Dell PowerVault MD Series 存储阵列 管理员指南
注、小心和警告 注: “注”表示可以帮助您更好地使用计算机的重要信息。 小心: “小心”表示可能会损坏硬件或导致数据丢失,并说明如何避免此类问题。 警告: “警告”表示可能会造成财产损失、人身伤害甚至死亡。 © 2012 Dell Inc.
目录 注、小心和警告...........................................................................................................................2 章 1. 简介......................................................................................................................................15 Dell PowerVault Modular Disk Storage Manager .................................................................................................15 用户界面....................................................................................
虚拟磁盘容量扩展.........................................................................................................................................24 磁盘组扩展.....................................................................................................................................................24 磁盘组碎片整理.............................................................................................................................................24 磁盘组操作限制.................................................
更改机柜顺序.................................................................................................................................................38 配置警报通知........................................................................................................................................................39 配置电子邮件警报.........................................................................................................................................39 配置 SNMP 警报.......................................
管理主机端口标识符............................................................................................................................................56 章 7. 磁盘组、标准虚拟磁盘和精简虚拟磁盘...................................................................57 创建磁盘组和虚拟磁盘........................................................................................................................................57 创建磁盘组.................................................................................................................
更改磁盘组的 RAID 级别...............................................................................................................................78 使用 Linux DMMP 移除主机到虚拟磁盘的映射..........................................................................................79 受限映射................................................................................................................................................................80 存储分区..............................................................................
定位 SSD 高速缓存中的物理磁盘.......................................................................................................................99 向 SSD 高速缓存添加物理磁盘...........................................................................................................................99 从 SSD 高速缓存中移除物理磁盘.......................................................................................................................99 暂挂或恢复 SSD 高速缓存..............................................................................
将快照虚拟磁盘转换为可读写..........................................................................................................................116 查看单个存储库虚拟磁盘的关联物理组件.....................................................................................................116 创建一致性组......................................................................................................................................................116 创建一致性组存储库(手动).............................................................................
重新创建快照虚拟磁盘......................................................................................................................................142 禁用快照虚拟磁盘..............................................................................................................................................142 准备主机服务器以重新创建快照虚拟磁盘...............................................................................................143 重新创建快照虚拟磁盘...................................................................................
可供使用........................................................................................................................................................156 Linux 主机服务器重新引导最佳做法................................................................................................................156 有关特殊分区的重要信息..................................................................................................................................156 限制和已知问题.................................................................
复制存储库虚拟磁盘..........................................................................................................................................172 复制存储库虚拟磁盘的 RAID 级别...................................................................................................................172 主要和次要虚拟磁盘对......................................................................................................................................172 配合使用远程复制(传统)和其他功能...........................................................
章 17. 管理固件下载................................................................................................................187 下载 RAID 控制器和 NVSRAM 软件包...............................................................................................................187 同时下载 RAID 控制器和 NVSRAM 固件..........................................................................................................187 仅下载 NVSRAM 固件...................................................................................................
章 21. 获得帮助.........................................................................................................................209 与 Dell 联络..........................................................................................................................................................
1 简介 小心: 按照本文档中所列任意步骤进行操作之前,请参阅 Safety, Environmental, and Regulatory Information (安全、环境和管制信息)说明文件以了解重要安全信息。 本说明文件帮助您熟悉 Dell PowerVault MD Series 存储阵列的功能。本说明文件按照您收到存储阵列后必须完 成的任务进行组织。 Dell PowerVault Modular Disk Storage Manager Dell PowerVault Modular Disk Storage Manager (MD Storage Manager) 是用于配置和管理一个或多个 MD Series 存 储阵列的图形用户界面 (GUI) 应用程序。MD Storage Manager 软件位于 MD Series 资源 DVD 中。 用户界面 Storage Manager 屏幕可分为两个主要窗口: • • 企业管理窗口 (EMW) - EMW 提供对多个存储阵列的高级别管理。可从 EMW 启动存储阵列的阵列管理窗 口。 阵列管理窗口 (AMW) - AMW 提供针对单个
• 手动添加和移除主机与存储阵列。 • 闪烁或定位存储阵列。 • 命名或重命名找到的存储阵列。 • 在表视图中对存储阵列添加注释。 • • 将 EMW 视图首选项和配置数据存储在本地配置文件中。下次打开 EMW 时,本地配置文件中的数据将 用于显示自定义的视图和首选项。 监测托管存储阵列的状态,并使用相应的图标来指示状态。 • 添加或移除管理连接。 • 通过电子邮件或 SNMP 陷阱为所选的各个存储阵列配置警报通知。 • 向配置的警报目标报告严重事件。 • 为所选的存储阵列启动 AMW。 • 运行脚本以在特定存储阵列上执行批处理管理任务。 • 将操作系统主题设置导入 MD Storage Manager。 • 同时在多个存储阵列上升级固件。 • 获取有关固件资源清点的信息,包括存储阵列中的 RAID 控制器模块、物理磁盘和机柜管理模块 (EMM) 的版本。 继承系统设置 请使用继承系统设置选项将操作系统主题设置导入 MD Storage Manager。导入系统主题设置会影响 MD Storage Manager 的字体、字体大小、颜色和对比度。 1.
– 存储和复制服务 – 主机与映射 – 有关存储容量的信息 – 高级功能 • 存储和复制服务选项卡 - 可以通过存储阵列的虚拟磁盘、磁盘组、可用容量节点和任何未配置的容量查 看和管理存储阵列的组织。 主机映射选项卡 - 可以定义主机、主机组和主机端口。可以通过更改映射向主机组和主机授予对虚拟磁 盘的访问权限并创建存储分区。 硬件选项卡 - 可以查看和管理存储阵列的物理组件。 • 设置选项卡 - 显示存储阵列的初始设置任务列表。 • • 可在 AMW 中执行以下操作: • 选择存储阵列选项,例如,重命名存储阵列、更改密码或启用后台介质扫描。 • 从存储阵列容量配置虚拟磁盘和磁盘池,定义主机和主机组,向主机或主机组授予多组虚拟磁盘(称 为存储分区)的访问权限。 • 监测存储阵列组件的运行状况,使用相应图标报告详细状态。 • 对发生故障的逻辑组件或硬件组件执行恢复程序。 • 查看存储阵列的事件日志。 • 查看有关硬件组件的配置文件信息,例如 RAID 控制器模块和物理磁盘。 • 管理 RAID 控制器模块 - 例如,更改虚拟磁盘的所有权,或者联机或脱机放置 RAID 控制器模块
• 有关本说明文件中所用缩写或缩略词的全称,请参阅 dell.com/support/manuals 上的 Glossary(词汇 表)。 注: 请经常访问 dell.
关于 MD Series 存储阵列 2 本章介绍有助于配置和操作 Dell MD Series 存储阵列的存储阵列概念。 物理磁盘、虚拟磁盘和磁盘组 存储阵列中的物理磁盘为数据提供物理存储容量。在可以开始将数据写入存储阵列之前,必须将物理存储容量 配置为逻辑组件,这些逻辑组件称为磁盘组和虚拟磁盘。 磁盘组是一组物理磁盘,可在其上创建多个虚拟磁盘。对于 RAID 0、RAID 1 和 RAID 10,磁盘组中支持的最大 物理磁盘数为 96 个磁盘,对于 RAID 5 和 RAID 6 则为 30 个驱动器。可从存储阵列上的未配置容量创建磁盘组。 虚拟磁盘是磁盘组中的一个分区,该分区由磁盘组中物理磁盘的连续数据段组成。虚拟磁盘包括磁盘组中所有 物理磁盘的数据段。 磁盘组中的所有虚拟磁盘都支持相同的 RAID 级别。存储阵列最多支持 255 个可分配至主机服务器的虚拟磁盘 (每个大小至少为 10 MB)。每个虚拟磁盘均分配有可由主机操作系统识别的逻辑单元号 (LUN)。 虚拟磁盘和磁盘组根据整理数据的计划来设置。例如,可将一个虚拟磁盘用于存储库存信息,将第二个虚拟磁 盘用于存储财务和税务信息等等。 物理磁盘
状态 模式 说明 待处理故障 “已分配”、“未分配”、“正 在指示的插槽中的物理磁盘上检测到自我监测分析 在使用热备用设备”或“热备用 和报告技术 (SMART) 错误。 设备处于待机状态” 脱机 不适用 识别 “已分配”、“未分配”、“正 正在识别物理磁盘。 在使用热备用设备”或“热备用 设备处于待机状态” 物理磁盘已降速或根据用户请求停止重建。 自我监测分析和报告技术 自我监测分析和报告技术 (SMART) 监测所有物理磁盘组件的内部性能,以检测指示可能导致物理磁盘故障的错 误。SMART 使用此信息报告故障是否即将出现,以便在故障发生前更换物理磁盘。存储阵列将监测附加的所 有驱动器,并在物理磁盘报告预测的故障时发出通知。 虚拟磁盘和磁盘组 配置存储阵列时,必须执行以下操作: • 将物理磁盘组织为磁盘组。 • 在这些磁盘组中创建虚拟磁盘。 • 提供主机服务器访问权限。 • 创建映射以将虚拟磁盘与主机服务器相关联。 注: 在映射虚拟磁盘之前,必须创建主机服务器访问权限。 磁盘组始终在存储阵列的未配置容量中创建。未配置容量是存储阵列中尚未分配的可用物理磁盘空间。 虚拟磁盘
磁盘池 通过磁盘池,您可以在一组物理磁盘间随机分发来自各个虚拟磁盘的数据。虽然对构成磁盘池的物理磁盘没有 最大数量限制,但每个磁盘池必须至少包含 11 个物理磁盘。此外,磁盘池所包含的物理磁盘数量不能超过各 存储阵列的最高限值。 精简虚拟磁盘 可以从现有磁盘池创建精简虚拟磁盘。通过创建精简虚拟磁盘可以设置大型虚拟空间,但仅在您需要时使用实 际物理空间。 RAID 级别 RAID 级别能够决定数据写入物理磁盘的方式。不同 RAID 级别能够提供不同级别的访问权限、冗余和容量。 与使用单个物理磁盘相比,使用多个物理磁盘有以下优势: • 将数据置于多个物理磁盘上(拆分)可让输入/输出 (I/O) 操作同时发生,因而能够提高性能。 • 如果发生错误,使用镜像或奇偶校验在多个物理磁盘上存储冗余数据可为重建丢失的数据提供支持, 即使错误由物理磁盘故障引起也是如此。 每个 RAID 级别提供不同性能和保护。必须根据应用程序类型、访问权限、容错能力和存储的数据来选择 RAID 级别。 存储阵列支持 RAID 级别 0、1、5、6 和 10。磁盘组中可使用的最多和最少物理磁盘数量取决于 RAID 级别: • 对于
RAID 1 RAID 1 使用磁盘镜像,因此写入一个物理磁盘的数据会同时写入另一个物理磁盘。RAID 1 提供快速的性能和最 佳的数据可用性,但磁盘开销也是最高的。建议对小数据库或不需要大容量的其他应用程序使用 RAID 1。例 如,会计、工资单或财务应用程序。RAID 1 提供完整的数据冗余。 RAID 5 RAID 5 在所有物理磁盘上使用奇偶校验和数据分段(分布式奇偶校验),以提供高数据吞吐量和数据冗余,尤 其适用于小规模随机访问。RAID 5 是一个万能的 RAID 级别,适用于多用户环境,其中 I/O 大小一般很小,读取 活动的比例很高,例如文件、应用程序、数据库、Web、电子邮件、新闻和 Intranet 服务器。 RAID 6 RAID 6 类似于 RAID 5,但提供附加的奇偶校验磁盘以实现更好的冗余。RAID 6 是最通用的 RAID 级别,适合于 I/O 大小一般很小而且读取活动比例很高的多用户环境。磁盘组中使用大容量物理磁盘或使用大量物理磁盘 时,建议使用 RAID 6。 RAID 10 小心: 即使在存储阵列上激活了高级功能,也不要尝试在 RAID 10 配置中创建超过 120
