCE IT IS STARTED.

PLEASE DO NOT USE THIS FLASH TOOL FROM THE REDIRECTION CONSOLE.

****************************************************

Uploading Firmware Image : 100%... done

Skipping [boot] Module ....

Flashing [conf] Module ....

Flashing Firmware Image : 100%... done