Deployment Guide

● evi id — Displays the host MAC addresses and next hops in a specified EVPN instance, from 1 to
65535. To filter the output, display information on the host MAC address count for an EVPN ID or for
a next-hop IP address, and BGP routes for a specified MAC address.
Default Not configured
Command mode EXEC
Usage
information
Use this command to display the BGP routes for host MAC addresses in EVPN instances. The type 2
routes received from the remote VTEP is displayed only if there is a corresponding EVI configured locally.
Examples
OS10# show evpn mac
Type -(lcl): Local (rmt): remote
EVI Mac-Address Type Seq-No Interface/Next-Hop
50 00:00:00:aa:aa:aa rmt 0 55.1.1.3
OS10# show evpn mac count
Total MAC Entries :
Local MAC Address Count : 2
Remote MAC Address Count : 5
OS10# show evpn mac evi 811 count
EVI 811 MAC Entries :
Local MAC Address Count : 1
Remote MAC Address Count : 2
OS10# show evpn mac evi 811 next-hop 80.80.1.8 count
EVI 811 next-hop 80.80.1.8 MAC Entries :
Remote MAC Address Count : 2
Supported
releases
10.4.2.0 or later
show evpn mac-ip
Displays the BGP EVPN Type 2 routes used for host MAC-IP address binding.
Syntax
show evpn mac-ip [count | evi evi [mac-address mac-address] | mac-address
mac-address | next-hop ip-address]
Parameters
● count — Displays the total number of MAC addresses in EVPN MAC-IP address binding.
● evi evi — Enter an EVPN instance ID, from 1 to 65535.
● host ip-address — Enter the IP address of a host that communicates through EVPN routes.
● mac-address mac-address — Enter the MAC address of a host that communicates through
EVPN routes in the format nn:nn:nn:nn:nn.
● next-hop ip-address — Enter the IP address of a next-hop switch.
Default Not configured
Command mode EXEC
Usage
information
Use this command to view the MAC-IP address binding for host communication in VXLAN tenant
segments. The type 2 routes received from the remove VTEP is displayed only if there is a corresponding
EVI configured locally.
Example
OS10# show evpn mac-ip
VXLAN 71