Dell™ PowerVault™ 735N Systems TAPE BACKUP SOFTWARE UPDATE GUIDE www.dell.com support.dell.
Notes, Notices, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. WARNING: A WARNING indicates a potentially hazardous situation which, if not avoided, may result in severe injury.
About This Guide This document provides information about installing VERITAS® Backup Exec™ 8.0 and Computer Associates® ARCserve® 2000, and using this software to manage local backups. NOTE: Before installing the backup software, check http://support.dell.com for the latest driver updates for your software. You may need to install these updates after completing the procedures below.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m 9 10 Click Next. Click Yes to accept the software license agreement. The VERITAS Backup Exec Information window displays the system requirements and virtual memory recommendations. 11 Click Next. The Installing VERITAS Backup Exec window displays buttons that allow you to install Backup Exec or Remote Administrator. 12 Click the button to install VERITAS Backup Exec. The VERITAS Backup Exec Serial Numbers window displays.
19 Click Next. The VERITAS Backup Exec Setup window shows files being copied. After the files have been copied, the Service Account window displays. 20 In the User name and Password fields, enter the user name and password for the account that you want the system services to use. The user must have administrator privileges. 21 When the Previous Backup Exec Installation window displays, click OK. The VERITAS Windows NT/2000 Device Driver Installs Welcome screen displays. 22 Click Next.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m 29 Click Finish. 30 Remove the VERITAS Backup Exec CD from the CD-ROM drive. 31 Restart your NAS appliance. Installing VERITAS Backup Exec Remote Administrator on the Remote System 1 Insert the VERITAS Backup Exec CD in the CD-ROM drive of the remote system. The CD should autoplay. If it does not, open Microsoft® Windows® Explorer and right-click the CD-ROM drive that contains the VERITAS software. Select Autoplay from the menu.
10 Click Next. The Start Copying Files window displays what will be installed and where it will be installed. 11 Click Next. The Select Type of Program Group window displays. 12 Select Common Program Group or Private Program Group and then click Next. The Setup Complete window displays. 13 Click Finish. 14 Remove the VERITAS Backup Exec CD from the CD-ROM drive. Using VERITAS Backup Exec 8.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m Installing ARCserve 2000 on the NAS Appliance NOTE: You must first attach a keyboard, mouse, and monitor to the system before you install ARCserve 2000. ARCserve 2000 cannot be installed or managed using Terminal Services. 1 Insert the ARCserve 2000 CD in the CD-ROM drive of the NAS appliance. The CD should autoplay. If it does not, open Windows Explorer and right-click the CD-ROM drive that contains the ARCserve 2000 software.
12 Click OK. The ARCserve 2000 Setup Completed window displays. 13 Click Finish. You are prompted to restart your system. 14 Click No. You will restart your system after completely installing the software. 15 In the ARCserve 2000 Product Explorer, expand the Service Pack 1 for ARCserve 2000 tree, click Update ARCserve 2000 Workstation/Advanced Edition, and then click Install. Follow the instructions to complete installation.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m 6 Enter your name and organization and then click Next. The Setup Types window displays. 7 Select Custom and then click Next. The Select Database window displays. 8 Select ARCserve Standard Database or Microsoft SQL Database and then click Next. The Ready to Install the Program window displays. Select Microsoft SQL Database only if you use Microsoft SQL to store your backup database. 9 Click Install.
Using ARCserve 2000 Remote Manager 1 On the remote system, click the Start button and point to Programs→ ARCserve→ ARCserve Manager. The ARCserve Quick Access window displays. The ARCserve Quick Access window provides wizards for many common backup tasks. You can use these wizards or go through the standard menus to perform your backup tasks. 2 Enter the name of the NAS appliance in the Server field at the top of the screen to manage the backup software on the NAS appliance.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m • You cannot schedule a backup of a snapshot. You must do a manual backup of snapshot files because each snapshot file name is unique in that it includes the date and time (hour-minute-second) that the snapshot was taken. • 1-10 When you restore a snapshot, you must redirect the restore to a location other than the original snapshot location. A restore to the original location will not be successful.
