Manual

Configuring the PowerVault 35F: Dell PowerVault 35F User's Guide
file:///C|/Users/rishi_sood/Desktop/35F/ug/config_2.htm[3/21/2013 11:16:19 AM]
Auto addressing allows you to assign one of three mapping priorities:
LUN priority – fills the table according to ascending LUN order.
Target ID priority – Fills the table according to ascending SCSI Target ID (SCSI device address ID) order.
Bus Number priority – Fills the table in ascending SCSI Bus Number (SCSI port ID number) order.
SCSI-to-Fibre Channel Mapping Configuration
This option allows modification of the table mapping SCSI Target:LUN values to Fibre Channel Node:LUN values.
Configuration of these devices is similar to that for indexed addressing, without the user assists. Prior to configuring
these tables, the user must enable the SCSI target and initiator addresses desired to enable the mapping for that SCSI
device.
Enter the LUN number of the entry you want to change.
Trace Settings Configuration
This option allows trace levels to be set. This should not be modified in normal operation, as performance degradation
may result.