Reference Guide

OS10(conf-vfabric-100)# zoneset activate set
OS10(conf-vfabric-100)# zone default-zone permit
View FC zone conguration
OS10(config-fc-zone-hba1)# show configuration
!
fc zone hba1
member wwn 21:00:00:24:ff:7b:f5:c8
member wwn 10:00:00:90:fa:b8:22:19
OS10# show fc zone
Zone Name Zone Member
=================================================
hba1 21:00:00:24:ff:7b:f5:c8
10:00:00:90:fa:b8:22:19
hba2 20:01:00:0e:1e:e8:e4:99
50:00:d3:10:00:ec:f9:1b
50:00:d3:10:00:ec:f9:05
50:00:d3:10:00:ec:f9:1f
20:35:78:2b:cb:6f:65:57
View FC zoneset conguration
OS10(conf-fc-zoneset-set)# show configuration
!
fc zoneset set
member hba1
member hba2
OS10# show fc zoneset active
vFabric id: 100
Active Zoneset: set
ZoneName ZoneMember
================================================
hba2 *20:01:00:0e:1e:e8:e4:99
20:35:78:2b:cb:6f:65:57
50:00:d3:10:00:ec:f9:05
50:00:d3:10:00:ec:f9:1b
50:00:d3:10:00:ec:f9:1f
hba1 *10:00:00:90:fa:b8:22:19
*21:00:00:24:ff:7b:f5:c8
OS10# show fc zoneset set
ZoneSetName ZoneName ZoneMember
==========================================================
set hba1 21:00:00:24:ff:7b:f5:c8
10:00:00:90:fa:b8:22:19
21:00:00:24:ff:7f:ce:ee
21:00:00:24:ff:7f:ce:ef
hba2 20:01:00:0e:1e:e8:e4:99
50:00:d3:10:00:ec:f9:1b
50:00:d3:10:00:ec:f9:05
50:00:d3:10:00:ec:f9:1f
20:35:78:2b:cb:6f:65:57
F_Port on Ethernet
OS10 supports conguring F_Port mode on an Ethernet port that is connected to converged network adapters (CNA).
After enabling F_Port mode, congure a vfabric and apply the vfabric to Ethernet ports connected to CNA.
130
Fibre Channel