Dell™ PowerVault™ 220S and 221S Systems Updating the Enclosure Management Module Firmware w w w. d e l l . c o m | s u p p o r t . d e l l .
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. ____________________ Information in this document is subject to change without notice. © 2004 Dell Inc. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865bk0TOC.fm Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 . . . . . . . . . . . 6 . . . . . . . . . . . . . . . . . 7 Updating Firmware Using Dell Update Packages . . . . . . . . . . . . . . 8 Windows DUP Update Procedure . . . . . Red Hat Enterprise Linux Update Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 8 . . . . . . . . . . . .
FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865bk0TOC.
FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm This document describes how to update the firmware on the primary and secondary enclosure management modules (EMMs) in your Dell™ PowerVault™ 220S or 221S storage system. The following tools are available to update your storage system firmware: • Dell OpenManage™ Array Manager — System management software, running in supported operating system environments.
FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm www.dell.com | support.dell.com Table 1.1 lists the required tool and files for applying an update to your storage system. Table 1-1. Firmware Update Procedures Operating System Microsoft® Windows® 2000 Server and Advanced Server Download File Array Manager DUP Update Utility FUPG_Exx.exe (A.M.) or PV220s-221s-FRMWRxxxxx.exe (DUP) Microsoft Windows Server™ 2003 FUPG_Exx.exe (A.M.) or PV220s-221s-FRMWRxxxxx.
FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm 3 Restart node 2. 4 Open the Disk Management Service. 5 In the Disk Management Service window, verify that the PowerVault 22xS storage system appears. If the storage system does not appear in the window, restart the cluster node.
FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm www.dell.com | support.dell.com Updating Firmware Using Dell Update Packages Dell Update Packages (DUPs) are software utilities provided by Dell to update specific software components on your Dell system. DUPs provide an easy-to-use graphical user interface (GUI) that enables you to apply a software update to either a single system or, remotely, to multiple systems using your organization’s software distribution tools.
FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm 5 Type the following script command in the command line: sh ./PV220s-221s-FRMW-Rxxxxx.bin -q where -q forces the command to run without user intervention. 6 Press to update the firmware. When the update completes, a message appears indicating that the update was successful. 7 Restart I/O activity to the storage system.
FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm www.dell.com | support.dell.com 6 Run the extracted .exe file from the command console. An information screen appears listing the available command line options. 7 Review the available command line options and note the ones you need to use for your system configuration. 8 Type the .
FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm 6 Uncompress the two downloaded files, as follows: • For FUPG_Exx.exe — Double-click on FUPG_Exx.exe or run the file from the command prompt. • For pv2xxAxx.gz — Use the tar command at the command prompt. For example: tar -zxvf pv22xAxx.gz 7 Change the file permissions for the extracted .exe file.
www.dell.com | support.dell.com FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm 5 Download the pv22xLxx.gz utility file from the Dell Support website at support.dell.com and save the utility to the directory you created in step 3. 6 Uncompress the .gz file. For example, in the command prompt, type the following and then press : tar -zxvf pv22xLxx.gz Included in the extracted files are an .exe utility file and a .bin firmware file.
FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm Updating the Storage System in Split-Bus Mode For storage systems in split-bus mode, updating the firmware to one EMM does not automatically update the other EMM. Each EMM must be updated from the host system that is attached to it. Array Manager displays the correct firmware version for the EMM to which it is connected, but may continue to report the old firmware version on the other EMM.
www.dell.com | support.dell.com FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.
