Install Guide

Specifications

This section lists the Z9264F-ON switch specifications.

CAUTION: Operate the product at an ambient temperature not higher than 45°C (113°F).

CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only

with same or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.

NOTE: For RoHS information, see Restricted Material Compliance.

Topics:

• Chassis physical design

• IEEE standards

• Agency compliance

• USA Federal Communications Commission FCC statement

• European Union EMC directive conformance statement

• Japan VCCI compliance for class A equipment

• Korean certification of compliance

• China warning

• Safety standards and compliance agency certifications

• Electromagnetic compatibility

• Product recycling and disposal

Chassis physical design

Table 5. Chassis physical design

Parameter Specifications

Height 3.37 inches (85.6 mm)

Width 17.4 inches (442 mm)

Depth

Chassis: 20.0 inches (510 mm)

PSU/fan tray handle: 1.38 inches (35 mm)

Chassis weight with factory-installed components

34.6 lbs (2 PSUs and 4 fans)

15.7 kg (2 PSUs and 4 fans)

Rack clearance required

Front: 5 inches (12.7 cm)

Back: 5 inches (12.7 cm)

Table 6. Environmental parameters

Parameter Specifications

Operating temperature 0°C to 45°C (32°F to 113°F)

-5°C to 45°C (23°F to 113°F) short term

Short term is </= 1% of operational hours per year.

NOTE: Reduce maximum temperature by 1°C/125

meters (1°F/228 feet) above 950 meters (3,117 feet).

Specifications 37