Manualshelf

User Manual

ManualsBrandsDell ManualsComputer HardwarePowerVault DP600
141142143144145146147148149150
Installing System Components 143
6
Attach the cables from the power distribution board to the system board.
7
Attach the cables from the power distribution board to the SAS backplane
board.
8
Reconnect all cables from the system board to the SAS backplane board,
the control panel, and any tape or hard drives in the peripheral or flex bays.
9 Close the system. See
"Closing the System" on page 68
.
10 Reinsert the power supplies. See
"Installing a Power Supply" on page 80
.
11
Reconnect the system to the peripherals and electrical outlet, and turn on
the system.
book.book Page 143 Monday, September 14, 2009 1:53 PM