User`s guide

Script Commands 183
Parameters
Set Physical Disk State
This command sets a physical disk to the failed state. To return a physical disk
to the Optimal state, use the revive physicalDisk command.
Syntax
set physicalDisk [ enclosureID,slotID ]
operationalState=failed
Parameters
Set RAID Controller Module
This command defines the attributes for the RAID controller modules.
Syntax
set controller [(0 | 1)] availability=(online |
offline |
serviceMode) | ethernetPort [(1 | 2)]=
ethernetPortOptions |
Parameter Description
physicalDisk or
physicalDisks
Identifies the enclosure and slot where the physical disk
resides. Enclosure ID values are 0 to 99. Slot ID values
are 0 to 31. You must put brackets ([ ]) around the
enclosure ID values and the slot ID values.
hotSpare Assigns the physical disk as the hot spare. To assign the
physical disk as the hot spare, set this parameter to
TRUE. To remove a hot spare assignment from a
physical disk, set this parameter to FALSE.
Parameter Description
physicalDisk Identifies the enclosure and slot where the physical disk
resides. Enclosure ID values are 0 to 99. Slot ID values
are 0 to 31. You must put brackets ([ ]) around the
enclosure ID value and the slot ID value.