Storage Manager 控制。要更改后台初始化速率,必须停止任何现有的后台初始化。后台初始化自动重 新启动时,将实施更改后的速率。 • 前台初始化 - 当创建虚拟磁盘以建立奇偶校验时,存储阵列将执行后台初始化,同时允许主机服务器拥 有对虚拟磁盘的完整访问权限。后台初始化不在 RAID 0 虚拟磁盘上运行。后台初始化速率由 MD Storage Manager 控制。要更改后台初始化速率,必须停止任何现有的后台初始化。后台初始化自动重 新启动时,将实施更改后的速率。 一致性检查 一致性检查能够验证冗余阵列(RAID 级别 1、5、6 和 10)中数据的正确性。例如,在设有奇偶校验的系统 中,检查一致性包含计算物理磁盘上的数据,然后将结果与奇偶校验物理磁盘的内容进行比较。 一致性检查与后台初始化相似。不同之处是后台初始化无法手动启动或停止,而一致性检查可以。 注: 建议在冗余阵列上每月至少运行一次数据一致性检查。这样可以检测和自动替换不可读扇区。在重建 故障物理磁盘的过程中找到不可读扇区是严重问题,因为此时系统没有冗余来恢复数据。 介质验证 存储阵列执行的另一项后台任务是,对磁盘组中配置的所有物理磁
磁盘组操作 RAID 级别迁移 可以根据需要从一个 RAID 级别迁移到另一个级别。例如,通过转换为 RAID 5 集,可以向条带集 (RAID 0) 添加 容错特征。MD Storage Manager 提供关于 RAID 属性的信息,可帮助选择合适的 RAID 级别。系统运行时即可执 行 RAID 级别迁移,而无需重新引导,从而维护了数据可用性。 分段大小迁移 分段大小是指存储阵列在向下一个物理磁盘上写入数据之前在虚拟磁盘的物理磁盘上写入的数据总量(以 KB 为单位)。分段大小的有效值为 8 KB、16 KB、32 KB、 64 KB、128 KB 和 256 KB。 采用动态分段大小迁移可以更改给定虚拟磁盘的分段大小。创建虚拟磁盘时将根据 RAID 级别和预期用法等因 素设置默认分段大小。如果分段大小的用途与需要不匹配,您可以更改默认值。 考虑更改分段大小时,有两种情况说明了应对限制的不同方法: • • 如果 I/O 活动延伸至分段大小之外,可以增加分段大小来减少单个 I/O 所需的磁盘数量。通过为单个请 求使用单个物理磁盘,可释放磁盘来为其他请求服务,有多个用户访问数据库或存储环境时尤为如 此。
如果冗余 RAID 控制器模块在进行现有磁盘组进程时发生故障,则故障控制器上的进程会转移至对等控制器。 如果对等控制器上已存在一个活动的磁盘组进程,则会将转移的进程置于暂挂状态。当对等控制器上的活动进 程完成或停止之后,会恢复暂挂的进程。 注: 如果尝试在没有活动进程的控制器上启动磁盘组进程,而且磁盘组中的第一个虚拟磁盘由另一控制器 拥有且该控制器上存在活动的进程,则启动尝试会失败。 RAID 后台操作优先级 存储阵列支持对以下 RAID 操作采取常用的可配置优先级: • • • • • • • • 后台初始化 重建 回写 虚拟磁盘容量扩展 RAID 级别迁移 分段大小迁移 磁盘组扩展 磁盘组碎片整理 这些操作中每个操作的优先级都可更改,以满足要执行操作的环境的性能要求。 注: 设置高优先级会影响存储阵列性能。不建议将优先级设置为最高级别。此外,还应当依据对于主机服 务器访问的影响和完成操作的时间来评估优先级。例如,重建降级的虚拟磁盘的时间越长,次要磁盘出 现故障的风险就越大。 虚拟磁盘迁移和磁盘漫游 虚拟磁盘迁移是通过分离物理磁盘并将其重新附加至新的阵列,将虚拟磁盘或热备用从一个阵列移至另一个阵 列
• 虚拟磁盘热迁移 - 在迁移磁盘时开启目标存储阵列的电源。 • 虚拟磁盘冷迁移 - 在迁移磁盘时关闭目标存储阵列的电源。 注: 当目标存储阵列已有物理磁盘时,为了确保正确识别正在迁移的磁盘组和物理磁盘,可使用虚拟磁盘 热迁移。 在尝试迁移虚拟磁盘时,请遵照以下建议: • • 将物理磁盘移动至用于迁移的目标阵列 - 在虚拟磁盘热迁移期间将驱动器插入目标存储阵列时,请先等 待插入的物理磁盘显示在 MD Storage Manager 中或等待 30 秒(以先发生者为准),然后再插入下一个 物理磁盘。 警告: 如果驱动器插入之间没有时间间隔,则存储阵列可能会变得不稳定,并且可能暂时无法管 理。 将虚拟磁盘从多个存储阵列迁移到单个存储阵列 - 将虚拟磁盘从多个不同的存储阵列迁移到单个目标存 储阵列时,会将同一存储阵列中的所有物理磁盘作为一组移动到新的目标存储阵列中。确保一个存储 阵列中的所有物理磁盘均迁移到目标存储阵列后,再从下一个存储阵列开始迁移。 注: 如果未将驱动器模块作为一个组移动至目标存储阵列,则可能无法访问重新放置的新磁盘组。 • 将虚拟磁盘迁移到不具有物理磁盘的存储阵列 - 将磁盘组或
• 注: 此主机组是可在 MD Storage Manager 中创建的逻辑实体。主机组中的所有主机服务器均必须运 行同样的操作系统。 主机类型 - 主机服务器上运行的操作系统。 高级功能 RAID 机柜支持多项高级功能: • 虚拟磁盘快照。 • 虚拟磁盘复制。 • 远程复制(基于标准和传统)。有关更多信息,请参阅高级功能 - 远程复制和高级功能 - 远程复制(传 统)。 注: 上面列出的高级功能必须单独激活。如果购买了这些功能,则会获得一张激活卡,上面包含启用此功 能的说明。 支持的快照功能类型 MD 存储阵列支持以下类型的虚拟磁盘快照高级功能: • 使用多个时间点 (PiT) 组的快照虚拟磁盘 - 此功能也支持快照组、快照映像和一致性组。 • 为每个快照使用单独存储库的快照虚拟磁盘(传统) 有关更多信息,请参阅高级功能 - 快照虚拟磁盘和高级功能 - 快照虚拟磁盘(传统)。 快照虚拟磁盘、快照映像和快照组 快照映像是在特定时间点创建的关联基本虚拟磁盘内容的逻辑映像。主机无法直接读取或写入此类映像,因为 快照映像仅用于保存来自基本虚拟磁盘的数据。要允许主机访问快照映像中的数据的副
快照(传统)存储库虚拟磁盘 创建快照虚拟磁盘时,将自动创建快照存储库虚拟磁盘。快照存储库是在存储阵列中创建并作为快照虚拟磁盘 资源的虚拟磁盘。快照存储库虚拟磁盘包含快照虚拟磁盘元数据和特定快照虚拟磁盘的写时复制数据。存储库 仅支持一个快照。 不能选择快照存储库虚拟磁盘作为虚拟磁盘复制中的源虚拟磁盘或目标虚拟磁盘。如果选择快照源虚拟磁盘作 为虚拟磁盘复制的目标虚拟磁盘,则必须禁用与源虚拟磁盘相关联的所有快照虚拟磁盘。 小心: 在 Windows 群集配置中使用快照虚拟磁盘高级功能之前,必须将快照虚拟磁盘映射至拥有源虚拟磁 盘的群集节点。此操作可确保群集节点正确识别快照虚拟磁盘。 在快照启用进程完成之前将快照虚拟磁盘映射至没有源虚拟磁盘的节点,可能会导致操作系统错误识别快照虚 拟磁盘。而且还可能导致数据丢失或无法访问快照。 虚拟磁盘复制 虚拟磁盘复制是一项高级功能,可用于: • 备份数据。 • 将数据从使用较小容量物理磁盘的磁盘组复制到使用较大容量物理磁盘的磁盘组。 • 将快照虚拟磁盘还原至源虚拟磁盘。 虚拟磁盘复制将生成存储阵列中从源虚拟磁盘到目标虚拟磁盘的完整数据备份。 • 源虚拟磁盘 - 创
可以选择快照虚拟磁盘作为虚拟磁盘复制的源虚拟磁盘。此配置是应用快照虚拟磁盘功能的最佳方式之一,因 为这能实现完整备份并且不会对存储阵列 I/O 产生任何影响。 不能将快照存储库虚拟磁盘用作虚拟磁盘复制中的源虚拟磁盘或目标虚拟磁盘。如果选择源虚拟磁盘作为虚拟 磁盘复制的目标虚拟磁盘,则必须禁用与源虚拟磁盘相关联的所有快照虚拟磁盘。 多路径软件 多路径软件(又称为故障转移驱动程序)是位于主机服务器上的软件,可用于管理主机服务器与存储阵列之间 的冗余数据路径。为使多路径软件正确管理冗余路径,配置必须具备冗余 iSCSI 连接和布线。 该多路径软件能够识别到虚拟磁盘的多条路径并确立到该磁盘的首选路径。如果首先路径中的任何组件出现故 障,多路径软件会自动将 I/O 请求重新路由到备用路径,以使存储阵列继续运行,而不发生中断。 注: 多路径软件位于 MD Series 存储阵列资源 DVD 上。 首选和备用控制器及路径 首选控制器是被指定为虚拟磁盘或磁盘组所有者的 RAID 控制器模块。创建虚拟磁盘时,MD Storage Manager 将自动选择首选控制器。虚拟磁盘创建后,可更改虚拟磁盘的首选 RAID 控制器模
• • 带子集的最少队列深度 - 带子集的最少队列深度策略也称为最少 I/O 或最少请求策略。此策略将下一个 I/O 请求路由至具有最少待决 I/O 请求排队的数据路径。对于此策略来说,I/O 请求仅仅是队列中的一个 命令。此策略不考虑命令的类型或与命令相关联的数据块数。“带子集的最少队列深度”策略平等对 待大数据块请求和小数据库请求。所选数据路径是拥有相关虚拟磁盘的 RAID 控制器模块的路径组中的 路径之一。 带子集的最少路径权重(仅适用于 Windows 操作系统) - 带子集的最少队列深度策略也称为最少 I/O 或 最少请求策略。此策略将下一个 I/O 请求路由至具有最少待决 I/O 请求排队的数据路径。对于此策略来 说,I/O 请求仅仅是队列中的一个命令。此策略不考虑命令的类型或与命令相关联的数据块数。带子集 的最少队列深度策略平等对待大数据块请求和小数据库请求。所选数据路径是拥有相关虚拟磁盘的 RAID 控制器模块的路径组中的路径之一。 监测系统性能 可使用性能监测器选择虚拟磁盘和 RAID 控制器模块来监测或更改轮询间隔。 使用性能监测器时,请记住以下原则: • 如果在窗口打开时更改配置
8. 要保存当前显示的性能统计数据,请执行以下操作: a) 在性能监测器窗口中单击另存为。 b) 选择要将文件保存到的目录。 c) 在文件名中键入文件名。 d) 从文件类型列表中选择文件类型。 注: 默认扩展名为 .perf。 e) 单击保存以保存文件。 使用图形视图监测性能 要使用图形视图监测阵列性能,请执行以下操作: 1. 在 AMW 中,选择监测 → 运行状况 → 监测性能 → 图形视图。 2. 此时将显示性能监测器图形视图窗口。 根据您查看性能数据所需的方式,执行以下操作之一: – 查看历史数据 – 选择开始以启动监测会话。在查看图形下选择历史数据,然后单击定义。 注: 选择此选项时,定义图形窗口上的日期和时间字段将激活。 – 查看实时数据 – 选择实时数据,然后单击定义。 3. 此时将显示图形性能监测器窗口。 在时间间隔区域中,设置时间范围以确定要以图形格式显示的历史数据量。执行以下操作之一: – 要使用历史记录缓冲区中的第一个和最后一个数据点作为起始时间和结束时间 – 选择默认值。 – 要指定起始和结束的日期与时间,请执行以下操作: 1. 选择自定义。 2.
– 虚拟磁盘 – 磁盘组 7. – 存储阵列总数 单击添加可将所选度量/设备对移动到所选表格显示区域。 8. 对于历史数据,最多可选择四个设备和一个度量以在每个图形中查看。对于实时数据,只能选择一个度量 和一个设备以在每个图形中查看。 选择报告依据的度量/设备对后,单击查看图形。 9. 此时将显示查看图形窗口。 在查看图形窗口中,查看针对所选度量/设备对显示的性能数据。 10. 如果定义两个以上图形,并且要查看不同图形,请执行以下操作: a) 单击关闭。 b) 在所选表格中,选择不同图形,然后单击查看图形。 11.
查找和管理存储阵列 3 可以使用以下两种方法管理存储阵列: • 带外管理 • 带内管理 注: 如果您正在使用 iSCSI MD 存储阵列,请参阅 dell.
除非删除整个虚拟磁盘、虚拟磁盘组或虚拟磁盘对,否则无法移除。访问虚拟磁盘不可用于应用程序数据存 储;除非删除整个虚拟磁盘、虚拟磁盘组或虚拟磁盘对,否则无法移除访问虚拟磁盘。默认 LUN 为 31。 存储阵列 必须先将存储阵列添加到 MD Storage Manager,才能设置存储阵列以实现优化使用。 注: 只能在 EMW 中添加存储阵列。 可执行以下操作: • 自动查找存储阵列。 • 手动添加存储阵列。 注: 使用“自动”选项添加新存储阵列之前,请验证主机或管理站网络配置(包括站 IP 地址、子网掩码和 默认网关)是否正确。 注: 对于 Linux,请设置默认网关,以便将广播数据包发送至 255.255.255.
– 在 AMW 中,选择设置选项卡,然后选择重命名存储阵列。 – 在 EMW 中,右键单击与阵列对应的图标,然后选择重命名。 设置存储阵列 AMW 中的设置选项卡上显示了初始设置任务列表。使用初始设置任务区域中列出的任务,可确保完成基本设 置步骤。 初次设置存储阵列时,请使用初始设置任务列表执行以下任务: • 定位存储阵列 - 通过打开系统标识指示灯,找到存储阵列在网络中的物理位置。 • 指定存储阵列的新名称 - 使用唯一名称来标识每个存储阵列。 • 设置存储阵列密码 - 为存储阵列配置密码以防止未经授权的访问。尝试更改存储阵列配置(例如创建或 删除虚拟磁盘)时,MD Storage Manager 将提示输入密码。 • 配置 iSCSI 主机端口 - 自动配置每个 iSCSI 主机端口的网络参数或指定每个 iSCSI 主机端口的配置信息。 • 配置存储阵列 - 使用自动配置方法或手动配置方法创建磁盘组、虚拟磁盘和热备用物理磁盘。有关更多 信息,请参阅联机帮助主题。 • 映射虚拟磁盘 - 将虚拟磁盘映射到主机或主机组。 • 保存配置 - 将配置参数保存到一个文件中,以便使用该文件还
• 名称可以包含字母、数字和特殊字符下划线 (_)、破折号 (–) 和井号 (#)。不允许使用任何其他特殊字 符。 要重命名所选存储阵列,请执行以下操作: 1. 请执行以下操作之一: – 在 AMW 中,选择设置 → 重命名存储阵列。 – 在 EMW 中,选择设备选项卡树形视图,然后选择编辑 → 重命名 。 – 在 EMW 的设备选项卡树形视图中,右键单击所需的阵列图标,然后选择重命名。 此时将显示重命名存储阵列对话框。 2. 键入存储阵列的新名称。 注: 请避免使用随意的名称或将来可能失去意义的名称。 3. 单击确定。 此时将显示一条消息,警告您关于更改存储阵列名称的影响。 4. 单击是。 新的存储阵列名称随将显示在 EMW 中。 5.
注: 只能尝试输入密码 10 次,之后存储阵列将进入锁定状态。再次尝试输入密码之前,必须等待 10 分钟使存储阵列重设才能再次输入密码。要重设密码,请按下 RAID 控制器模块上的密码重设开 关。 为现有存储阵列添加或编辑注释 含有相应存储阵列名称的描述性注释是一种有用的识别工具。只能在 EMW 中为存储阵列添加或编辑注释。 要添加或编辑注释,请执行以下操作: 1. 在 EMW 中,选择设备选项卡,然后选择相关的托管存储阵列。 2. 选择编辑 → 注释。 此时将显示编辑注释对话框。 3. 键入注释。 注: 注释中的字符数不得超过 60 个字符。 4. 单击确定。 此选项将更新表视图中的注释并将其保存在本地存储管理站文件系统中。使用其他存储管理站的管理员将 看不到该注释。 移除存储阵列 如果不再需要从特定存储管理工作站管理某个存储阵列,可以从托管阵列的列表中将其移除。移除存储阵列不 会对存储阵列或其数据产生任何影响。移除存储阵列只会将其从 EMW 设备选项卡中显示的存储阵列的列表中 移除。 要移除存储阵列,请执行以下操作: 1.
显示故障转移警报 可以更改存储阵列的故障转移警报延迟。如果多路径驱动程序将虚拟磁盘转移到非首选控制器,使用故障转移 警报延迟可延迟记录严重事件。如果多路径驱动程序在指定的延迟期间内将虚拟磁盘再转移到首选控制器,则 不会记录严重事件。如果转移时间超过此延迟期间,关于虚拟磁盘不在首选路径上的警报将作为严重事件发 布。当一个以上的虚拟磁盘因为系统错误(例如主机适配器发生故障)而故障转移时,使用此选项还可以将多 个警报减至最少。有关更多信息,请参阅联机帮助主题。 要配置故障转移警报延迟,请执行以下操作: 1. 在 AMW 中的菜单栏上,选择存储阵列 → 更改 → 故障转移警报延迟。 此时将显示故障转移警报延迟窗口。 2. 在故障转移警报延迟中,输入 0 和 60 分钟之间的值。 3. 单击确定。 4. 如果已为所选的存储阵列设置密码,将显示输入密码对话框。键入存储阵列的当前密码。 更改存储阵列上的高速缓存设置 要更改存储阵列高速缓存设置,请执行以下操作: 1. 在 AMW 中,选择存储阵列 → 更改 → 高速缓存设置 。 此时将显示更改高速缓存设置窗口。 2.
1. 在 AMW 的菜单栏中,选择硬件 → 机柜 → 更改 → 硬件查看顺序。 2. 从机柜列表中选择要移动的机柜,然后单击向上或向下将机柜移动到新位置。 3. 单击确定。 4. 如果已为所选的存储阵列设置密码,将显示输入密码对话框。键入存储阵列的当前密码。 5. 单击确定。 配置警报通知 MD Storage Manager 可针对存储阵列上需要注意的任何情况发送警报。警报可以通过电子邮件消息或简单网络 管理协议 (SNMP) 陷阱消息的形式发送。可以为所有存储阵列或单个存储阵列配置警报通知。 要配置警报通知,请执行以下操作: 1. 对于所有存储阵列,请在 EMW 中: a) b) c) d) 2. 选择设置选项卡。 选择配置警报。 选择所有存储阵列。 单击确定。 此时将显示配置警报对话框。 对于单个存储阵列: a) 选择设备选项卡。 b) 选择相关的存储阵列,然后选择编辑 → 配置警报 。 3. 此时将显示配置警报对话框。 配置电子邮件或 SNMP 警报。 有关更多信息,请参阅配置电子邮件警报或配置 SNMP 警报。 配置电子邮件警报 1.
4. c) (可选)要在电子邮件警报中包括发件人的联系信息,请选择在警报中包含联系信息,然后键入联系 信息。 选择电子邮件选项卡,配置电子邮件目标: – 添加电子邮件地址 - 在电子邮件地址中,键入电子邮件地址并单击添加。 – 替换电子邮件地址 - 在已配置的电子邮件地址区域中,选择要替换的电子邮件地址,接着在电子邮 件地址中键入替换的电子邮件地址,然后单击替换。 – 删除电子邮件地址 - 在已配置的电子邮件地址区域中,选择电子邮件,然后单击删除。 – 验证电子邮件地址 - 在电子邮件地址中键入电子邮件地址或在已配置的电子邮件地址区域中选择电 子邮件地址,然后单击测试。测试电子邮件会发送至所选的电子邮件地址。屏幕将显示带有测试 和任何错误结果的对话框。 新添加的电子邮件地址将显示在已配置的电子邮件地址区域。 5. 对于已配置的电子邮件地址区域中所选的电子邮件地址,在要发送的信息列表中选择: – 仅事件 - 电子邮件警报仅包含事件信息。默认情况下,选择仅事件。 – 事件 + 配置文件 - 电子邮件警报包含事件信息和存储阵列配置文件。 6.
3. 选择 SNMP 选项卡以配置 SNMP 警报目标。 – 添加 SNMP 地址 - 在团体名称中键入团体名称。在陷阱目标中键入陷阱目标,然后单击添加。 注: 团体名称是一个 ASCII 字符串,用于标识一组已知的网络管理工作站并由网络管理员设 置。默认团体名称是字符串 public。陷阱目标是运行 SNMP 管理应用程序的计算机的 IP 地 址或主机名。例如,Dell Management Console 即为启用了 SNMP 的管理应用程序。有关 Dell Management Console 的更多信息,请访问 dell.com。 – 替换 SNMP 地址 - 在已配置的 SNMP 地址区域中选择 SNMP 地址,然后在团体名称中键入替换团 体名称并在陷阱目标中键入陷阱目标,随后单击替换。 – 删除 SNMP 地址 - 在已配置的 SNMP 地址区域中选择 SNMP 地址,然后单击删除。 4.
– 替换前的等待天数 有关更多信息,请参阅联机帮助主题。 设置存储阵列 RAID 控制器模块时钟 您可以使用同步时钟选项来同步存储阵列 RAID 控制器模块时钟与存储管理站。此选项可确保 RAID 控制器模块 写入到事件日志的事件时间戳与写入到主机日志文件的事件时间戳相匹配。RAID 控制器模块在同步期间仍然 可用。 要同步 RAID 控制器模块时钟与存储管理站,请执行以下操作: 1. 在 AMW 中的菜单栏上,选择硬件 → RAID 控制器模块 → 同步时钟。 2.
使用 iSCSI 4 注: 以下几节仅与使用 iSCSI 协议的 MDxx0i 存储阵列有关。 更改 iSCSI 目标验证 要更改 iSCSI 目标验证,请执行以下操作: 1. 在 AMW 中,选择设置选项卡。 2. 选择管理 iSCSI 设置。 3. 要更改验证设置,可选择以下选项之一: 此时将显示管理 iSCSI 设置窗口,并默认选择目标验证选项卡。 – 无 - 不进行启动器验证。选择无后,任何启动器均可访问目标。 4. – CHAP - 使启动器尝试使用质询握手验证协议 (CHAP) 验证目标。请仅在需要使用相互 CHAP 验证时 定义 CHAP 机密。如果选择 CHAP,但未定义 CHAP 目标机密,将显示错误消息。请参阅创建 CHAP 机密。 要输入 CHAP 机密,请单击 CHAP。 此时将显示输入目标 CHAP 机密对话框。 5. 输入目标 CHAP 机密。 目标 CHAP 机密必须最少包含 12 个字符,最多包含 57 个字符。 6.
7.
4. 在 iSCSI 别名中键入别名。 5. 单击确定。 注: 别名最多可包含 30 个字符。别名可以包括字母、数字和特殊字符(下划线 (_)、减号 (-) 和井号 (#))。不允许使用其他特殊字符。 注: Open iSCSI(由 Red Hat Enterprise Linux 5 和带 SP 1 的 SUSE Linux Enterprise Server 10 使用)不支持 使用目标别名。 更改 iSCSI 目标查找设置 要更改 iSCSI 目标查找设置,请执行以下操作: 1. 在 AMW 中,选择设置选项卡。 2. 选择管理 iSCSI 设置。 此时将显示管理 iSCSI 设置窗口。 3. 选择目标查找选项卡。 4. 选择使用 iSNS 以激活 iSCSI 目标查找。 5.
