Deployment Guide

68 Troubleshooting Tools
You are prompted to
configure one network
instead of two during
Microsoft Failover
Cluster installation.
The TCP/IP configuration
is incorrect.
The node-to-node network and
public network must be assigned
static IP addresses on different
subnets. For more information
about assigning the network IPs,
see "Assigning Static IP
Addresses to Your Cluster
Resources and Components"S in
the Dell Failover Clusters with
Microsoft Windows Server 2003
Installation and Troubleshooting
Guide.
The private (point-to-
point) network is
disconnected.
Ensure that all systems are
powered on so that the NICs in
the private network are available.
Using Microsoft
Windows NT
®
4.0 to
remotely administer a
Windows Server
®
2003 cluster generates
error messages.
Normal. Some resources
in Windows Server 2003
are not supported in
Windows NT 4.0.
It is strongly recommends that
you use Microsoft Windows
®
XP
Professional or Windows Server
2003 for remote administration
of a cluster running Windows
Server 2003.
Table A-1. General Cluster Troubleshooting (continued)
Problem Probable Cause Corrective Action
book.book Page 68 Tuesday, April 15, 2008 12:30 PM