Manual

Display Motion Counts
Selection
Description/Result
Step 1 From the Status menu, highlight
and press .
Displays the current library cartridge
content.
Step 2 Press and to scroll through the
various slots. An arrow in front of the slot
indicates it slot is selected.

The inventory screen provides a visual
representation of the storage slots in your
library.
Magazine slots:
l shown on the bottom of the screen
l numbered sequentially from left to
right 01 to 14 for LTO or 01 to 12 for
SDLT-320
l the magazines slots will not be
shown if the magazines are not
installed
Rear slots:
l shown on the top of the screen
l numbered sequentially from left to
right 15 to 23 for LTO or 13 to 20 for
SDLT-320
l double bar will be shown in rear slots
to show partition
l a horizontal bar will close off slots
reserved for cleaning
IE slot:
l shown on the bottom right of the
screen
l arrows indicate configured as IE
slot (represented by IE in slot field)
l vertical bars indicate configured as
data slot (represented by 00 in slot
field)
Barcode Scanner results:
l shown on middle of screen and
changes as various slots are selected
l blank: scanner not installed
l Scan Off: scanner installed but turned
off
l No Label: no barcode label present or
unable to read label
l number: displays barcode label
l number of cleaning operations left on
the tape will be shown instead of a
barcode for full cleaning slots
Drives:
l shown on top right of the screen
Selection
Description/Result
Step 3 To exit, press to highlight and
then press .
You are returned to the Status menu.