Storage System Hardware Owner's Manual

56 Using the System Setup Program
Exit Screen
After you press <Esc> to exit the System Setup program, the Exit screen
displays the following options:
• Save Changes and Exit
• Discard Changes and Exit
• Return to Setup
System and Setup Password Features
NOTICE: The password features provide a basic level of security for the data on
your system. If your data requires more security, use additional forms of protection,
such as data encryption programs.
NOTICE: Anyone can access the data stored on your system if you leave the
system running and unattended without having a system password assigned or if
you leave your system unlocked so that someone can disable the password by
changing a jumper setting.
Your system is shipped to you without the system password feature enabled.
If system security is a concern, operate your system only with system password
protection.
To change or delete an existing password, you must know the password
(see "Deleting or Changing an Existing System Password" on page 59). If you
forget your password, you cannot operate your system or change settings in the
System Setup program until a trained service technician changes the password
jumper setting to disable the passwords, and erases the existing passwords.
This procedure is described in "Disabling a Forgotten Password" on page 164.
Using the System Password
After a system password is assigned, only those who know the password have
full use of the system. When the System Password option is set to Enabled,
the system prompts you for the system password after the system starts.
Book.book Page 56 Monday, September 14, 2009 12:57 PM