Manual

52 Restoring Your Operating System
4 Remove any diskette from the diskette drive, and press <Enter> to restart
your system.
If you do nothing, Windows Setup automatically restarts the system after
15 seconds.
When prompted,
do not press any key to boot from the media.
If
Console Redirection is enabled, the EMS Connection Detected
window appears. Click
OK to continue.
The
Windows Setup window appears and displays the installation
progress.
Next, the
Installing Device window appears, and your screen flashes a few
times. This behavior is normal.
Finally, the
Regional and Language Options window appears.
5 Review the displayed default settings.
If the default settings are correct, perform the following steps:
a Click Next .
The
Personalize Your Software window appears.
b Go to step 6.
If the default settings are
not correct, perform the following steps:
a Click Customize .
The
Regional and Language Options window appears.
b In the Regional Options tab, modify the regional and location
settings, if required, and click
OK .
The
Regional and Language Options window appears.
c Click Details .
The
Text Services and Input Languages window appears.
d In the Settings tab, modify the default input language and installed
services (if required), click
OK , and then click Next to continue.
The
Personalize Your Software window appears.