Owner's manual

Back to Contents Page
Specifications: Dell
TM
PowerVault
TM
110T LTO-3 Tape Drive User's Guide
General
External Drive
Internal Drive
NOTE: These specifications are provided by the manufacturer for information purposes only and do not constitute an extension of Dell's warranty to
you. Dell's warranty is contained in the documentation for your system.
General
Manufacturer
Manufactured for Dell
Model Number
DELL PowerVault 110T LTO-3 Tape Drive: LTO Internal; LTO
External
Interface Type
Ultra160 Low Voltage Differential (LVD) SCSI bus
External Drive
Physical Specifications
Width
24.9 cm (9.8 in)
Length
29.0 cm (11.42 in)
Height
12.5 cm (4.92 in)
Weight
6.45 kg (14.2 lb)
Power Requirements
AC line voltage
100–240 VAC
Line frequency
50–60 Hz, auto-ranging
Line current at 100 VAC
0.58 A
Line current at 240 VAC
0.24 A
Performance
Interface
Ultra160 LVD SCSI
Recording format
LTO Ultrium Generation 3
Media
LTO Ultrium
Capacity
400 GB (native) 800 GB (compressed, assuming 2:1
compression)
Data transfer rate
Native 80 MB/sec, at maximum compression 135 MB/sec
Burst transfer rate
up to 160 MB/sec
Operating Limits
Temperature
10°to35°C(50°to95°F)
Humidity
20% to 80% relative humidity (noncondensing)
Maximum wet bulb temperature
23°C(73.4°F)
Maximum altitude
3048 m (10,000 ft)
Nonoperating Limits (Storage or Shipping)
Temperature
-40°to65°C(-40°to149°F)
Humidity
5% to 95% relative humidity (noncondensing)
Maximum wet bulb temperature
23°C(73.4°F)