Owner's Manual

9
4 Perform one of the following actions on the management server where you
would like to manage the PowerVault MD Storage Array devices:
– Launch the Dell Discovery utility from the management console
(DellDiscoveryUtility.exe) to discover the PowerVault MD Storage
Arrays in the network, and update the IP listing file
(Dell_MDStorageArray_ip.cfg) with the IP addresses of the Storage
Arrays. Follow the input steps mentioned in the wizard and complete
the discovery process to generate the IP listing file.
– Manually update the
Dell_MDStorageArray_ip.cfg file with the IP
addresses of the storage arrays in the network.
Ensure that you
update the IP addresses ( IPv4 format or IPv6
format)in the semi-colon separated format, in a single line.
For example - 10.94.1.1;10.94.1.2;10.94.1.3;10.94.1.4;10.94.1.5
or
2001:db8:85a3::8a2e:370:7334;2001:db8:85a3::8a2e:370:7335
5 Import the management packs. For more information, see Importing the
Management Pack.
Importing the Management Pack
To import the MD Storage Arrays management packs, use the SCOM Import
Management Packs wizard:
1
Click Start  Programs  System Center Operations Manager 2007 and
select
Operations Console.
2 In Operations Console , click Administration on the navigation pane.
3 Expand the Administration tree, right-click Management Packs , and
select
Import Management Packs.
4 Click Add. Select Add from disk .
A5_bk0.book Page 9 Tuesday, August 30, 2011 2:53 PM