同一控制器上的所有主机端口均以相同速度运行。如果为同一控制器上的主机端口选择不同的速度,则会 显示错误。 5. 要为 iSCSI 主机端口使用 IPv4 设置,可选择启用 IPv4,然后选择 IPv4 设置选项卡。 6. 要为 iSCSI 主机端口使用 IPv6 设置,可选择启用 IPv6,然后选择 IPv6 设置选项卡。 7. 要配置 IPv4 和 IPv6 设置,请执行以下操作: – 要自动配置此设置,可选择从 DHCP 服务器自动获取配置。默认情况下会选择此选项。 – 要手动配置此设置,可选择指定配置。 注: 如果选择自动配置方法,则 IPv4 设置将使用 DHCP 自动获取配置。IPv6 设置与此类似,它将根据 MAC 地址和子网中的 IPv6 路由器自动获取配置。 8. 单击高级 IPv4 设置和高级 IPv6 设置可配置虚拟局域网 (VLAN) 支持和以太网优先级。 9. 单击高级端口设置可配置 TCP 侦听端口设置和巨型帧设置。 10.
查看或结束 iSCSI 会话 您可能会因以下原因而要结束 iSCSI 会话: • 未经授权的访问 - 如果发现没有访问权限的启动器登录,则可结束此 iSCSI 会话。结束 iSCSI 会话时会 强制启动器从存储阵列注销。如果使用无验证方法,则启动器可以登录。 • 系统停机 - 如果需要关闭存储阵列且启动器已登录,则可从存储阵列结束 iSCSI 会话以注销此启动器。 要查看或结束 iSCSI 会话,请执行以下操作: 1. 在 AMW 菜单栏中,选择存储阵列 → iSCSI → 结束会话 。 2. 在当前会话区域中选择要查看的 iSCSI 会话。 3.
注: 您必须先设置基线才能比较基线统计信息。 编辑、移除或重命名主机拓扑 如果向错误的主机或主机组授予了访问权限,可以移除或编辑主机拓扑。请按照下表中给出的相应程序纠正主 机拓扑。 表. 2: 主机拓扑操作 所需操作 完成操作的步骤 移动主机 移动主机组 1. 单击主机映射选项卡。 2. 选择要移动的主机,然后选择主机映射 → 移动 。 3. 选择要将主机移动到其中的主机组,然后单击确定。 手动删除主机和主机组 1. 单击主机映射选项卡。 2. 选择要移除的项目,然后选择主机映射 → 移除 。 重命名主机或主机组 1. 单击主机映射选项卡。 2. 选择要移除的项目,然后选择主机映射 → 重命名 。 3.
事件监测器 5 事件监测器随 Dell PowerVault Modular Disk Storage Manager (MD Storage Manager) 提供。事件监测器始终在后 台运行,监测托管存储阵列上的活动。如果事件监测器检测到任何严重问题,能够通过电子邮件和/或简单网 络管理协议 (SNMP) 陷阱消息通知主机或远程系统。 要获得最及时、连续的事件通知,请在 24 小时全天候运行的管理站上启用事件监测器。在多个系统上启用事 件监测器或同时让事件监测器和 MD Storage Manager 处于活动状态可能会造成重复事件,但这并不表示阵列 上出现多重故障。 事件监测器是独立于企业管理窗口 (EMW) 运行的后台任务。 要使用事件监测器,请执行以下操作之一: • 为想要监测的托管设备设置警报目标。可能的警报目标为 Dell Management Console。有关 Dell Management Console 的更多信息,请参阅 dell.com。 • 通过将 emwdata.
关于主机 6 配置主机访问权限 Dell PowerVault Modular Disk Storage Manager (MD Storage Manager) 由多个模块组成,其中一个模块为 Host Context Agent,该模块属于 MD Storage Manager 安装的一部分,始终在后台运行。 如果 Host Context Agent 在主机上运行,那么 MD Storage Manager 将自动检测该主机和将 Host Context Agent 与 存储阵列连接的主机端口。主机端口将显示在阵列管理窗口 (AMW) 的主机映射选项卡中。主机必须手动添加 在主机映射选项卡的默认主机组中。 注: 在使用 iSCSI 协议的 MD3260i 和 MD3660i 存储阵列中,Host Context Agent 不是动态的,必须在创建 iSCSI 会话之后重新启动,才能自动对它们进行检测。 请使用“定义主机向导”来定义在存储阵列中访问虚拟磁盘的主机。定义主机是让存储阵列知道哪些主机与其 相连、授予虚拟磁盘访问权限的所需步骤之一。有关定义主机的更多信息,请参阅定义主机。 要启用主机向存储阵
定义主机 您可以使用 AMW 中的“定义主机向导”为存储阵列定义主机。可以添加已知的非关联主机端口标识符或新的 主机端口标识符。 添加主机端口标识符之前,必须先指定用户标签(输入用户标签之前将禁用添加按钮)。 要定义主机,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡。 2. 执行以下操作之一: – 从菜单栏中选择主机映射 → 定义 → 主机 。 – 选择设置选项卡,然后单击手动定义主机。 – 选择主机映射选项卡。在要添加主机的对象树中右键单击根节点(存储阵列名称)、默认组节点 或主机组节点,然后从弹出菜单中选择定义 → 主机。 此时将显示指定主机名窗口。 3. 4. 在主机名中,输入不超过 30 个字符的字母数字名称。 选择是否打算使用此存储阵列中的存储分区?中的相关选项,然后单击下一步。 此时将显示指定主机端口标识符窗口。 5.
移除主机访问权限 要移除主机访问权限,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡。 2. 从左窗格的对象树中选择主机节点。 3. 请执行以下操作之一: – 从菜单栏中选择主机映射 → 主机 → 移除。 – 右键单击主机节点,然后从弹出菜单中选择移除。 此时将显示移除确认对话框。 4. 键入 yes。 5. 单击确定。 管理主机组 主机组是由两个或多个主机组成的逻辑实体,这些主机可以共享对存储阵列上特定虚拟磁盘的访问权限。您可 以使用 MD Storage Manager 创建主机组。 主机组中的所有主机均必须具有相同的主机类型(操作系统)。此外,主机组中的所有主机均必须具有特定软 件(例如群集软件)才能管理虚拟磁盘共享和访问。 如果主机是群集的一部分,则群集中每个主机均必须连接至存储阵列,且群集中的每个主机均必须添加至主机 组。 创建主机组 要创建主机组,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡。 2. 在对象树中,选择存储阵列或默认组。 3.
从主机组移除主机 可以从 AMW 主机映射选项卡上的对象树中移除主机。有关更多信息,请参阅移除主机组。 将主机移至不同主机组 要将主机移至不同主机组,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡,然后在对象树中选择主机节点。 2. 请执行以下操作之一: – 从菜单栏中,选择主机映射 → 主机 → 移动。 – 右键单击主机节点,然后从弹出式菜单中选择移动。 3. 此时将显示移动主机对话框。 在选择主机组列表中,选择要将主机移入其中的主机组。 您还可以将主机移出主机组并将其添加到默认组下。 4. 此时将显示移动主机确认对话框。 单击是。 主机将移至所选主机组,其映射情况如下: – 主机保留为其分配的特定虚拟磁盘映射。 – 主机继承分配给要移入其中的主机组的虚拟磁盘映射。 – 主机丢失分配给从其中移出的主机组的虚拟磁盘映射。 移除主机组 要移除主机组,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡,然后在对象树中选择主机组节点。 2. 请执行以下操作之一: – 在菜单栏中,选择主机映射 → 主机组 → 移除。 – 右键单击主机组节点,从弹出式菜单中选择移除。 3.
• 更改主机类型 MD Storage Manager 将自动检测对任何运行主机代理软件的主机进行的更改。 启动或停止 Host Context Agent Host Context Agent 可以查找主机拓扑。Host Context Agent 随主机启动和停止。要查看 Host Context Agent 找到的 拓扑,可在 MD Storage Manager 中的配置选项卡中单击配置主机访问权限(自动)。 出现以下情况时,必须停止并重新启动 Host Context Agent 才能查看对主机拓扑所做的更改: • 新的存储阵列附加至主机服务器。 • 接通 RAID 控制器模块电源时添加主机。 要在 Linux 上启动或停止 Host Context Agent,请在提示符下输入以下命令: SMagent start SMagent stop 出现以下情况后,必须停止并重新启动 SMagent: • 使控制器脱机或更换控制器。 • 从 Linux 主机服务器移除主机至阵列的连接或将这些连接附加至 Linux 主机服务器。 要在 Windows 上启动或停止 Host Conte
管理主机端口标识符 您可以通过执行以下操作来管理添加至存储阵列的主机端口标识符: • 添加 - 将新的主机端口标识符添加或关联到特定主机。 • 编辑 - 更改主机端口标识符别名或用户标签。将主机端口标识符移动(关联)到新主机。 • 替换 - 用另一个主机端口标识符替换特定主机端口标识符。 • 删除 - 移除特定主机端口标识符与关联主机之间的关联。 要管理主机端口标识符,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡。 2. 请执行以下操作之一: – 在对象树中右键单击主机,从弹出式菜单中选择管理主机端口标识符。 – 从菜单栏中,选择主机映射 → 管理主机端口标识符。 此时将显示管理主机端口标识符对话框。 3. 要管理显示与以下主机相关联的主机端口标识符列表中的主机端口标识符,请执行以下操作: – 对于特定主机,可从与存储阵列相关联的主机列表中选择主机。 – 对于所有主机,可从与存储阵列相关联的主机列表中选择所有主机。 4. 如果要添加新的主机端口标识符,请转到步骤 5。如果要管理现有的主机端口标识符,请转到步骤 10。 5.
磁盘组、标准虚拟磁盘和精简虚拟磁盘 7 创建磁盘组和虚拟磁盘 磁盘组在存储阵列的未配置容量中创建,而虚拟磁盘在磁盘组或磁盘池的可用容量中创建。每个磁盘组中支持 的最大物理磁盘数为 120(激活高级功能后为 192)。连接至存储阵列的主机在虚拟磁盘中读取并写入数据。 注: 要创建虚拟磁盘,必须先将物理磁盘组织为磁盘组并配置主机访问权限。然后才能在磁盘组中创建虚 拟磁盘。 要创建虚拟磁盘,请使用以下方法之一: • • 从未配置的容量中创建新磁盘组。先为磁盘组定义 RAID 级别和可用容量(可用存储空间),然后为新 磁盘组中的第一个虚拟磁盘定义参数。 在现有磁盘组或磁盘池的可用容量中创建新虚拟磁盘。只需指定新虚拟磁盘的参数。 每个磁盘组在创建时都会配置一定数量的可用容量。可以使用该可用容量将磁盘组细分为一个或多个虚拟磁 盘。 使用以下方法可创建磁盘组和虚拟磁盘: • 自动配置 - 提供最快速的方法,但配置选项有限 • 手动配置 - 提供更多配置选项 创建虚拟磁盘时,请考虑该虚拟磁盘的用途,并根据其用途选择相应容量。例如,如果磁盘组具有一个用于存 储多媒体文件(通常很大)的虚拟磁盘和另一个用于存储文本
– 要从存储阵列的未分配物理磁盘中创建磁盘组,请在存储和复制服务选项卡上选择一个或多个物 理磁盘类型相同的未分配物理磁盘,然后从菜单栏选择存储 → 磁盘组 → 创建 。 – 选择硬件选项卡,接着右键单击未分配的物理磁盘,然后从弹出菜单中选择创建磁盘组。 – 要创建安全磁盘组,请在硬件选项卡上选择一个或多个物理磁盘类型相同的未分配安全型物理磁 盘,然后从菜单栏中选择存储 → 磁盘组 → 创建。 此时将显示简介(创建磁盘组)窗口。 2. 3. 单击下一步。 此时将显示磁盘组名称和物理磁盘选择窗口。 在磁盘组名称中键入不超过 30 个字符的磁盘组名称。 4. 选择相应的物理磁盘选择选项,然后单击下一步。 您有以下两个选择: 5. – 自动。 – 手动。 如果选择自动配置,将显示 RAID 级别和容量窗口: a) 在选择 RAID 级别中选择相应的 RAID 级别,可选的 RAID 级别为 0、1/10、5 和 6。 根据所选 RAID 级别,选择容量表中将显示所选 RAID 级别可用的物理磁盘。 b) 在选择容量表中,选择相关的磁盘组容量,然后单击完成。 6.
• 创建一个或多个虚拟磁盘并分配映射后,必须在操作系统中注册虚拟磁盘。此外,必须确保主机能够 识别物理存储阵列名称与虚拟磁盘名称之间的映射。请根据操作系统运行基于主机的公用程序 hot_add 和 SMdevices。 • 如果存储阵列由具有不同介质类型或不同接口类型的物理磁盘组成,那么存储和复制服务选项卡的未 配置的总容量窗格中可能会显示多个未配置容量节点。如果扩展机柜中存在可用的未分配的物理磁 盘,则每个物理磁盘类型都会有相关的未配置容量节点。 • 您无法从不同的物理磁盘技术类型创建磁盘组和随后的虚拟磁盘。每个由磁盘组构成的物理磁盘均必 须属于同样的物理磁盘类型。 注: 创建虚拟磁盘之前,请确保已创建磁盘组。如果选择未配置容量节点或未分配的物理磁盘来创 建虚拟磁盘,则将显示需要磁盘组对话框。单击是并使用创建磁盘组向导来创建磁盘组。创建磁 盘组之后,将显示创建虚拟磁盘向导。 要创建标准虚拟磁盘,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡。 2.
更改虚拟磁盘修改优先级的原则: • • 如果选择多个虚拟磁盘,则修改优先级将默认设置为最低优先级。仅当选择单个虚拟磁盘时,才会显 示当前优先级。 使用此选项更改修改优先级可修改所选虚拟磁盘的优先级。 要更改虚拟磁盘修改优先级,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡。 2. 选择一个虚拟磁盘。 3. 在菜单栏中,选择存储 → 虚拟磁盘 → 更改 → 修改优先级。 此时将显示更改修改优先级窗口。 4. 选择一个或多个虚拟磁盘。将“选择修改优先级”滑块移动到所需的优先级。 注: 要选择不相邻的虚拟磁盘,请按 并单击以选择相应虚拟磁盘。要选择相邻的虚拟磁盘,请 按 并单击以选择相应虚拟磁盘。要选择所有可用的虚拟磁盘,请单击全选。 5. 单击“确定”。 此时将显示一条消息,提示您确认虚拟磁盘修改优先级的更改。 6. 单击是。 7.
小心: 可能丢失数据 - 选择“启用无电池写入高速缓存”选项可继续执行写入高速缓存操作(即使电 池已完全放电或未充满电)。通常,RAID 控制器模块会临时禁用写入高速缓存,直至电池充满电。 如果选择此选项,但没有通用电源提供保护,则可能会丢失数据。此外,如果在没有 RAID 控制器模 块电池的情况下选择了“启用无电池写入高速缓存”选项,也可能会丢失数据。 注: 启用可选的“RAID 控制器模块电池”选项后,将不显示“启用写入高速缓存”。“启用无电池写 入高速缓存”将仍然可用,但在默认情况下处于未选中状态。 注: 禁用“启用写入高速缓存”复选框后,高速缓存会自动刷新。 5. 单击确定。 此时将显示一条消息,提示您确认虚拟磁盘修改优先级的更改。 6. 单击是。 7.
更改 IO 类型 可以为定义为存储阵列配置组成部分的虚拟磁盘指定虚拟磁盘 I/O 特征。系统使用虚拟磁盘的预期 I/O 特征来 指示适用的默认虚拟磁盘分段大小和动态高速缓存预读取设置。有关自动配置向导的信息,请参阅联机帮助主 题。 注: 要在以后更改动态缓存预读取设置,可从菜单栏中选择存储 → 虚拟磁盘 → 更改 → 高速缓存设置。要 在以后更改分段大小,可从菜单栏中选择存储 → 虚拟磁盘 → 更改 → 分段大小。 以下所示 I/O 特征类型仅在创建虚拟磁盘过程中显示。 选择其中一个虚拟磁盘 I/O 特征后,将在动态高速缓存预读取字段和分段大小字段中填充通常最适于预期 I/O 模式的对应动态高速缓存预读取设置和分段大小。 要更改 I/O 类型,请执行以下操作: 1. 要启用读取高速缓存,请选择启用读取高速缓存。 2. 要启用动态高速缓存预读取,请选择启用动态高速缓存预读取。 3. 要启用写入高速缓存,请选择启用写入高速缓存。 4.
