Manual

Stop Sequential Backup
Stop allows you to manually stop the backup process when in sequential mode.
Resume Sequential Backup
Resume allows you to continue a backup process when in sequential mode. The load operation will continue with the next tape in the sequence rather than
starting over.
and press .
Step 2 Highlight and press .
Starts single sequential backup.
Step 3 Press and to select the
partition you want to set to sequential single
mode.

Step 4 Press to highlight Run ( ) and
then press .
A single sequential backup begins.
Selection
Description/Result
Step 1 From the Command menu, highlight
and press .
Sets options for sequential backup.
Step 2 Highlight and press .
Stops sequential backup.
Step 3 Press and to select the
partition you want to stop the sequential
backup on.

Step 4 Press to highlight Run ( ) and
then press .
The backup process is stopped.
Selection
Description/Result
Step 1 From the Command menu, highlight
and press .
Sets options for sequential backup.
Step 2 Highlight and press .
Continues sequential backup.
Step 3 Press and to select the
partition you want to resume the sequential
backup on.

Step 4 Press to highlight Run ( ) and
then press .
The backup process is resumed.