Specifications

Secure Dialog
When Secure is selected, the Secure Dialog is displayed. See Figure 77. This option allows the user to enable or disable operator panel security
and set or change the library password.
CAUTION: Set a user selected password during the first initialization of the new library, and safely store a copy of it for future
reference. Refer to the Secure Dialog. Press the button beneath the Next softkey to make the Set/Change Password the currently
active blackened field. Press the button beneath the Change softkey. Enter a user selected password when prompted, then select
OK. See Figure 80. To save the change press the button beneath the OK softkey in the Secure Dialog screen.
CAUTION: If security is enabled, all Menu Selections with a few exceptions, throughout the entire Dell PowerVault 136T LTO
Library will require the user selected password. Refer to Enter Password Dialog. If security is enabled and the user selected
password is lost, Contact Dell Customer Support.


Figure 77. Setup > Utils > Secure Dialog
To choose one of the four selections, follow the step.
Step 1 Press the button beneath the desired softkey.
l If the button beneath the OK softkey is pressed, the Utils Submenu is displayed if no security changes are made.
CAUTION: If security and/or password changes are made, they are saved when the button beneath the OK softkey is
pressed.
l If Enable Security is the active field that is blackened, see Figure 77:
¡ If the button beneath the Yes/No softkey is pressed, the checkbox will change.
n If yes, the checkbox is checked and the Security On Dialog is displayed.
n If no, the checkbox is unchecked and the Security Off Dialog is displayed.
¡ If the button beneath the Next softkey is pressed, the next field Set/Change Password, is made the currently active field.
l If Set/Change Password is the active field that is blackened, the Yes/No softkey becomes a Change softkey, see Figure 77.
¡ If the button beneath the Change softkey is pressed, the Change Password Dialog is displayed.
¡ If the button beneath the Next softkey is pressed, the next field Enable Security, is made the currently active field, see Figure 77.
l If the button beneath the Cancel softkey is pressed,
¡ If no security or password changes are made, the Utils Submenu is displayed.
¡ If security or password changes are made, refer to Figure 78.

Figure 78. Setup > Utils > Secure > Security On > Cancel Security Changes Dialog
To choose one of the two selections, follow the step.
Step 2 Press the button beneath the desired softkey.
l If the button beneath the OK softkey is pressed, the security and/or password changes are canceled and the Utils Submenu is displayed.
l If the button beneath the Cancel softkey is pressed, the Secure Dialog is redisplayed.
Active Field
Value
Description
Enable Security
Operator Panel Security is enabled when checked. See Figure 77.
Operator Panel Security is disabled when unchecked.