精简虚拟磁盘上的物理容量与虚拟容量 配置精简虚拟磁盘时,可以指定以下类型的容量: • 物理(或首选) • 虚拟 虚拟容量是指报告给主机的容量,而物理容量是指为数据写入操作分配的实际物理磁盘空间容量。通常,物理 容量比虚拟容量小得多。 精简配置允许创建具有较大的虚拟容量和相对较小的物理容量的虚拟磁盘。这对于存储利用率和效率非常有 益,因为它允许您根据应用程序需求的变化增加容量,而不必中断数据吞吐。还可以设置利用率警告阈值,当 达到指定的物理容量百分比时,让 MD Storage Manager 生成警报。 更改现有精简虚拟磁盘的容量 如果主机用于读/写操作的空间量(有时称为已消耗容量)超过为标准虚拟磁盘分配的容量,那么在增加物理 容量之前,存储阵列将无法满足更多写请求。但在精简虚拟磁盘上,MD Storage Manager 可以自动扩展精简虚 拟磁盘的物理容量。您也可以使用存储 → 虚拟磁盘 → 增加存储库容量来手动扩展容量。如果选择自动扩展选 项,还可以设置最大扩展容量。最大扩展容量使您可以将虚拟磁盘的自动增长限制在定义的虚拟容量以下。 注: 由于在创建精简虚拟磁盘时不分配全部的容量,因此在执行某
• 首选容量 - 设置虚拟磁盘的初始物理容量(MB、GB 或 TB)。磁盘池中的首选容量以 4 GB 增量进行分 配。如果您指定的容量数不是 4 GB 的倍数,MD Storage Manager 将分配 4 GB 倍数容量,并将其余容量 指定为未使用。如果存在不是 4 GB 倍数的空间,则可以使用该空间来增加精简虚拟磁盘的大小。要增 加精简虚拟磁盘的大小,请选择存储 → 虚拟磁盘 → 增加容量 。 • 存储库扩展策略 - 选择自动或手动以指定 MD Storage Manager 是否必须自动扩展物理容量阈值。如果 选择自动,请输入触发自动容量扩展的最大扩展容量值。MD Storage Manager 以 4 GB 增量扩展首选容 量,直至达到指定的容量。如果选择手动,则不会进行自动扩展,当达到警告阈值的百分比值时,会 显示警报。 警告阈值 - 当消耗的容量达到指定的百分比时,MD Storage Manager 会发送电子邮件或 SNMP 警报。 • 精简虚拟磁盘的状态 在 MD Storage Manager 中可显示以下虚拟磁盘状态: • 最佳 - 虚拟磁盘正常运行。 • 已满 - 精
精简虚拟磁盘回滚 精简虚拟磁盘完全支持回滚操作。回滚操作还原精简虚拟磁盘的逻辑内容以符合所选快照映像。执行回滚操作 后,精简虚拟磁盘的已消耗容量没有变化。 初始化精简虚拟磁盘 小心: 可能丢失数据 – 初始化精简虚拟磁盘会擦除虚拟磁盘中的全部数据。如果有疑问,请在执行此步骤 之前联系技术支持代表。 创建精简虚拟磁盘时,会自动进行初始化。但是,MD Storage Manger Recovery Guru 可能会建议手动初始化精 简虚拟磁盘,以从某些故障中恢复。如果选择重新初始化精简虚拟磁盘,有以下几个选项: • • • 保留相同的物理容量 - 如果保留相同的物理容量,虚拟磁盘可以保留当前的存储库虚拟磁盘,从而节省 初始化时间。 更改物理容量 - 如果更改物理容量,则会创建新的存储库虚拟磁盘,您可以选择更改存储库扩展策略和 警告阀值。 将存储库移至不同的磁盘池。 初始化精简虚拟磁盘会擦除虚拟磁盘中的全部数据。但是,主机映射、虚拟容量、存储库扩展策略和安全设置 得以保留。初始化也会清除块索引,可导致读取未写入的块,好像这些块被零值填充。初始化后,精简虚拟磁 盘完全清空。 无法初始化以下类型的虚拟磁盘: •
使用不同的物理容量初始化精简虚拟磁盘 小心: 初始化精简虚拟磁盘会擦除虚拟磁盘中的全部数据。 • 您只能从磁盘池而非磁盘组创建精简虚拟磁盘。 • 通过使用相同的物理容量初始化精简虚拟磁盘,原始存储库将保留,但精简虚拟磁盘的内容被删除。 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择您要初始化的精简虚拟磁盘。 精简虚拟磁盘在磁盘池节点下列出。 3. 选择存储 → 虚拟磁盘 → 高级 → 初始化。 此时将显示初始化精简虚拟磁盘窗口。 4. 选择使用不同的存储库。 5. 根据您是否希望保留当前的存储库以便将来使用,请选中或清除删除现有存储库,然后单击下一步。 6. 选择以下一项: – 是 - 如果您的存储阵列上有多个磁盘池 – 否 - 如果您的存储阵列上只有一个磁盘池 此时将显示选择磁盘池窗口。 7. 选择保留现有磁盘池,然后单击下一步。 此时将显示选择存储库窗口。 8.
初始化精简虚拟磁盘并将其移至不同的磁盘池 小心: 初始化精简虚拟磁盘会擦除虚拟磁盘中的全部数据。 注: 您只能从磁盘池而非磁盘组创建精简虚拟磁盘。 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择您要初始化的精简虚拟磁盘。 精简虚拟磁盘在磁盘池节点下列出。 3. 选择存储 → 虚拟磁盘 → 高级 → 初始化。 此时将显示初始化精简虚拟磁盘窗口。 4. 根据您是否希望保留当前的存储库以便将来使用,请选中或清除删除现有存储库,然后单击下一步。 5. 此时将显示选择磁盘池窗口。 选择选择新磁盘池单选按钮。 6. 从此表中选择新磁盘池,然后单击下一步。 此时将显示选择存储库窗口。 7. 选择保留现有磁盘池,然后单击下一步。 此时将显示选择存储库窗口。 8.
选择适当的物理磁盘类型 可以在存储阵列中创建磁盘组和虚拟磁盘。必须从存储阵列提供的未配置容量、可用容量或现有磁盘池中选择 要为虚拟磁盘分配的容量。然后为该虚拟磁盘定义基本参数和可选的高级参数。 随着各种物理磁盘技术的出现,现可在一个存储阵列中混用不同介质类型和不同接口类型的物理磁盘。 使用自加密磁盘确保物理磁盘安全 自加密磁盘 (SED) 技术可防止未经授权访问已从存储阵列中物理卸下的物理磁盘上的数据。存储阵列具有安全 密钥。自加密磁盘仅通过具有正确安全密钥的阵列提供数据访问。 自加密磁盘或安全型物理磁盘在写入期间加密数据并在读取期间解密数据。有关更多信息,请参阅联机帮助主 题。 可通过安全型物理磁盘创建安全磁盘组。通过安全型物理磁盘创建安全磁盘组时,该磁盘组中的物理磁盘将启 用安全保护。安全型物理磁盘启用安全保护后,该物理磁盘需要 RAID 控制器模块的正确安全密钥才能读取或 写入数据。存储阵列中的所有物理磁盘和 RAID 控制器模块共享同一安全密钥。共享的安全密钥提供对物理磁 盘的读取和写入访问权限,而每个物理磁盘上的物理磁盘加密密钥用于加密数据。在启用安全保护前,安全型 物理磁盘的工作方式与任何其他物
注: 如果尚未创建存储阵列的安全密钥,创建密钥选项将处于活动状态。如果已创建存储阵列的安全密 钥,则创建密钥选项将处于非活动状态并在左侧带有一个复选标记。此时,更改密钥选项、保存密钥选 项和验证密钥选项将处于活动状态。 安全物理磁盘选项显示在磁盘组菜单中。如果符合以下条件,则安全物理磁盘选项将处于活动状态: • 所选存储阵列没有启用安全保护,但完全由安全型物理磁盘组成。 • 存储阵列不含任何快照基础虚拟磁盘或快照存储库虚拟磁盘。 • 磁盘组处于“最佳”状态。 • 已为存储阵列设置安全密钥。 注: 如果不符合这些条件,则安全物理磁盘选项将处于非活动状态。 如果磁盘组已启用安全保护,则安全物理磁盘选项将处于非活动状态并在左侧带有一个复选标记。 创建安全磁盘组选项显示在创建磁盘组向导 - 磁盘组名称和物理磁盘选择对话框中。创建安全磁盘组选项仅在 符合以下条件时处于活动状态: • 存储阵列中已安装安全密钥。 • 存储阵列中至少安装了一个安全型物理磁盘。 • 在硬件选项卡中选择的所有物理磁盘都是安全型物理磁盘。 可以擦除启用了安全保护的物理磁盘,以便在另一磁盘组或另一存储阵列中重新使用驱动器
– 密码应至少包含一个数字。 – 密码应至少包含一个非字母数字字符,例如,< > @ +。 5. 在确认新密码中,重新输入在新密码中输入的准确字符串。 6. 在安全密钥标识符中,输入将用作安全密钥标识符组成部分的字符串。 最多可输入不包含空格、标点或符号的 189 个字符数字字符。附加字符将自动生成,并附加到输入的字符 串末尾。生成的字符有助于确保安全密钥标识符的唯一性。 7. 通过执行以下操作之一,输入路径和文件名以保存安全密钥文件: – 通过将文件名添加到路径末尾来编辑默认路径。 – 单击浏览导航到所需文件夹,然后将文件名添加到路径末尾。 8. 在密码短语对话框中,输入密码短语字符串。 密码短语必须: – 长度介于 8 和 32 个字符之间 – 至少包含一个大写字母 – 至少包含一个小写字母 – 至少包含一个数字 – 至少包含一个非字母数字字符,例如,< > @ + 输入的密码短语已屏蔽。 注: 仅当密码短语符合上述条件时,创建密钥才处于活动状态。 9.
1. 在 AMW 菜单栏中,选择存储阵列 → 安全 → 物理磁盘安全 → 更改密钥。 此时将显示确认更改安全密钥窗口。 2. 在文本字段中键入 yes,然后单击确定。 此时将显示更改安全密钥窗口。 3. 在安全密钥标识符中,输入将用作安全密钥标识符一部分的字符串。 您可以将该文本框留空,或输入最多 189 个字母数字字符(不带空格、标点或符号)。附加字符将自动生 成。 4. 编辑默认路径,方法是将文件名添加到路径末尾,或单击浏览以浏览至所需的文件夹并输入文件名。 5. 在密码短语中,输入用作密码短语的字符串。 密码短语必须符合以下条件: – 长度必须介于 8 和 32 个字符之间。 – 必须至少包含一个大写字母。 – 必须至少包含一个小写字母。 – 必须至少包含一个数字。 – 必须至少包含一个非字母数字字符(例如 < > @ +)。 输入的密码短语已屏蔽。 6. 在确认密码短语中,重新输入您在密码短语中输入的相同字符串。 7. 单击更改密钥。 8.
验证安全密钥 存储安全密钥的文件通过“验证安全密钥”对话框进行验证。传输、存档或备份安全密钥时,RAID 控制器模 块会对安全密钥进行固件加密(或包装),并将其存储在文件中。您必须提供密码短语并识别相应的文件才能 解密文件、恢复安全密钥。 仅当存储阵列中的 RAID 控制器模块提供了正确的安全密钥时,才能从启用安全保护的物理磁盘读取数据。如 果将启用安全保护的物理磁盘从一个存储阵列移动至另一个存储阵列,那么也必须将相应的安全密钥导入新的 存储阵列。否则,将无法访问被移动的启用安全保护的物理磁盘上的数据。 有关验证安全密钥的更多信息,请参阅联机帮助主题。 解除锁定安全物理磁盘 可以导出启用了安全保护的磁盘组以将关联的物理磁盘移动到不同的存储阵列。在新存储阵列中安装这些物理 磁盘后,必须先解除锁定物理磁盘,然后才能从这些物理磁盘读取或向其写入数据。要解除锁定物理磁盘,必 须提供原始存储阵列的安全密钥。新存储阵列上的安全密钥与先前的不同,无法解除锁定物理磁盘。 必须提供原始存储阵列上保存的安全密钥文件中的安全密钥。必须提供用于加密安全密钥文件的密码短语,才 能从此文件中提取安全密钥。 有关更多信息,请参阅联机帮助
1. 在 AMW 中,选择硬件选项卡。 2. 选择一个或多个未分配的物理磁盘。 3. 请执行以下操作之一: – 从菜单栏选择硬件 → 热备用保护。 – 右键单击物理磁盘,然后从弹出式菜单中选择热备用保护。 此时将显示热备用物理磁盘选项窗口。 4. 选择相应的选项,可选择: – 查看/更改当前热备用保护 - 用于查看热备用保护和分配或取消分配热备用物理磁盘(如有必 要)。请参阅步骤 5。 – 自动分配物理磁盘 - 用于通过可用的物理磁盘自动创建热备用物理磁盘,以提供最佳热备用保护。 – 手动分配单个物理磁盘 - 用于从硬件选项卡上所选的物理磁盘创建热备用物理磁盘。 – 手动取消分配单个物理磁盘 - 用于取消分配在硬件选项卡上所选的热备用物理磁盘。请参阅步骤 12。 注: 仅当选择已分配的热备用物理磁盘时,方可使用此选项。 5. 要分配热备用物理磁盘,请在热备用保护窗口的热备用保护区域中选择一个磁盘组。 6. 在详细信息区域中,查看关于热备用保护的信息。 7. 单击分配。 此时将显示分配热备用窗口。 8.
• 待机的热备用是已分配为热备用的物理磁盘,可用于接替任何出现故障的物理磁盘。 • 正在使用的热备用是已分配为热备用的物理磁盘,且当前已接替出现故障的物理磁盘。 热备用驱动器保护 可以使用热备用物理磁盘提供附加的数据保护,使数据免受在 RAID 级别 1 或 RAID 级别 5 磁盘组中发生的物理 磁盘故障的影响。如果热备用物理磁盘在物理磁盘故障时可用,RAID 控制器模块会使用冗余数据将故障物理 磁盘中的数据重建到热备用物理磁盘。从物理上更换故障物理磁盘后,系统将执行从热备用物理磁盘到更换后 的物理磁盘的回写操作。如果存储阵列中有安全磁盘组和安全型磁盘组,热备用物理磁盘必须与磁盘组的安全 功能相匹配。例如,非安全型物理磁盘不能用作安全磁盘组的热备用磁盘。 注: 对于安全型磁盘组,首选安全型热备用物理磁盘。如果安全型物理磁盘不可用,则可将非安全型物理 磁盘用作热备用物理磁盘。为确保磁盘组保持为安全型磁盘组,必须将非安全型热备用物理磁盘更换为 安全型物理磁盘。 如果选择安全型物理磁盘作为非安全磁盘组的热备用磁盘,则会显示一个对话框,指示当前正在将安全型物理 磁盘用作非安全磁盘组的热备用磁盘。 磁盘组机柜
RAID 级别 机柜丢失保护条件 由于 RAID 级别 1 至少需要 2 个物理磁盘,因此当存储阵列拥有的扩展机柜少于 2 个 时,将无法实现机柜丢失保护。 RAID 级别 0 由于 RAID 级别 0 不存在一致性,因此无法实现机柜丢失保护。 盘位丢失保护 在包含基于盘位的物理磁盘的扩展机柜中,盘位故障会导致磁盘组中虚拟磁盘上的数据无法访问。 磁盘组的盘位丢失保护基于组成磁盘组的物理磁盘的位置。当单个盘位发生故障时,如果已配置盘位丢失保 护,磁盘组中虚拟磁盘上的数据将仍可访问。在此情况下,如果盘位发生故障且磁盘组受到保护,则磁盘组的 状态将更改为“降级”,但数据仍可访问。 要配置存储以实现盘位丢失保护,请确保组成磁盘组的物理磁盘按照其 RAID 级别位于不同盘位中,如下表所 示。 表.
• 主机组或主机必须使用唯一的 LUN 访问虚拟磁盘。 • • 每台主机都有各自的 LUN 地址空间。MD Storage Manager 允许不同的主机或主机组使用相同的 LUN 访 问存储阵列中的虚拟磁盘。 并非所有操作系统都具有相同数量的可用 LUN。 • 您可以在 AMW 中的主机映射选项卡中定义映射。请参阅使用“主机映射”选项卡。 创建主机到虚拟磁盘的映射 定义映射的原则: • 带外存储阵列无需访问虚拟磁盘映射。如果存储阵列使用带外连接进行管理,并将访问虚拟磁盘映射 分配到默认组,则访问虚拟磁盘映射将分配到默认组中创建的每个主机内。 • 大多数主机在每个存储分区中有 256 个映射的 LUN。LUN 编号从 0 到 255。如果您的操作系统将 LUN 限 制为 127,则尝试将虚拟磁盘映射到大于或等于 127 的 LUN 时,主机将无法对其进行访问。 • 必须使用存储分区向导创建主机组或主机的初始映射,然后才能定义附加映射。请参阅存储分区。 要创建主机到虚拟磁盘的映射,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡。 2.
修改和移除主机到虚拟磁盘的映射 您可能会出于多种原因(例如映射不正确或重新配置存储阵列)修改或移除主机到虚拟磁盘的映射。修改或移 除主机到虚拟磁盘的映射将同时应用于主机和主机组。 小心: 在修改或移除主机到虚拟磁盘的映射之前,请停止对虚拟磁盘的所有数据访问 (I/O),以防止数据丢 失。 要修改或移除主机到虚拟磁盘的映射,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡。 2. 在已定义的映射窗格中,执行以下操作之一: – 选择单个虚拟磁盘,然后选择主机映射 → LUN 映射 → 更改。 – 右键单击虚拟磁盘,然后从弹出式菜单中选择更改。 3. 在主机组或主机中,选择相应的主机组或主机。 默认情况下,下拉列表将显示与所选虚拟磁盘相关联的当前主机组或主机。 4. 在逻辑单元号中,选择相应的 LUN。 下拉列表仅显示与所选虚拟磁盘相关联的当前可用 LUN。 5. 单击确定。 注: 从操作系统停止与此虚拟磁盘相关联的所有主机应用程序,然后卸载此虚拟磁盘(如果适用)。 6.
移除主机到虚拟磁盘的映射 要移除主机到虚拟磁盘的映射,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡。 2. 在定义的映射下选择一个虚拟磁盘。 3. 请执行以下操作之一: – 从菜单栏中,选择主机映射 → LUN 映射 → 移除。 4.
要更改磁盘组的 RAID 级别,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡,然后选择磁盘组。 2. 从菜单栏中选择存储 → 磁盘组 → 更改 → RAID 级别。 3. 选择相应的 RAID 级别并单击是,确认选择。 此时将启动 RAID 级别操作。 使用 Linux DMMP 移除主机到虚拟磁盘的映射 要使用 Linux DMMP 移除主机到虚拟磁盘的映射,请执行以下操作: 1. 卸载包含该虚拟磁盘的文件系统。 使用以下命令:# umount filesystemDirectory 2. 运行以下命令以显示多路径拓扑: # multipath -ll 注: 使用 multipath -ll 命令: – 如果新的 LUN 已映射,将检测到新的 LUN,并为其提供一个多路径设备节点。 – 如果已增加卷容量,将显示新容量。 注: 要从映射中删除的虚拟磁盘。例如,可能显示以下信息: mpath6 (3600a0b80000fb6e50000000e487b02f5) dm-10 DELL, MD32xx [size=1.
