Users Guide

1-14 Rack Installation Guide
5. Install the strain-relief bracket to the back of the system (see Figure 1-12):
a. Thread the I/O cables you connected in step 4 through the slots of the strain-
relief bracket.
b. Insert the ends of the four long portions of the strain-relief bracket into the
four matching holes beside the hinge bracket.
c. Secure the captive thumbscrew to the back of the system.
Figure 1-12. Attaching the Strain-Relief Bracket
6. Connect the remaining cables to the system.
For details, see your system’s
Installation and Troubleshooting Guide
or the
User’s Guide
.
bracket inserted
into four holes
strain-relief
bracket
captive
thumbscrew
Velcro strap
cables to
expansion
cards