Manual

2-6 Installation and Troubleshooting Guide
The System Setup Program
You can correct certain system problems by verifying the correct settings in the Sys-
tem Setup program. When you boot the system, the system checks the system
configuration information and compares it with the current hardware configuration. If
the system hardware configuration does not match the information recorded by the
System Setup program, an error message may appear on the screen.
This problem can happen if you changed the system's hardware configuration and for-
got to run the System Setup program. To correct this problem, enter the System
Setup program, correct the corresponding System Setup setting, and reboot the sys-
tem. See Chapter 3, “Using the System Setup Program,” in the
User's Guide for
detailed instructions on using the System Setup program.
87MPGbk0.book Page 6 Wednesday, December 13, 2000 2:14 PM