注: 如果只是在测试 LUN 移除,则可在此步骤上停止操作。 7.
可使用存储分区向导定义单个存储分区。存储分区向导将指导您完成以下操作所需的主要步骤:指定哪些主机 组、主机、虚拟磁盘和关联的逻辑单元号 (LUN) 将包含在该存储分区中。 出现以下情况时,存储分区将失败: • 所有映射均已定义 • 您为主机组创建的映射与主机组中某主机的既有映射相互冲突 • 您为主机组中某主机创建的映射与主机组的既有映射相互冲突 出现以下情况时,存储分区将不可用: • 主机映射选项卡上的对象树中没有有效的主机组或主机 • 没有为存储分区中包含的主机定义主机端口 • 所有映射均已定义 注: 可以在存储分区中包括次要虚拟磁盘。不过,任何映射到该次要虚拟磁盘的主机均具有只读访 问权限,直至该虚拟磁盘升级为主要虚拟磁盘,或移除镜像关系。 存储分区拓扑是一组元素(例如默认组、主机组、主机和主机端口)的集合,这些元素作为节点显示在 AMW 主机映射选项卡的对象树中。有关更多信息,请参阅使用“主机映射”选项卡。 如果没有定义存储分区拓扑,则每次选择主机映射选项卡时均会显示一个通知对话框。必须先定义存储分区拓 扑,才能定义实际的存储分区。 磁盘组和虚拟磁盘扩展 向磁盘组添加可用容量可
虚拟磁盘扩展 虚拟磁盘扩展属动态修改操作,可增加标准虚拟磁盘的容量。 注: 快照存储库虚拟磁盘可通过 CLI 或 MD Storage Manager 进行扩展。所有其他虚拟磁盘类型仅可通过 CLI 进行扩展。 如果您收到快照存储库虚拟磁盘即将满载的警告,则可通过 MD Storage Manager 扩展快照存储库虚拟磁盘。 有关分步说明,请参阅快照存储库容量。 使用可用容量 您可以使用标准虚拟磁盘或快照存储库虚拟磁盘的磁盘组中的可用容量来增加虚拟磁盘的容量。 存储和复制服务选项卡中显示的“未配置的总容量”节点是已定义磁盘组上未分配容量的连续区域。增加虚拟 磁盘容量时,可能会使用部分或全部可用容量来达成所需的最终容量。执行增加虚拟磁盘容量的步骤时,所选 虚拟磁盘上的数据仍可以访问。 使用未配置的容量 磁盘组中无可用容量时,可以使用未配置容量来增大标准虚拟磁盘或快照存储库虚拟磁盘的容量。通过将未配 置容量(以未分配的物理磁盘的形式)添加到标准虚拟磁盘或快照存储库虚拟磁盘的磁盘组,可实现扩容。请 参阅磁盘组扩展。 有关更多信息,请参阅联机帮助主题。 磁盘组迁移 磁盘组迁移允许导出磁盘组,然后将其导入到另一
导出磁盘组 在源存储阵列上: 1. 保存存储阵列配置。 2. 停止所有 I/O,然后卸载或断开该磁盘组中虚拟磁盘上的文件系统。 3. 备份该磁盘组中虚拟磁盘上的数据。 4. 找到该磁盘组,然后标记物理磁盘。 5. 将磁盘组置于脱机状态。 6.
• • • • 持久保留 映射 虚拟磁盘复制对 快照虚拟磁盘和快照存储库虚拟磁盘 存储阵列介质扫描 介质扫描属于后台运行的操作,可用于检查虚拟磁盘以验证数据是否可访问。此过程将在正常的读写活动中断 之前查找介质错误并向事件日志报告错误。 注: 您不能在由固态磁盘 (SSD) 组成的虚拟磁盘上启用后台介质扫描。 介质扫描发现的错误包括: • • • • 不可恢复的介质错误 - 首次尝试或后续任意尝试均无法读取数据。对于具有冗余保护的虚拟磁盘,数据 将重建、重新写入物理磁盘并验证,同时向事件日志报告错误。对于不具有冗余保护的虚拟磁盘 (RAID 1、RAID 5 和 RAID 6 虚拟磁盘),将不纠正错误,但会向事件日志报告错误。 可恢复的介质错误 - 首次尝试时物理磁盘无法读取数据,但后续尝试可成功读取数据。数据将重新写入 物理磁盘并验证,同时向事件日志报告错误。 冗余不匹配错误 - 虚拟磁盘上发现的前 10 个冗余不匹配将报告至事件日志。 无法修复的错误 - 无法读取数据,且奇偶校验或冗余信息无法用于重新生成数据。例如,冗余信息无法 用于在降级的虚拟磁盘上重建数据。此错误将报告至事件日志。 有关更多
要暂挂介质扫描,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡,然后选择任意虚拟磁盘。 2. 从菜单栏中选择存储 → 虚拟磁盘 → 更改 → 介质扫描设置。 3. 此时将显示更改介质扫描设置窗口。 选择暂挂介质扫描。 注: 此操作适用于磁盘组中的所有虚拟磁盘。 4.
磁盘池和磁盘池虚拟磁盘 8 通过磁盘池,您可以在一组物理磁盘间随机分发来自各个虚拟磁盘的数据。磁盘池能够跨越存储阵列中按逻辑 组合在一起的物理磁盘组提供 RAID 保护和一致的性能。尽管对构成磁盘池的物理磁盘没有最大数量限制,每 个磁盘池必须至少包含 11 个物理磁盘。此外,磁盘池所包含的物理磁盘数量不能超过各存储阵列的最高限 值。各磁盘池中的物理磁盘必须满足以下条件: • 属于 SAS 或近线 SAS • 具有相同的物理磁盘速度(以 RPM 为单位) 注: 标准 SAS 的物理磁盘速度最高为 15,000 rpm,3.
手动创建磁盘池 可以使用存储阵列中未配置的容量创建磁盘池。 注: 确保在创建磁盘池之前已创建虚拟磁盘。 要创建磁盘池,请执行以下操作: 1. 选择存储和复制服务选项卡。 2. 选择未配置的容量节点。 3. 从菜单栏中,选择存储 → 磁盘池 → 创建。或者右键单击对象树中未配置的容量,然后选择创建磁盘池。 此时将显示创建磁盘池窗口。 4. 在磁盘池名称中键入磁盘池的名称。 5. 在物理磁盘安全中选择以下选项之一: – 仅安全型物理磁盘 - 用于从安全型物理磁盘创建安全磁盘池。 注: 仅当为存储阵列设置了安全密钥时,才能使用仅安全型物理磁盘选项。 – 任何可用物理磁盘 - 用于创建由不确定是否为安全型物理磁盘或安全级别不一的物理磁盘构成的磁 盘池。 注: 可以混合使用自加密磁盘 (SED) 和非 SED 物理磁盘。但 SED 物理磁盘的加密能力不能使 用,因为物理磁盘属性不匹配。 根据所选的物理磁盘类型和物理磁盘安全类型,磁盘池候选表显示了一个或多个磁盘池配置。 6.
磁盘池中的每个物理磁盘必须有相同的物理磁盘类型和物理磁盘介质类型,而且容量相似。如果同类型的物理 磁盘数量足够多,MD Storage Manager 会提示创建一个磁盘池。如果未配置的容量包含不同的物理磁盘类型, MD Storage Manager 会提示创建多个磁盘池。 如果存储阵列中已定义磁盘池,而且将相同物理磁盘类型的新物理磁盘添加为磁盘池,则 MD Storage Manager 会提示向现有磁盘池添加物理磁盘。如果新物理磁盘属于不同的物理磁盘类型,MD Storage Manager 会提示向 现有磁盘池添加相同物理磁盘类型的物理磁盘,并使用其他物理磁盘类型创建不同的磁盘池。 注: 如果存在相同物理磁盘类型的多个磁盘池,系统将显示一条消息,指示 MD Storage Manager 无法自动 建议将物理磁盘加入哪个磁盘池。但是,您可以手动向现有磁盘池添加物理磁盘。可以单击否关闭自动 配置对话框,并从 AMW 选择存储阵列 → 磁盘池 → 添加物理磁盘(容量)。 如果在自动配置对话框打开时向存储阵列中添加了附加物理磁盘,可单击更新检测附加的物理磁盘。最佳做法 是,将所有物理磁盘同时添加到存储阵列中
3. 从菜单栏中选存储 → 磁盘池 → 重命名。或者,右键单击磁盘池,然后选择重命名。 此时将显示重命名磁盘池对话框。 4. 在磁盘池名称中键入新名称。 5. 单击确定。 为磁盘池配置警报通知 您可以配置 MD Storage Manager 在磁盘池的未配置(可用)容量达到指定的百分比时发送警报通知。还可以 在创建磁盘池后修改警报通知设置。 要为磁盘池配置警报通知,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡。 2. 选择磁盘池。 3. 从菜单栏中,选择存储 → 磁盘池 → 更改 → 设置。 此时将显示更改磁盘池设置对话框。 4. 在更改警告阈值区域中,选中严重警告通知所对应的复选框。 也可选中预警通知所对应的复选框。 注: 只有在选择严重警告通知后才能选择预警通知。 5. 选择或键入一个值,以指定可用容量的百分比。 当磁盘池中的未配置(可用)容量达到指定的百分比时,SNMP 陷阱消息和电子邮件消息形式的警报通知 将会发送到在配置警报对话框中指定的目标地址。有关如何指定目标地址的更多信息,请参阅“配置警报 通知”。 6.
5. 要添加到磁盘池的可用总容量显示在所选的可用总容量字段中。 单击添加。 配置磁盘池的保留容量 磁盘池中的保留容量专门用于在发生物理磁盘故障时执行数据重建操作。 要配置磁盘池中的保留容量,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡。 2. 选择磁盘池。 3. 从菜单栏中,选择存储 → 磁盘池 → 更改 → 设置。 4. 此时将显示更改磁盘池设置对话框。 在专用于保留容量的物理磁盘框的保留容量区域中,键入或选择物理磁盘数量。 5.
更改磁盘池的 RAID 控制器模块所有权 可以更改磁盘池的 RAID 控制器模块所有权,以指定哪个 RAID 控制器模块必须拥有磁盘池中的所有虚拟磁盘。 在磁盘池级别更改 RAID 控制器模块所有权会导致该磁盘池中的每个虚拟磁盘转移给另一个 RAID 控制器模块并 使用新 I/O 路径。如果不想为每个虚拟磁盘设置新路径,请在虚拟磁盘级别(而非磁盘池级别)更改 RAID 控制 器模块所有权。 小心: 可能无法访问数据 - 如果在应用程序访问磁盘池中的虚拟磁盘时更改 RAID 控制器模块所有权,可能 会导致 I/O 错误。请确保应用程序没有在访问虚拟磁盘,并且主机上已安装多路径驱动程序,然后再执行 此过程。 要更改磁盘池的 RAID 控制器模块所有权,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡。 2. 选择磁盘池。 3. 从菜单栏中,选择存储 → 磁盘池 → 更改 → 所有权/首选路径。 4. 选择 RAID 控制器模块。 5.
随即将开始检查一致性操作并显示检查一致性对话框。磁盘池或磁盘组中的虚拟磁盘将按顺序进行扫描, 从“虚拟磁盘”对话框中的表的顶部开始。扫描每个虚拟磁盘时将发生以下操作: – 在“虚拟磁盘”表中选择虚拟磁盘。 小心: 可能无法访问数据 - 奇偶校验错误可能非常严重并导致数据永久丢失。 – 一致性检查的状态显示在相关状态列中。 删除磁盘池 使用删除选项可删除磁盘池以及其中的所有虚拟磁盘。删除磁盘池后,与其关联的物理磁盘将更改为未分配状 态。此过程将在存储阵列中创建更多未配置的容量,您可以重新配置该容量以满足存储需求。 小心: 可能无法访问数据 - 删除磁盘池会导致其中虚拟磁盘上的所有数据丢失。执行此操作前,请备份磁 盘池中所有虚拟磁盘上的数据,停止所有输入/输出 (I/O),并卸载虚拟磁盘上的所有文件系统。 删除磁盘池之前,请记住以下准则: • • 如果删除包含快照存储库虚拟磁盘的磁盘池,必须先删除基础虚拟磁盘,然后才能删除关联的快照虚 拟磁盘。 所删除磁盘池以前关联的物理磁盘的容量将添加到以下节点之一: – 现有的未配置容量节点。 – 新的未配置容量节点(如果以前不存在这种节点)。 • 不能删除存在以下任
– 选择某个组件,然后在“属性”窗格中单击查看关联物理组件。 – 选择某个组件,然后从菜单栏中选择存储 → 磁盘池 → 查看关联物理组件。 关联物理组件上将显示一个绿色三角形。 安全磁盘池 可从安全型物理磁盘创建安全磁盘池。安全磁盘池中的物理磁盘将启用安全保护。只能通过配置有正确的安全 密钥的 RAID 控制器模块对物理磁盘进行读访问和写访问。 小心: 可能无法访问数据 - 磁盘池受到保护时,移除安全保护的唯一方法是删除磁盘池。删除磁盘池时, 将删除组成磁盘池的虚拟磁盘中的所有数据。 当电源关闭后再次开启时,所有启用安全保护的物理磁盘都会更改为安全锁定状态。在此状态下,只有当 RAID 控制器模块提供正确的安全密钥时,才能访问数据。可从磁盘池属性对话框中查看存储阵列中任意磁盘 池的“物理磁盘安全”状态。系统将报告以下状态信息: • 安全型 • 安全 下表介绍了磁盘池的安全属性状态。 表.
注: 由于在创建精简虚拟磁盘时不分配全部的容量,因此在执行某些操作时会遇到可用容量不足的情况, 例如创建快照映像和快照虚拟磁盘。如果发生这种情况,系统会显示警报阈值警告。 从磁盘池创建精简虚拟磁盘 注: 您只能从磁盘池而非磁盘组创建精简虚拟磁盘。 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择磁盘池中的可用容量节点。 精简虚拟磁盘在磁盘池节点下列出。 3. 选择存储 → 虚拟磁盘 → 创建 → 虚拟磁盘。 此时将显示创建虚拟磁盘窗口。 4. 选择创建精简虚拟磁盘。 5. 使用新虚拟容量框指定新虚拟磁盘的虚拟容量,并使用单位指定要采用的特定容量单位(MB、GB 或 TB)。 最小虚拟容量为 32 MB。 6. 在虚拟磁盘名称框中输入虚拟磁盘的名称。 7. 要将主机映射至虚拟磁盘,请选择以后映射。 转到主机映射选项卡并将特定的主机和 LUN 分配到此虚拟磁盘后,才会为虚拟磁盘分配 LUN 并且可供主 机访问。 8.
13. 如果要更改存储库扩展策略或警告阀值,请单击查看高级存储库设置。 – 存储库扩展策略 – 选择自动或手动。当已消耗的容量接近物理容量时,您可以扩展物理容量。MD 存储管理软件可以自动扩展物理容量,您也可以手动进行扩展。如果选择自动,也可以设置最大 扩展容量。最大扩展容量允许您将虚拟磁盘的自动增长限制在虚拟容量以下。最大扩展容量的值 必须是 4 GB 的倍数。 – 警告阀值 – 在达到存储库容量时发送警报字段中输入百分比。当物理容量达到填满百分比时,MD Storage Manager 会发送警报通知。 14. 单击完成。 此时将显示已成功创建虚拟磁盘窗口。 15.
使用 SSD 高速缓存 9 SSD 高速缓存功能利用固态磁盘 (SSD) 物理磁盘改善存储阵列的只读性能。SSD 物理磁盘以逻辑方式进行分 组,以提供与 RAID 控制器模块内存中的主要高速缓存配合使用的次要高速缓存。 使用 SSD 高速缓存可改善应用程序吞吐量和响应时间,并为各种工作负载(尤其是高 IOP 工作负载)提供稳定 的性能改进。 SSD 高速缓存的工作方式 主机读取数据后,将数据存储在 DRAM 中,从用户指定的基本虚拟磁盘复制数据并存储到两个内部 RAID 虚拟 磁盘(每个 RAID 控制器模块一个)上。当您最初设置 SSD 高速缓存时会自动创建这些虚拟磁盘。这两个虚拟 磁盘都不允许读写操作访问,也无法在 MD Storage Manager 界面中显示和管理。 使用简单虚拟磁盘 I/O 机制向 SSD 高速缓存移入和移出数据。 通过将数据存储在 SSD 高速缓存上,将不再需要重复访问基本虚拟磁盘。但是,两个 SSD 高速缓存虚拟磁盘 都计入存储阵列所支持的虚拟磁盘总数。 SSD 高速缓存的优点 使用 SSD 高速缓存功能的优点会根据您的系统配置和网络环境而变化。但是,通常从使用高性能
SSD 高速缓存限制 使用 SSD 高速缓存功能时适用以下限制: • 在快照(传统)虚拟磁盘或基于 PiT 的快照映像上不支持 SSD 高速缓存。 • 如果导入或导出启用或禁用了 SSD 高速缓存的基本虚拟磁盘,则不会导入或导出缓存的数据。 • 存储阵列上的最大可用 SSD 高速缓存容量取决于 RAID 控制器模块的主要高速缓存容量。 • 在删除 SSD 高速缓存之前,不能移除 SSD 高速缓存中的最后一个物理磁盘。 • 每个存储阵列仅支持一个 SSD 高速缓存。 创建 SSD 高速缓存 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 请执行以下操作之一: – 在树形视图中,右键单击 SSD 高速缓存,然后选择创建。 – 从菜单栏中,选择存储 → SSD 高速缓存 → 创建 。 此时将显示创建 SSD 高速缓存窗口。 3. 为 SSD 高速缓存名称键入名称。 4. 选择以下 I/O 特性类型中的一种: – 文件系统 – 数据库 – Web Server 5. 为 Data Assurance (DA) 选择合适的选项。 6.
