Manual

Bulk Load 
Bulk Load allows you to move multiple tapes from the magazines to the rear slots with one command. For more information on partitioning, see Configure
Step 4 Press and to select the target
slot.
Step 5 Press to highlight Run ( ) and
then press .
The media is moved from the specified
source to the specified target location.
Step 6 A confirmation screen displays. Press
to dismiss.

Step 7 You can continue to move media, or
you can exit to the Command menu. Press
twice to return to the Command menu.

Partitions.
Path:
Unpartitioned Library Bulk Load
Partitioned Library Bulk Load
Selection
Description/Result
Step 1 From the Command menu, highlight
and press .
Moves cartridges from magazines to rear
slots.
Step 2 The bulk load operation begins. The
operation can be canceled at any time by
pressing .
The library will begin loading the rear slots
by selecting the left-most available cartridge
in the front left magazine, and placing it in
the left-most available rear slot. The Bulk
Load will continue until either there are no
more tapes in the front magazines, or there
are no more available slots in the rear.
Step 3 When the bulk load is complete, a
completion screen is displayed. Press to
dismiss the screen.

Selection
Description/Result
Step 1 From the Command menu, highlight
and press .
Moves cartridges from magazines to
partitioned rear slots.
Step 2 Press and to select the
partition you want to move cartridges to.
Available options are:
l Partition 1: will move cartridges from
the left magazine to the available rear
Partition 1 slots.
l Partition 2: will move cartridges from
the right magazine to the available
rear Partition 2 slots.
Step 3 Press to highlight Run ( ) and
