Manual

support.dell.com Running the Dell Diagnostics 4-5
Select
The Select option in the Device Groups menu allows you to choose one or more
devices from a particular device group. Three options are displayed: One, All,and
Help.
Config
Choosing Config from the Device Groups menu displays information about the par-
ticular device that is highlighted.
Error Messages
When you run a test in the diagnostics, error messages may result. Record the mes-
sages on a copy of the Diagnostics Checklist; also see Chapter 9, “Getting Help,” for
instructions on obtaining technical assistance and informing the technical assistance
representative of these messages.
Table 4-2. Parameters Options
Option Possible Values
Number of Times to Repeat
Te st( s)
0001 through 9999 or 0000, which loops indefi-
nitely until you press <Ctrl><Break>. The default
is 1.
Maximum Errors Allowed 0000 through 9999, where 0000 means that
there is no error limit. The default is 1.
Pause for User Response Ye s , No
Allows you to decide whether tests will wait for
user input.
The default is Ye s to wait for user input.
Message Logging None, Errors, All
Determines if any test results are saved to a file.
The default is None.
Message Logging File Name Specifies the name of the logging file if the Mes-
sage Logging option is selected. The default is A:
RESULT.
87MPGbk0.book Page 5 Wednesday, December 13, 2000 2:14 PM