4. 要查看关联机柜中安装的组件,请单击查看机柜组件。 定位 SSD 高速缓存中的物理磁盘 要定位 SSD 高速缓存中的物理磁盘,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡。 2. 在树形视图中,选择 SSD 高速缓存,然后执行以下操作之一: – 从菜单栏中,选择存储 → SSD 高速缓存 → 闪烁 。 – 右键单击 SSD 高速缓存并选择闪烁。 包含 SSD 高速缓存的物理磁盘上的 LED 将闪烁。 3. 定位物理磁盘后,单击确定。 LED 停止闪烁。 4. 如果磁盘组的 LED 并未停止闪烁,请从 AMW 的工具栏中选择硬件 → 闪烁 → 停止所有指示 。 如果 LED 成功停止闪烁,将显示确认消息。 5. 单击确定。 向 SSD 高速缓存添加物理磁盘 要向 SSD 高速缓存添加物理磁盘,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡。 2.
暂挂或恢复 SSD 高速缓存 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 在树形视图中,选择 SSD 高速缓存,然后执行以下操作之一: – 从菜单栏中,选择存储 → SSD 高速缓存 → 暂挂 。 – 右键单击 SSD 高速缓存并选择暂挂。 在 SSD 高速缓存的表格视图中,状态显示为暂挂。 3. 要恢复 SSD 高速缓存,请执行以下操作之一: – 从菜单栏中,选择存储 → SSD 高速缓存 → 恢复 。 – 右键单击 SSD 高速缓存并选择恢复。 在 SSD 高速缓存的表格视图中,状态显示为最佳。 更改 SSD 高速缓存中的 I/O 类型 要更改 SSD 高速缓存中的 I/O 类型,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡。 2.
此时将显示确认删除 SSD 高速缓存窗口。 3. 键入 yes 确认,然后单击删除。 使用性能建模工具 通过使用其特性与生产中相同的工作负载来运行 SSD 高速缓存性能建模工具,可帮助确定 SSD 高速缓存容量 方面的性能改进。此工具使用以下指标来提供性能估计数据:高速缓存命中百分比和平均响应时间。此工具显 示所创建的物理 SSD 高速缓存的实际性能。 要运行性能建模工具,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡。 2. 要访问性能建模工具,请在逻辑树形视图中高亮度显示 SSD 高速缓存节点。 3. 请执行以下操作之一: – 从菜单栏中,选择存储 → SSD 高速缓存 → 运行性能建模 。 – 右键单击 SSD 高速缓存并选择运行性能建模。 此时将显示 SSD 高速缓存性能建模窗口。 4. 查看 SSD 高速缓存性能建模窗口的建模信息区域中的信息。 5. 通过选择查看结果中的以下选项之一,选择要以什么格式查看结果: – 响应时间 6.
高级功能 - 快照虚拟磁盘 10 MD 存储阵列支持以下类型的虚拟磁盘快照高级功能: • 使用多个时间点 (PiT) 组的快照虚拟磁盘 • 为每个快照使用单独存储库的快照虚拟磁盘(传统) 注: 本节介绍使用 PiT 组的快照虚拟磁盘。如果正在使用快照虚拟磁盘(传统)高级功能,请参阅高级功 能 - 快照虚拟磁盘(传统)。 快照映像是在特定时间点(通常称为还原点)创建的关联基本虚拟磁盘内容的逻辑映像。主机无法直接读取或 写入此类映像,因为快照映像仅用于保存来自基本虚拟磁盘的数据。要允许主机访问快照映像中的数据的副 本,必须创建快照虚拟磁盘。快照虚拟磁盘包含自己的存储库,该存储库用于保存主机应用程序对基本虚拟磁 盘所做的后续修改,而不会影响参考快照映像。 快照虚拟磁盘与快照虚拟磁盘(传统) 所有快照虚拟磁盘映像都是虚拟磁盘的逻辑时间点映像。但是,快照虚拟磁盘高级功能与快照虚拟磁盘(传 统)高级功能之间存在以下差异: • 快照虚拟磁盘(传统)高级功能为每个快照使用一个数据存储库。非传统快照虚拟磁盘高级功能为与 一个基本虚拟磁盘关联的所有快照映像使用一个数据存储库。因此,每个虚拟磁盘只需要一次写入操 作
快照虚拟磁盘读/写属性 快照虚拟磁盘可被指定为只读或读写。 这两者之间有以下区别: • • 只读快照虚拟磁盘向主机提供对快照映像中包含的数据副本的读取访问权限。但是,主机无法修改快 照映像。只读快照虚拟磁盘不需要关联存储库。 读写快照虚拟磁盘需要关联存储库来向主机提供对快照映像中所含数据副本的写入访问权限。读写快 照虚拟磁盘需要自己的存储库,该存储库用于保存主机应用程序对基本虚拟磁盘所做的任何后续修 改,而不会影响引用的快照映像。从分配原始快照映像的存储池中分配该快照。对快照映像的所有 I/O 写入都被重定向到分配用于保存数据修改的快照虚拟磁盘存储库。原始快照映像的数据保持不变。有 关更多信息,请参阅了解快照存储库。 快照组和一致性组 快照虚拟磁盘高级功能支持以下类型的快照组: • 快照组 - 快照组是指单个关联基本虚拟磁盘的时间点映像的集合。 • 一致性组 - 一致性组是可以作为一个整体进行管理的一组虚拟磁盘。在一致性组上执行的操作会同时在 组中的所有虚拟磁盘上执行。 快照组 快照组的用途是在给定的基本虚拟磁盘上创建一系列快照映像,而不影响性能。您可以为快照组建立一个计 划,从而在以后的特定时间
对于一致性组,适用以下原则: • • • • • • • 一致性组在创建之初可以包含或不含成员虚拟磁盘。 可以为一致性组创建快照映像,以便为所有成员虚拟磁盘启用一致性快照映像。 一致性组可以回滚。 虚拟磁盘可以属于多个一致性组。 一致性组只能包含标准虚拟磁盘和精简虚拟磁盘。 使用快照虚拟磁盘(传统)高级功能创建的快照不能加入一致性组。 基本虚拟磁盘可以位于磁盘组或磁盘池中。 了解快照存储库 存储库是系统创建的虚拟磁盘,用于保存写入快照、快照组和一致性组的数据。在创建组或可写快照虚拟磁盘 的过程中,会自动创建关联存储库。默认情况下,为每个组或快照创建一个存储库虚拟磁盘。可以使用默认设 置自动创建总存储库,也可以通过定义特定容量设置来手动创建存储库。 快照虚拟磁盘允许主机访问快照映像中包含的数据副本。主机不能直接读取或写入快照映像,并且快照映像仅 用于保存从基本虚拟磁盘捕获的数据。 一致性组存储库 一致性组由多个虚拟磁盘的同步快照构成。每个属于一致性组的虚拟磁盘被称为成员虚拟磁盘。将虚拟磁盘添 加到一致性组时,系统会自动创建对应此成员虚拟磁盘的新快照组。必须为一致性组中的每个成员虚拟磁盘创 建一致性组存储库
• 标准虚拟磁盘 • 精简虚拟磁盘 • 一致性组 在创建快照映像之前,请考虑以下原则: • 如果尝试为快照组创建快照映像,而该快照组已达到其最大快照映像数量,则可以在执行以下操作之 一后再次尝试创建快照映像: – 在创建向导的高级选项部分,启用快照映像自动删除。 – 手动从快照组中删除一个或多个快照映像。 • 如果您尝试创建快照映像并遇到以下任一状况,则创建会保持挂起状态: – 包含此快照映像的基本虚拟磁盘是远程复制组的成员。 – 基本虚拟磁盘当前正在进行同步。当同步完成时,快照映像创建即完成。 • 不能在出现故障的虚拟磁盘或指定为保留的快照组上创建快照映像。 创建快照映像 您可以通过选择基本虚拟磁盘或选择现有快照组来创建快照映像。 要从现有基本虚拟磁盘创建快照映像,请执行以下操作: 1. 在 AMW 中,选择要备份的基本虚拟磁盘,然后选择备份服务 → 快照映像 → 创建 。 2. 此时将显示选择或创建快照组窗口。 请执行以下操作之一: – 如果快照组已经存在于基本虚拟磁盘上,或者基本虚拟磁盘的快照组数已达到上限,则默认情况 下会选中现有快照组单选按钮。转至步骤 3。 3.
取消挂起的快照映像 使用取消挂起的快照映像选项可取消尝试为快照组或一致性组创建快照映像时进入挂起状态的快照映像。 快照由于以下并发条件而进入挂起状态: • • 快照组的基本虚拟磁盘,或包含此快照映像的一致性组的一个或多个成员虚拟磁盘属于异步远程复制 组的成员。 一个或多个虚拟磁盘目前正在进行同步操作。 同步操作完成时,快照映像创建操作即完成。在同步操作完成前,要取消挂起的快照映像创建,请执行以下操 作: 1. 在 AMW 中,选择包含挂起的快照映像的快照组或一致性组。 2.
计划快照映像 使用 MD Storage Manager 可以计划定期创建快照映像,以支持文件恢复和计划备份。您可以为现有快照组或 一致性组创建计划,也可以在最初创建快照组或一致性组时创建计划。 • 您可以为快照组建立一个计划,从而在以后的特定时间或定期自动创建快照映像。 • 您可以为一致性组建立一个计划,从而在以后的特定时间或定期自动创建组中每个成员虚拟磁盘的快 照映像。 您可以创建每天或每周运行的计划,在创建每周运行的计划时,选择一周中的星期几(星期日至星期六)。要 让计划变得更简单,您可以导入某个快照组或一致性组的现有计划。此外,您还可以通过禁用计划来临时暂挂 计划的快照映像创建。当计划被禁用时,计划的快照映像创建不会发生。 创建快照计划 使用 MD Storage Manager 可以计划定期创建快照映像,以支持文件恢复和计划备份。您可以在最初创建快照 组或一致性组时创建计划,也可以向现有快照组或一致性组添加计划。创建快照映像计划后,可以修改这些计 划和其他计划设置。 以下原则适用: • 使用计划会产生大量快照映像,因此请确保您有充足的存储库容量。 • 每个快照组或一致性组只能拥有一个
编辑快照计划 使用编辑快照映像计划选项可以修改为快照组或一致性组定义的计划设置。您也可以使用编辑快照映像计划选 项临时暂挂计划的快照映像创建,方法是禁用该计划。当计划被禁用时,计划的快照映像创建不会发生。 要编辑计划,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择要为其编辑计划的快照组或一致性组。 3. 请执行以下操作之一: – 备份服务 → 快照组 → 编辑快照映像计划。 – 备份服务 → 一致性组快照映像 → 创建/编辑计划。 4. 此时将显示编辑快照映像计划窗口。 请执行以下操作之一: – 如果要禁用计划,请取消选中启用快照映像计划。 – 如果要使用不同的现有计划,请单击从现有计划导入设置。此时将显示导入计划设置对话框。从 现有计划表中选择要导入的新计划,然后单击导入。 5.
• • • – 进行虚拟磁盘扩展 (VDE) 以增加虚拟磁盘的容量。 – 将磁盘组迁移到不同的 RAID 级别。 – 更改虚拟磁盘的分段大小。 如果基本虚拟磁盘正参与虚拟磁盘备份,则无法开始回滚操作。 如果基本虚拟磁盘是远程备份中的次要虚拟磁盘,则无法开始回滚操作。但是,如果基本虚拟磁盘是 远程备份中的主要虚拟磁盘,则可以开始回滚操作。此外,如果主要虚拟磁盘正参与回滚操作,则无 法执行远程复制中的角色倒转。 如果关联快照存储库虚拟磁盘中任何已使用容量中有不可读扇区,则回滚操作将失败。 注: 还可使用命令行界面 (CLI) 来同时启动多个快照映像的回滚操作,取消、恢复回滚操作,修改回滚操作 优先级,以及查看回滚操作进度。 启动快照回滚 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 请执行以下操作之一: – 选择基本虚拟磁盘的快照映像,然后选择备份服务 → 快照映像 → 回滚 → 开始 。 – 选择一致性组快照映像,然后选择备份服务 → 一致性组快照映像 → 回滚 → 开始。 根据您的选择,将显示确认回滚快照映像或确认回滚快照映像窗口。 3.
返回到不可用状态,并在 MD Storage Manager 中显示为失败。因此,只有存在恢复基本虚拟磁盘内容的恢复 选项时,才可考虑取消回滚操作。 取消回滚操作后,必须执行以下操作之一: • 重新初始化基本虚拟磁盘的内容。 • 执行新回滚操作以还原基本虚拟磁盘(使用在取消回滚操作中使用的同一快照映像,或者使用不同的 快照映像来执行新回滚操作)。 注: 如果该快照映像所属的快照组包含一个或多个自动清除的快照映像,则用于回滚操作的快照映像不能 用于将来的回滚。 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择基本虚拟磁盘或一致性组成员虚拟磁盘的快照映像,然后选择备份服务 → 快照映像 → 回滚 → 高级 → 取消。 此时将显示确认取消回滚窗口。 3. 单击恢复。 4. 单击是取消回滚操作。 5.
1. 在 AMW 中,选择存储和备份服务选项卡。 2. 请执行以下操作之一: – 选择基本虚拟磁盘或一致性组成员虚拟磁盘的快照映像,然后选择备份服务 → 快照映像 → 回滚 → 更改优先级 。 – 选择基本虚拟磁盘或一致性组成员虚拟磁盘的一致性组,然后选择备份服务 → 一致性组快照映像 → 回滚 → 更改优先级。 此时将显示更改回滚优先级窗口。 3. 在回滚优先级区域,使用滚动条设置回滚操作的优先级。 如果是更改一致性组快照映像的优先级,则优先级设置将应用到所选一致性组中的所有成员虚拟磁盘。 4.
注: 如果要指定快照组存储库的所有可自定义设置,请使用此选项。手动方法属于高级方法,只有了 解物理磁盘冗余和最佳物理磁盘配置的人员才应使用此方法。有关如何设置存储库参数的说明,请 参阅“创建快照组存储库(手动)”。 6.
8. 选择查看高级选项,然后根据情况接受或更改下面的默认设置。 有关高级设置的更多信息,请参阅联机帮助主题。 9. 单击完成。 更改快照组设置 使用快照组更改设置选项可修改创建快照组时配置的自动删除设置和快照组存储库设置。 • • 自动删除设置 - 您可以配置每个快照组,使组中保留的快照映像总数等于或少于用户定义的最大值。如 果启用此选项,当创建新的快照时,为了符合组允许的最大快照映像数量限制,系统会自动删除组中 最旧的快照。 快照组存储库设置 - 您可以定义快照组成员存储库的最高百分比,该值决定当快照组存储库的容量达到 定义的百分比时,将触发警告。此外,您可以指定当快照组存储库的容量达到定义的最高百分比时, 使用何种策略: – 自动清除最旧的快照映像 - 系统自动清除快照组中最旧的快照映像,从而释放存储库的保留空 间,以供在快照组中重复使用。 • 1. 2.
• 从快照组删除所有现有快照映像。 • 删除与该快照组关联的存储库(如果选中)。 • 禁用与所删除的快照映像关联的所有快照虚拟磁盘。 要删除快照组,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择要删除的快照组,然后选择备份服务 → 快照组 → 删除 。 此时将显示确认删除窗口。 3. 如果要删除与该快照组关联的存储库,请选择删除与此对象关联的所有存储库? 4.
将快照虚拟磁盘转换为可读写 使用将快照虚拟磁盘转换为可读写选项可将只读快照虚拟磁盘转换为读写快照虚拟磁盘。 您可以对下列存储对象使用将快照虚拟磁盘转换为可读写选项: • 快照虚拟磁盘 • 一致性组成员的快照虚拟磁盘 转换操作要求配置一个存储库,以支持对快照虚拟磁盘执行写入操作。 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择快照虚拟磁盘或一致性组成员的快照虚拟磁盘,然后选择备份服务 → 快照虚拟磁盘 → 转换为可读写 。 选择如何创建读写快照虚拟磁盘的存储库。请执行以下操作之一: 3. – 选择自动以使用默认容量设置创建快照虚拟磁盘存储库。建议使用此选项。 – 选择手动以定义快照虚拟磁盘存储库的属性。如果要指定快照虚拟磁盘存储库的所有可自定义设 置,请使用此选项。手动方法属于高级方法,只有了解物理磁盘一致性和最佳物理磁盘配置的人 员才应使用此方法。有关如何设置存储库参数的更多信息,请参阅联机帮助主题。 4.
– 包含此一致性组快照映像的基本虚拟磁盘是异步远程复制组的成员。 – 基本虚拟磁盘当前处于同步操作中。同步操作完成时,一致性组快照映像创建操作即完成。 要创建一致性组,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择备份服务 → 一致性组 → 创建 。 此时将显示一致性组设置窗口。 3. 在一致性组名称字段中,输入最适合描述要为此组添加的成员虚拟磁盘的唯一名称(最多 30 个字符)。 默认情况下,名称文本框中显示的一致性组名称如下: CG + 序列号 在此例中,CG(一致性组)是前缀,序列号是一致性组的顺序编号,并基于当前存在的一致性组数量递 增。 4.
1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择备份服务 → 一致性组 → 创建。 此时将显示一致性组设置窗口。 3. 选择手动并单击下一步以自定义一致性组的存储库候选设置。 此时将显示一致性组存储库设置 - 手动窗口。 4. 根据占基本虚拟磁盘容量的百分比或首选容量,选择您希望如何筛选一致性组中的每个成员虚拟磁盘的存 储库候选。 有关筛选选项的更多信息,请参阅联机帮助主题。 系统将基于您所做的选择,显示最适合每个成员虚拟磁盘的存储库候选。 5. 如果要编辑成员虚拟磁盘的存储库候选,请选择编辑单独的存储库候选。 6.
