Reference Guide

"type": "iana-if-type:ieee8023adLag",
"name": "port-channel10",
"enabled": "true"
}]
}
Parameters
• port-channelid-number — Enter port-channelid-number, where port-channel id-number
is from 1 to 128.
• type string — Enter iana-if-type:ieee8023adLag for a port-channel interface.
• name string — Enter port-channelid-number.
• enabled bool — Enter true (no shutdown) to enable the port channel; enter false (shutdown) to
disable the port channel.
Example
curl -X PATCH -k -u admin:admin -H "accept: application/json"
-H "Content-Type: application/json"
"https://10.11.86.113/restconf/data/interfaces/interface/port-channel10"
-d '{"interface":[{"type":"iana-if-type:ieee8023adLag", "name":"port-
channel10","enabled":"true"}]}'
Add member interface to static port channel
RESTCONF
endpoint
/restconf/data/interfaces/interface/port-channel10
JSON content
{
"interface": [{
"name": "port-channel10",
"lag-mode": "STATIC",
"member-ports": [{
"name": "ethernet1/1/2"
}]
}]
}
Parameters
• port-channelid-number — Enter port-channelid-number, where port-channel id-number
is from 1 to 128.
• name string — Enter port-channelid-number.
• lag-mode bool — Enter STATIC for a statically congured port channel; enter DYNAMIC for a dynamically
congured port channel.
•
ethernet-interface — Enter the physical Ethernet interface in the format ethernetnode/slot/
port.
Example
curl -X PATCH -k -u admin:admin -H "accept: application/json"
-H "Content-Type: application/json"
"https://10.11.86.113/restconf/data/interfaces/interface/port-channel10"
-d '{"interface":[{"name":"port-channel10", "lag-mode":"STATIC",
"member-ports":[{"name":"ethernet1/1/2"}]}]}'
Add member interface to dynamic port channel
RESTCONF
endpoint
/restconf/data/interfaces/interface/port-channel20
JSON content
{
"interface": [{
"name": "port-channel20",
"lag-mode": "DYNAMIC",
796 RESTCONF API