User Manual

Installing System Components 135
Figure 3-32. Removing the Control Panel Assembly
Installing the Control Panel Assembly
The following procedure applies to either a rack or tower system. Figure 3-32
illustrates a control panel assembly in the rack orientation.
1 Insert the control panel assembly display module into the chassis cutout
and secure with the two Torx screws.
2 Affix the control panel label to the display module.
1 display module
screws (2)
2 display module 3 display module cable
4 control panel board 5 control panel cable 6 screws (3)
7 system chassis 8 display module label
6
5
4
2
3
7
8
1
book.book Page 135 Monday, September 14, 2009 1:53 PM