删除一致性组 使用删除一致性组选项可删除一致性组。 删除一致性组时,系统会删除以下内容: • 一致性组中的所有现有快照映像。 • 一致性组中的所有现有快照虚拟磁盘。 • 一致性组中的每个成员虚拟磁盘的所有关联快照映像。 • 一致性组中的每个成员虚拟磁盘的所有关联快照虚拟磁盘。 • 一致性组中的每个成员虚拟磁盘的所有关联存储库(如果选中)。 要删除一致性组,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择要删除的一致性组,然后选择备份服务 → 一致性组 → 删除 。 3. 此时将显示确认删除窗口。 如果要删除与该一致性组关联的存储库,请选择删除与此一致性组关联的所有存储库。 4.
• 存储阵列上必须启用快照高级功能。 • 要添加新的成员虚拟磁盘,一致性组具有的虚拟磁盘数必须少于最多可允许的虚拟磁盘数(由配置定 义)。 • 如果基本虚拟磁盘位于标准磁盘组中,则任何关联一致性组的存储库成员都可以位于标准磁盘组或磁 盘池中。如果基本虚拟磁盘位于磁盘池中,则任何关联一致性组的存储库成员必须位于与基本虚拟磁 盘相同的磁盘池中。 您不能添加处于故障状态的成员虚拟磁盘。 • 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 请执行以下操作之一: 3. – 选择要添加到一致性组的基本虚拟磁盘,然后选择存储 → 虚拟磁盘 → 备份服务 → 添加到一致性 组。此时将显示选择一致性组和存储库窗口。 – 选择要添加成员虚拟磁盘的一致性组,然后选择备份服务 → 一致性组 → 添加成员虚拟磁盘。此 时将显示选择虚拟磁盘和存储库窗口。 根据步骤 2 中的选择,执行以下操作之一: 4.
5.
5. 在主机映射下拉列表中,指定要将主机映射到快照虚拟磁盘的方式。 – 立即映射到默认组 – 系统会自动为虚拟磁盘分配一个逻辑单元号 (LUN),并且连接到存储阵列的 任何主机都能访问该虚拟磁盘。 – 以后映射 – 直至您转到主机映射选项卡并对此虚拟磁盘分配特定的主机和 LUN 之前,不会为该虚 拟磁盘分配 LUN 且任何主机都无法访问它。 – 选择特定主机 – 您可以从列表中选择特定的主机或主机组。此选项仅在启用存储分区时才可用。 注: 请确保选择用来映射到快照虚拟磁盘的主机或主机组上有足够的可用 LUN。 6.
有关更多信息,请参阅联机帮助主题。 3. 系统将显示您选择的存储库候选。 从存储库候选表中选择要用于快照虚拟磁盘的存储库,并选择最接近所指定容量的存储库候选。 4. – 存储库候选表显示新的和现有的存储库,基于您指定的百分比值或首选容量值,这些存储库可用 于该快照虚拟磁盘。 – 差异列会显示所选容量与存储库候选实际容量之间的差数。如果存储库候选是新的,则系统会使 用您指定的精确容量大小,同时在差异列中显示零 (0)。 在已满百分比框中,定义当快照虚拟磁盘存储库的容量达到定义的百分比时,触发警告的值。 5. 单击完成。 更改快照虚拟磁盘的设置 使用更改快照虚拟磁盘设置选项修改在创建快照虚拟磁盘时配置的存储库设置。可以修改快照虚拟磁盘存储库 的最大百分比,以便在快照虚拟磁盘存储库的容量达到定义的百分比时发出警告。 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择基本虚拟磁盘,然后选择备份服务 → 快照虚拟磁盘 → 更改设置。 3. 此时将显示更改快照虚拟磁盘设置窗口。 根据需要修改存储库已满设置。 4.
3.
1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择要禁用的快照虚拟磁盘或一致性组快照虚拟磁盘,然后选择以下操作之一: – 备份服务 → 快照虚拟磁盘 → 重命名。此时将显示重命名快照虚拟磁盘窗口。 3.
1. 在 AMW 中,选择存储和备份服务选项卡。 2. 请执行以下操作之一: – 选择一致性组,然后选择备份服务 → 一致性组 → 创建一致性组快照虚拟磁盘。此时将显示选择 现有快照映像或新快照映像窗口。转至步骤 3。 3. – 从一致性组快照映像表中选择一致性组快照映像,然后选择备份服务 → 一致性组快照映像 → 创 建一致性组快照虚拟磁盘。此时将显示一致性组快照虚拟磁盘设置窗口。转至步骤 4。 如果在步骤 2 中选择了一致性组,请选择要为其创建快照虚拟磁盘的一致性组快照映像。请执行以下操作 之一: – 选择现有快照映像,再从一致性组快照映像表中选择快照映像,然后单击下一步。 – 选择新快照映像,再从现有快照组表中选择快照组,然后单击下一步。 4.
如果要指定快照虚拟磁盘存储库的所有可自定义设置,请使用此选项。手动方法属于高级方法,只有了解 物理磁盘一致性和最佳物理磁盘配置的人员才应使用此方法。 有关如何设置存储库参数的更多信息,请参阅联机帮助主题。 在导航树中将显示关联一致性组的快照虚拟磁盘及其属性。 创建一致性组快照虚拟磁盘存储库(手动) 在创建指定为读写的一致性组快照虚拟磁盘期间,系统需要为一致性组的每个成员创建一个快照虚拟磁盘存储 库,以便为主机应用程序提供对快照映像中所含数据的副本的写访问权限。您可以使用默认设置自动创建存储 库,也可以通过定义存储库的容量设置来手动创建存储库。 总存储库在创建之初包含一个存储库虚拟磁盘。但是,将来总存储库可以包含多个存储库虚拟磁盘,以便进行 扩展。 使用创建一致性组快照虚拟磁盘存储库 - 手动选项可以手动定义一致性组快照虚拟磁盘存储库的容量需求。手 动方法属于高级方法,只有了解物理磁盘冗余、配置和最佳物理磁盘配置的人员才应使用此方法。 以下原则适用: • 快照虚拟磁盘存储库对容量有最低要求(取决于具体配置)。 • 为存储库定义容量需求时,应考虑针对该磁盘组或磁盘池中其他虚拟磁盘的所有潜在需求。请确保容
禁用快照虚拟磁盘或一致性组快照虚拟磁盘 当您想要让某个快照副本或一致性组快照虚拟磁盘失效时,请使用禁用选项。如果该快照虚拟磁盘或一致性组 快照虚拟磁盘被指定为读写,此选项还允许您停止对其关联快照存储库虚拟磁盘的任何后续写入活动。 当符合以下任一条件时,使用禁用选项: • 您暂时已完成该快照虚拟磁盘或一致性组快照虚拟磁盘的操作。 • 您想要以后重新创建该快照虚拟磁盘或一致性组快照虚拟磁盘(指定为读写),并且希望保留关联的 快照存储库虚拟磁盘,从而不需要重新创建。 • 您想要通过停止对快照存储库虚拟磁盘的写入活动,最大限度地提升存储阵列的性能。 如果您决定重新创建该快照虚拟磁盘或一致性组快照虚拟磁盘,则必须选择同一基本虚拟磁盘的快照映像。 如果您禁用快照虚拟磁盘或一致性组快照虚拟磁盘,系统将执行以下操作: • 保留快照虚拟磁盘或一致性组快照虚拟磁盘的全局名称 (WWN)。 • 保留快照虚拟磁盘或一致性组快照虚拟磁盘与同一基本虚拟磁盘之间的关联。 • 保留快照虚拟磁盘或一致性组快照虚拟磁盘的关联存储库(如果该虚拟磁盘被指定为读写)。 • 保留所有主机映射和访问权限(所有读写请求将失败)。
• 您无法重新创建个别成员快照虚拟磁盘,只能重新创建整个一致性组快照虚拟磁盘。 • 所有关联快照存储库虚拟磁盘上的所有写入数据都被删除。快照虚拟磁盘或一致性组快照虚拟磁盘的 参数与以前禁用的虚拟磁盘参数保持相同。快照虚拟磁盘或一致性组快照虚拟磁盘的原始名称会保 留。重新创建选项完成之后,可更改这些名称。 要重新创建快照虚拟磁盘或一致性组快照虚拟磁盘,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择要禁用的快照虚拟磁盘或一致性组快照虚拟磁盘,然后选择以下操作之一: – 备份服务 → 快照虚拟磁盘 → 重新创建。此时将显示确认重新创建快照虚拟磁盘窗口。 3.
• 这些设置应用于该总存储库中包含的所有个别存储库虚拟磁盘。 要更改介质扫描设置,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡,然后选择任意虚拟磁盘。 2. 选择要更改其介质扫描设置的存储对象。 3. 选择总存储库 → 更改介质扫描设置。 4. 此时将显示更改介质扫描设置窗口。 选择启用介质扫描。 5.
• 快照组 • 快照虚拟磁盘 • 一致性组成员虚拟磁盘 • 一致性组成员快照虚拟磁盘 • 复制对 在您收到总存储库即将填满的警告时使用此选项。可执行以下任务之一来增加存储库容量: • 添加一个或多个现有存储库虚拟磁盘。 • 使用磁盘组或磁盘池上的可用容量创建新存储库虚拟磁盘。 注: 如果所有磁盘组或磁盘池上都没有可用容量,则可以采用未使用的物理磁盘的形式将未配置的 容量添加到磁盘组或磁盘池。 如果出现以下任一情况,则无法增加总存储库的存储容量: • 您要添加的存储库虚拟磁盘未处于“最佳”状态。 • 您要添加的磁盘组或磁盘池中的某个存储库虚拟磁盘处于某种修改状态。 • 在您要添加的磁盘组或磁盘池中没有可用容量。 • 在您要添加的磁盘组或磁盘池中没有未配置容量。 • 不存在合格的现有存储库虚拟磁盘(包括不匹配的 DS 属性)。 • 确保基本虚拟磁盘和总存储库中的各个存储库虚拟磁盘具有相同的数据服务 (DS) 属性,特别对于以下 特性: • RAID 级别 - 位于磁盘池中的存储库被视为与磁盘组中的所有基本虚拟磁盘具有匹配的 RAID 级别,这与 基本虚拟磁盘的
6.
执行重新激活操作 如果存储对象在修复故障之后没有自动过渡到最佳状态,使用重新激活选项可以强制让它进入最佳状态。 可以为以下存储对象使用重新激活选项: • 快照组 • 快照虚拟磁盘 • 一致性组成员虚拟磁盘 • 一致性组成员快照虚拟磁盘 注: 请仅在 Recovery Guru 步骤或技术支持代表的指导下使用重新激活选项。此操作一旦开始便无法取消。 在您收到总存储库即将填满的警告时使用此选项。可执行以下任务之一来增加存储库容量: • 添加一个或多个现有存储库虚拟磁盘。 • 使用磁盘组或磁盘池上的可用容量创建新存储库虚拟磁盘。 注: 如果所有磁盘组或磁盘池上都没有可用容量,则可以采用未使用的物理磁盘的形式将未配置的 容量添加到磁盘组或磁盘池。 小心: 在仍然存在故障时使用“重新激活”选项会导致数据损坏或丢失,而存储对象将返回故障状 态。 1. 在 AMW 中,选择存储和备份服务选项卡。 2.
高级功能 - 快照虚拟磁盘(传统) 11 MD 存储阵列支持以下类型的虚拟磁盘快照高级功能: • 使用多个时间点 (PiT) 组的快照虚拟磁盘 • 为每个快照使用单独存储库的快照虚拟磁盘(传统) 注: 本节介绍快照虚拟磁盘(传统)高级功能。 注: 如果订购了此功能,在收到的 Dell PowerVault MD 存储阵列包装箱中会看到高级功能激活卡。请按照 卡片上的说明获取密钥文件并启用该功能。 注: 快照功能允许每个 LUN 最多同时存在 8 个快照,每个阵列最多同时存在 128 个快照。 快照虚拟磁盘是存储阵列中虚拟磁盘的时间点映像。它不是包含原始数据副本的实际虚拟磁盘,而是对虚拟磁 盘在特定时间包含的数据的引用。快照虚拟磁盘与完整的物理磁盘是逻辑对等关系。但是,快照虚拟磁盘的创 建速度比物理副本快很多,使用的磁盘空间也少。 快照所基于的虚拟磁盘被称做源虚拟磁盘,必须是存储阵列中的标准虚拟磁盘。一般而言,创建快照的目的 是,在源虚拟磁盘保持联机和可访问性的同时,让应用程序(例如,备份应用程序)能够访问快照并读取数 据。 注: 创建虚拟磁盘快照时,源虚拟磁盘上不接受 I/O 请求。 创建快照虚拟
计划快照虚拟磁盘的常见原因 在数据存储环境中,计划快照虚拟磁盘的目的有多种。快照计划程序最常见的用途如下: • 数据备份 • 从数据丢失事件中快速恢复 计划的数据备份可定期、不受监测地保护数据免于丢失。例如,如果一个应用程序将业务关键数据存储在存储 阵列的两个虚拟磁盘上,您可能会选择每天执行自动备份。要实施此备份,请选择第一个虚拟磁盘,然后创建 从星期一至星期五、每天在工作日结束到晚 11 点之间的某个时间运行一次的备份计划。不要选择结束日期。 对第二个虚拟磁盘应用相同的计划,然后将两个快照虚拟磁盘映射到备份主机服务器,并执行常规备份过程。 请记住,先取消映射生成的两个快照虚拟磁盘,然后再开始下一个计划的快照。如果没有取消映射快照虚拟磁 盘,存储阵列不会执行下一个计划的快照操作,以避免损坏数据。 计划的快照在发生数据丢失时也有很大的价值。例如,如果在每个工作日结束时备份数据,并在上午 8 点到下 午 5 点之间每小时保留一份快照,则可在不到一小时的窗口内从快照恢复数据。要完成这种类型的快速恢复, 请创建一个包含起始时间上午 8 点和结束时间下午 5 点的计划,然后选择从星期一至星期五每天 10 个快照
• 快照存储库虚拟磁盘容量 - 快照存储库虚拟磁盘容量表示为源虚拟磁盘容量的百分比。允许的最大百分 比为 120%。 使用简单路径时,以下默认设置用于快照虚拟磁盘的其他参数: • 容量分配 - 使用源虚拟磁盘驻留的磁盘组上的可用容量创建快照存储库虚拟磁盘。 • 主机到虚拟磁盘的映射 - 默认设置为立即映射。 • 满载百分比 - 当快照存储库虚拟磁盘达到指定的存储库满载百分比级别时,该事件将记录在重大事件日 志 (MEL) 中。快照存储库满载百分比级别默认为源虚拟磁盘的 50%。 • 快照存储库虚拟磁盘满载状态 - 快照存储库虚拟磁盘变满时,可以选择不对源虚拟磁盘或快照虚拟磁盘 进行写入活动。 准备主机服务器以使用简单路径创建快照 • • • • 在 Microsoft Windows 群集配置中使用快照虚拟磁盘高级功能之前,首先必须将快照虚拟磁盘映射到拥 有源虚拟磁盘的群集节点。此操作可确保群集节点正确识别快照虚拟磁盘。 在完成快照启用过程之前将快照虚拟磁盘映射到不具有源虚拟磁盘的节点,可能会导致操作系统错误 识别快照虚拟磁盘。进而可能导致源虚拟磁盘上的数据丢失或无法访问快照。 有关将快
7. 8. 9. 单击完成。 此时将显示已完成窗口。 单击确定。 创建一个或多个快照虚拟磁盘之后,装载源虚拟磁盘,并使用此源虚拟磁盘重新启动主机应用程序。 在 AMW 中,选择主机映射选项卡,分配快照虚拟磁盘和访问快照虚拟磁盘的主机之间的映射。 注: 在某些情况下,将同一主机同时映射至源虚拟磁盘及其关联的快照虚拟磁盘可能会导致冲突。此 冲突取决于主机操作系统以及所有使用中的虚拟磁盘管理器软件。 10. 要在主机操作系统中注册快照虚拟磁盘,请运行基于主机的 hot_add 公用程序。 11.
如果源虚拟磁盘的磁盘组中没有 8 MB 的可用容量,则“创建快照虚拟磁盘”功能默认使用高级路径。请参阅 使用高级路径创建快照虚拟磁盘。 注: 您可以在源磁盘组和另一个磁盘组上同时创建源虚拟磁盘的并发快照。 创建快照虚拟磁盘之前,请注意以下事项: • 以下类型的虚拟磁盘为无效的源虚拟磁盘: – 快照存储库虚拟磁盘 – 快照虚拟磁盘 – 参与虚拟磁盘复制的目标虚拟磁盘 • 如果虚拟磁盘包含无法读取的扇区,则无法创建此虚拟磁盘的快照。 • 必须满足主机操作系统的要求才能创建快照虚拟磁盘。如果未能满足主机操作系统的要求,将导致虚 拟磁盘复制中的源虚拟磁盘或目标虚拟磁盘的快照不准确。 注: 创建新的源虚拟磁盘快照之前,请停止所有数据访问 (I/O) 活动或暂挂向源虚拟磁盘的数据传 输,从而确保捕获准确的源虚拟磁盘快照。关闭所有应用程序(包括 Windows Internet Explorer),确保已停止所有 I/O 活动。 注: 在 Windows 中移除关联虚拟磁盘的驱动器盘符或在 Linux 中卸载虚拟驱动器将有助于确保获得 可靠的快照驱动器副本。 创建快照虚拟磁盘之前,主机服务器必须处于正常状态。要
此时将显示创建快照虚拟磁盘向导 - 简介对话框。 4. 选择高级,然后单击下一步。 5. 此时将显示指定名称窗口。 输入快照虚拟磁盘名称以及快照存储库虚拟磁盘名称,然后单击下一步。 6. 此时将显示分配容量窗口。 在容量分配区域中,选择: – 与基础磁盘相同的磁盘组上的可用容量(推荐) – 不同磁盘组上的可用容量 7. – 未配置的容量(创建新的磁盘组) 以源虚拟磁盘容量百分比的形式输入快照存储库虚拟磁盘容量,然后单击下一步。 8. 此时将显示指定虚拟磁盘参数窗口。 在快照虚拟磁盘参数区域中,选择相关的映射选项,其中包括: – 自动 9. – 稍后以存储分区映射 在快照存储库虚拟磁盘参数区域中,针对以下情况输入相应的系统行为: 10. 单击下一步。 此时将显示包含快照虚拟磁盘摘要的预览窗口。 11. 单击完成。 此时将显示已完成窗口。 12. 单击确定。 13. 在主机映射选项卡中,分配快照虚拟磁盘和访问快照虚拟磁盘的主机之间的映射。 14. 要在主机操作系统中注册快照虚拟磁盘,请运行基于主机的 hot_add 公用程序。 15.
