DELLTM PowerVaultTM DL Backup-to-Disk Appliance Powered by SymantecTM Backup ExecTM Configuring the Dell™ AX4-5 Fiber Channel Array as a Backup Target A Dell Technical White Paper by Dell Engineering Version 1.
Configuring a Dell™ AX 4-5 Fiber Channel Array as a Backup Target for Symantec™ Backup Exec™ THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY KIND. © 2010 Dell Inc. All rights reserved. Reproduction of this material in any manner whatsoever without the express written permission of Dell Inc. is strictly forbidden. For more information, contact Dell.
Configuring a Dell™ AX 4-5 Fiber Channel Array as a Backup Target for Symantec™ Backup Exec™ Table of Contents Executive Summary .................................................................................................. 2 Introduction ........................................................................................................... 2 Figure 1: Dell AX4-5F Array as a Backup Target .............................................................. 2 Prerequisites ................................
Configuring a Dell™ AX 4-5 Fiber Channel Array as a Backup Target for Symantec™ Backup Exec™ Executive Summary IT managers are concerned that traditional backup methods aren’t keeping up with the needs of the business. Existing backup and recovery operations often fail due to media management issues and human error associated with legacy tape backup methods. As data continues to explode within corporate environments, IT is having trouble meeting backup windows with standard tape-based solutions.
Configuring a Dell™ AX 4-5 Fiber Channel Array as a Backup Target for Symantec™ Backup Exec™ Prerequisites This paper assumes the following: The DL Backup to Disk Appliance is configured and fully operational. A supported Fiber Channel Host Bus Adapter has been installed in the DL backup to Disk Appliance and is attached to the SAN The Dell AX4-5F Array LUN(s) which will be used by the DL Backup to disk Appliance have been created.
Configuring a Dell™ AX 4-5 Fiber Channel Array as a Backup Target for Symantec™ Backup Exec™ Installing EMC software on the DL Backup to Disk Appliance This section explains the steps required to install the EMC software on the DL Backup to Disk Appliance. It assumes that the appropriate zoning has been configured to enable the Fiber Channel Host Bus Adapter (HBA) on the DL Backup to Disk Appliance to communicate with the Dell AX4-5F Array. These steps may require assistance from your SAN Administrator. 1.
Configuring a Dell™ AX 4-5 Fiber Channel Array as a Backup Target for Symantec™ Backup Exec™ 2. Click on Manage -> Connections. Ensure that the DL Backup to Disk Appliance is listed in the list of connected servers. (See Figure 3) Figure 3: List of connected servers in Navisphere Express 3. Click on Manage -> Virtual Disks. The list of available Virtual Disks is displayed. Click on the Virtual Disk that you want to assign to the DL Backup to Disk Appliance. 4. Click on the “Assign Server” button.
Configuring a Dell™ AX 4-5 Fiber Channel Array as a Backup Target for Symantec™ Backup Exec™ Using Navisphere Manager 1. Launch a Web Browser. Navigate to the Management port of the Dell AX4-5F Array and login to the EMC Navisphere Manager. 2. Expand the Dell AX4-5F Array. Right click on “Storage Groups” and select “Create Storage Group”. 3. Enter a name for the Storage Group and click OK. 4. Right Click on the newly created Storage Group and select “Connect Hosts”. 5.
Configuring a Dell™ AX 4-5 Fiber Channel Array as a Backup Target for Symantec™ Backup Exec™ Figure 6: Adding LUNs to the Storage Group Presenting the Dell AX4-5F LUNs to Symantec Backup Exec This section explains the configuration steps required on the DL Backup to Disk Appliance to present the LUNs on the Dell AX4-5F Array to Symantec Backup Exec 1.
Configuring a Dell™ AX 4-5 Fiber Channel Array as a Backup Target for Symantec™ Backup Exec™ Known Issues Issue: The storage space available on the Dell AX4-5F LUNs will not contribute to the “Available Disk Storage” numbers in the PowerVault DL Backup to Disk Appliance Console. Description: The PowerVault DL Backup to Disk Appliance Console reports available space of direct attached storage only.