的默认名称会在源虚拟磁盘名称的基础上删减足够的字符,以添加序号字符串。例如,如果源虚拟磁 盘为 Host Software Engineering Group GR-1,则默认快照名称为 Host Software Engineering GR-1,默认快照 存储库名称为 Host Software Engineering GR-R1。 快照存储库容量 如果收到快照存储库虚拟磁盘容量接近其阈值的警告,可以使用以下方法之一增加快照存储库虚拟磁盘的容 量: • 使用快照存储库虚拟磁盘所在磁盘组中的可用容量。 • 向快照存储库虚拟磁盘所在磁盘组中添加未配置容量。当该磁盘组中没有可用容量时使用此选项。 如果快照存储库虚拟磁盘存在以下任何一种情况,无法增加其存储容量: • 虚拟磁盘的一个或多个热备用驱动器处于使用状态。 • 虚拟磁盘未处于“最佳”状态。 • 磁盘组中的任何一个虚拟磁盘处于任一修改状态。 • • 拥有此虚拟磁盘的控制器当前正在向另一个虚拟磁盘添加容量。每个控制器一次只能向一个虚拟磁盘 添加容量。 磁盘组中无可用容量。 • 无未配置的容量可添加至磁盘组。 注: 一次最多可添加两个
注: 添加的物理磁盘的介质类型和接口类型必须与已构成快照存储库虚拟磁盘所在磁盘组的物 理磁盘相同。 8. 单击添加物理磁盘。 9. 选择要添加的一个或两个物理磁盘。 10. 单击添加。 此时将关闭添加物理磁盘窗口。 11. 检查要添加的物理磁盘 [机柜、插槽] 区域,确保已添加正确的物理磁盘。 12. 接受最终容量,也可在增加容量值中输入或选择相应容量。 13.
注: 如果不打算稍后重新创建快照虚拟磁盘,请在对象树中选择快照虚拟磁盘,然后选择虚拟磁盘 → 删除 将其移除。关联的快照存储库虚拟磁盘也会被移除。有关移除快照虚拟磁盘的更多信息,请参阅联机帮 助主题。 注: 即使在禁用快照虚拟磁盘后,SMdevices 公用程序仍会在其输出中显示快照虚拟磁盘。 要禁用快照虚拟磁盘,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡,然后选择复制服务 → 快照虚拟磁盘 → 禁用。 2.
高级功能 - 虚拟磁盘复制 12 注: 虚拟磁盘复制会覆盖目标虚拟磁盘上的数据。开始虚拟磁盘复制之前,请确保不再需要目标虚拟磁盘 上的数据或对其进行备份。 注: 如果订购了此功能,在收到的 Dell PowerVault MD Series 存储阵列包装箱中会看到高级功能激活卡。请 按照卡片上的说明获取密钥文件并启用该功能。 注: 创建虚拟磁盘复制的首选方法是从快照虚拟磁盘复制。如此可使快照操作中使用的原始虚拟磁盘仍然 完全可以接受读/写活动,同时该快照被用作虚拟磁盘复制操作的源。 创建虚拟磁盘复制时,要创建一个复制对,其中的源虚拟磁盘和目标虚拟磁盘位于同一存储阵列上。 源虚拟磁盘是包含您要复制的数据的虚拟磁盘。源虚拟磁盘接受主机 I/O 读取活动并存储数据,直到数据被复 制到目标虚拟磁盘。源虚拟磁盘可以是标准或精简虚拟磁盘。 目标虚拟磁盘是位于磁盘组或磁盘池中的标准或精简虚拟磁盘,如果启用了传统版本,目标虚拟磁盘也可以是 传统快照基本虚拟磁盘。 使用虚拟磁盘复制的原因包括: • 复制数据以改进访问 - 当对某个虚拟磁盘的存储要求更改时,可使用虚拟磁盘复制将数据复制到同一存 储阵列内使用较大容量驱动器的
虚拟磁盘复制的类型 可执行脱机或联机虚拟磁盘复制。为确保数据完整性,在任何一种虚拟磁盘复制操作期间,对目标虚拟磁盘的 所有 I/O 均将暂挂。虚拟磁盘复制完成后,目标虚拟磁盘会自动变为对主机只读。 脱机复制 脱机复制会从源虚拟磁盘读取数据然后将其复制至目标虚拟磁盘,同时在进行复制的过程中,会暂挂对源虚拟 磁盘的所有更新。在脱机虚拟磁盘备份中,复制关系存在于源虚拟磁盘和目标虚拟磁盘之间。参与脱机复制的 源虚拟磁盘可供执行读取请求,同时,虚拟磁盘复制将显示正在进行或挂起状态。仅在脱机复制完成之后才会 允许写入请求。如果源虚拟磁盘格式化为日志文件系统,则任何尝试向源虚拟磁盘发出读取请求的操作均可能 被存储阵列 RAID 控制器模块拒绝,导致显示错误消息。在虚拟磁盘复制完成后,请确保目标虚拟磁盘的“只 读”属性已禁用,从而防止显示错误消息。 联机复制 联机复制将创建存储阵列内任意虚拟磁盘的时间点快照副本,同时在复制进行时仍然允许对虚拟磁盘执行写入 操作。实现方法是,创建虚拟磁盘的快照并使用该快照作为复制的实际源虚拟磁盘。在联机虚拟磁盘复制中, 将在快照虚拟磁盘和目标虚拟磁盘之间建立关系。为其创建时间点映像的虚拟磁
如果决定在虚拟磁盘复制完成后不保留目标虚拟磁盘上的数据,请将目标虚拟磁盘的写保护设置更改为“读/ 写”。 虚拟磁盘复制限制 执行任何虚拟磁盘复制任务之前,请了解并遵守本部分列出的限制。这些限制适用于源虚拟磁盘、目标虚拟磁 盘和存储阵列。 • 虚拟磁盘复制状态为“正在进行”、“挂起”或“失败”时,源虚拟磁盘只能接受读取 I/O 活动。虚拟 磁盘复制完成后,才允许对源虚拟磁盘执行读写 I/O 活动。 • 虚拟磁盘一次仅能用作一个虚拟磁盘复制操作的目标虚拟磁盘。 • 任何虚拟磁盘的虚拟磁盘副本均不能与源虚拟磁盘装载在同一主机上。 • Windows 不允许将驱动器盘符分配给虚拟磁盘副本。 • 状态为“失败”的虚拟磁盘不能用作源虚拟磁盘或目标虚拟磁盘。 • 状态为“降级”的虚拟磁盘不能用作目标虚拟磁盘。 • 使用旧(传统)高级功能版本创建的快照无法使用新快照高级功能选项进行管理。快照组中的虚拟磁 盘不能作为虚拟磁盘复制的目标。 注: 如果您想要选择某个旧(传统)快照虚拟磁盘的基本虚拟磁盘作为目标虚拟磁盘,则必须先禁 用与该基本虚拟磁盘相关联的所有快照(传统)虚拟磁盘。 • 参与修改操作
3. 此时将显示复制管理器窗口。 在表中选择一个或多个复制对。 4.
首选 RAID 控制器模块所有权 在虚拟磁盘复制期间,同一 RAID 控制器模块必须拥有源虚拟磁盘和目标虚拟磁盘。如果虚拟磁盘复制开始 时,这两个虚拟磁盘没有相同的首选 RAID 控制器模块,目标虚拟磁盘的所有权会自动转移给源虚拟磁盘的首 选 RAID 控制器模块。虚拟磁盘复制完成或停止时,目标虚拟磁盘的所有权将还原为自己的首选 RAID 控制器模 块。如果源虚拟磁盘的所有权在虚拟磁盘复制期间更改,则目标虚拟磁盘的所有权也会更改。 RAID 控制器模块故障 必须手动将 RAID 控制器模块所有权更改至备用 RAID 控制器模块,以便在下列任一情况下完成虚拟磁盘复制: • • • 虚拟磁盘复制的状态为“正在进行” 源虚拟磁盘的首选 RAID 控制器模块故障 故障转移时没有自动移交所有权 复制管理器 使用创建复制向导创建虚拟磁盘复制后,可通过复制管理器监测虚拟磁盘复制。在复制管理器中,可以重新开 始、停止或移除虚拟磁盘复制,也可以修改属性,例如复制优先级和目标虚拟磁盘只读属性。在复制管理器中 可查看虚拟磁盘复制的状态。另外,如果要确定虚拟磁盘复制中包含哪些虚拟磁盘,可使用复制管理器或存储 阵列配置文件。
此时将显示确认窗口。 8. 在复制优先级区域中,选择相关的复制优先级,然后键入 yes 进行确认。 9.
停止虚拟磁盘复制 您可以停止处于“正在进行”、“挂起”或“失败”状态的虚拟磁盘复制操作。停止处于“失败”虚拟磁盘复 制能够清除存储阵列所显示的“需要注意”状态。 停止虚拟磁盘复制时,请记住以下重要原则: • 要使用该选项,请在“复制管理器”中仅选择一个复制对。 • 虚拟磁盘复制停止之后,所有映射的主机对源虚拟磁盘拥有写入权限。如果数据被写入源虚拟磁盘, 目标虚拟磁盘上的数据与源虚拟磁盘上的数据则不再匹配。 要停止虚拟磁盘复制,请完成以下步骤: 1. 在 AMW 中,选择存储和复制服务选项卡,然后选择复制服务 → 虚拟磁盘 → 管理复制 。 此时将显示复制管理器窗口。 2. 在表格中选择复制对。 3. 选择复制 → 停止。 4.
重新复制虚拟磁盘 可以使用复制管理器为所选的源虚拟磁盘和目标虚拟磁盘创建全新的虚拟磁盘副本。在已停止虚拟磁盘复制并 要重新开始复制时,或者在虚拟磁盘复制失败或完成时,即可使用此选项。虚拟磁盘复制将重新开始。 重新复制虚拟磁盘时,请记住以下原则: • • 如果主机映射至源虚拟磁盘,则从创建上一个虚拟磁盘副本后,执行重新复制操作时复制到目标虚拟 磁盘的数据可能已更改。 在复制管理器对话框中只选择一个虚拟磁盘副本。 小心: 可能丢失数据 - 重新复制操作会覆盖目标虚拟磁盘上的现有数据。 小心: 可能无法访问数据 - 虚拟磁盘复制状态为“正在进行”或“挂起”时,只能对源虚拟磁盘执行读取 I/O 操作。虚拟磁盘复制完成后,才接受写请求。 要重新复制虚拟磁盘,请执行以下操作: 1. 停止针对源虚拟磁盘和目标虚拟磁盘的所有 I/O 操作。 2. 卸载源虚拟磁盘和目标虚拟磁盘上的所有文件系统。 3. 在 AMW 中,选择复制服务 → 虚拟磁盘复制 → 管理复制 。 此时将显示复制管理器窗口。 4. 在表格中选择复制对。 5. 选择复制 → 重新复制。 此时将显示“重新复制”窗口。 6.
Linux 的 Device Mapper 多路径 13 概述 MD Series 存储阵列使用 Linux 操作系统软件框架(也称为 Device Mapper (DM))来启用 Linux 主机服务器上的 多路径功能。DM 多路径功能由驱动程序和公用程序的组合来提供。本章介绍如何使用这些公用程序来完成在 Linux 系统上启动 MD Series 存储阵列这一过程。 注: 在服务器上运行 MD Series 存储阵列资源 DVD 安装程序,然后选择“完整”或“主机”安装选项,可 将所需的 Device Mapper 软件组件安装在 Linux 主机服务器上。有关详细的安装过程,请参阅 dell.
使用 MD Storage Manager 使用 MD Storage Manager 可执行以下操作: • • • 将主机服务器映射至 MD Series 存储阵列 创建虚拟磁盘 将新创建的阵列映射至主机服务器 注: 配置有 MDCU 的所有阵列都会自动添加到 EMW 中的设备列表中。 Device Mapper 配置步骤 要完成 DM 多路径配置并让存储可用于 Linux 主机服务器,请执行以下操作: 1. 扫描虚拟磁盘。 请参阅扫描新添加的虚拟磁盘。 2. 显示多路径设备拓扑。 请参阅使用多路径命令显示多路径设备拓扑。 3. 在多路径设备节点上创建分区。 请参阅在多路径设备节点上新建 fdisk 分区。 4. 向 DM 添加分区。 请参阅向 Device Mapper 添加新分区。 5. 在 DM 分区上创建文件系统。 请参阅在 Device Mapper 分区上创建文件系统。 6.
robin 0 [prio=6][active] \_ 5:0:0:0 sdc 8:32 [active][ready]\_ round-robin 0 [prio=1][enabled] \_ 4:0:0:0 sdb 8:16 [active][ghost] 其中: mpath1 是 Device Mapper 创建的虚拟设备的名称。它位于 /dev/mapper 目录下。 DELL 是设备供应商。 MD3xxxx 是设备型号。 Sdc 是设备的所属控制器的物理路径。 Sdb 是设备的非所属控制器的物理路径。 以下是 SLES 输出的示例: mpathb(360080e500017b2f80000c6ca4a1d4ab8) dm-21 DELL,MD3xxxx[size=1.
其中, 是分配至多路径设备的字母, 是分区编号。 注: 在具有多路径的设备上创建分区之后,所有 I/O 操作(包括创建文件系统、原始 I/O 和文件系统 I/O) 都必须通过分区节点完成,而不是通过多路径设备节点完成。 在 Device Mapper 分区上创建文件系统 使用标准的 mkfs 命令可在新建的 Device Mapper 分区上创建文件系统。 例如: # mkfs –t /dev/mapper/ 其中 是要在上面创建文件系统的分区。 装载 Device Mapper 分区 使用标准的 mount 命令可装载 Device Mapper 分区,如下所示: # mount /dev/mapper/ 可供使用 MD Series 存储阵列上新创建的虚拟磁盘现已设置并可供使用。以后重新引导时,将自动查找多路径设备及其 分区。 注: 要确保为数据提供完整性保护,请使用下面给出的步骤重新引导连接到 MD Series 存储阵
表.
故障排除 问题 回答 如何检查 multipathd 是否正在运行? 运行以下命令。 /etc/init.d/multipathd status 为什么 multipath –ll 命令的输出未显示 首先验证是否查找到设备。命令 #cat /proc/scsi/scsi 会显示 任何设备? 查找到的所有设备。然后验证 multipath.
配置非对称逻辑单元访问 14 如果 MD Series RAID 存储阵列支持非对称逻辑单元访问 (ALUA),则活动-活动吞吐量允许 RAID 控制器模块将 I/O 请求传递给不属于该控制器的虚拟磁盘。如果没有 ALUA,主机多路径驱动程序需要将以特定虚拟磁盘为目 标的数据请求发送到拥有该磁盘的 RAID 控制器模块。如果控制器模块没有该虚拟磁盘的所有权,则会拒绝请 求。 ALUA 性能注意事项 ALUA 允许具有双控制器(双工)配置的 MD Series 存储阵列通过任一 RAID 控制器模块处理 I/O 请求,但当 RAID 控制器模块访问非其所有的虚拟磁盘时,性能会下降。为维护最佳吞吐量,主机驱动程序会与控制器固 件通信,尽可能将数据请求发送到所属 RAID 控制器。 自动转移所有权 如果前五分钟内超过 75% 的数据 I/O 都路由至非自有 RAID 控制器,则 RAID 控制器固件会自动转移虚拟磁盘所 有权。这表示,存储阵列已丢失冗余连接,或者虚拟磁盘或磁盘组的某些数据路径不可用。如果在默认警报五 分钟延迟到期后,该状况仍然存在,MD Storage Manager 会启动 Recover
其中,array_PID 是存储阵列型号/产品 ID。要为存储阵列选择相应的 array_PID,请参阅下表。 表. 8: 存储阵列和型号/产品 ID (array_PID) 2. 存储阵列 array_PID MD3260 MD32xx MD3260i MD32xxi MD3660i MD36xxi MD3660f MD36xxf 请重新引导基于 ESX 的主机服务器。 在 ESX/ESXi 5.0 中手动添加 SATP 规则 要在 ESX/ESXi 5.0 中手动添加 SATP 规则,请执行以下操作: 1. 运行以下命令:# esxcli storage nmp satp rule add –s VMW_SATP_ALUA –V DELL –M array_PID -c tpgs_on 其中,array_PID 是存储阵列模型/产品 ID。要为您的存储阵列选择相应的 array_PID,请参阅在 ESX 4.1(更 新 1 和更新 2)中手动添加 SATP 规则中的“存储阵列和模型/产品 ID (array_PID)”表。 2.
要在基于 ESX/ESXi 的主机服务器上设置轮询负载平衡策略,请执行以下操作: 1. 请执行以下操作之一: – 对于 ESX 4.x,运行以下命令: # esxcli nmp satp setdefaultpsp –psp VMW_PSP_RR –satp VMW_SATP_ALUA/ VMW_SATP_LSI – 对于 ESX/ESXi 5.x,运行以下命令: # esxcli storage nmp satp set --default-psp VMW_PSP_RR --satp VMW_SATP_ALUA/VMW_SATP_LSI 2.
高级功能 - 远程复制 15 MD 存储阵列支持以下远程复制类型: • 远程复制 - 使用时间点映像的标准异步复制,用于对本地和远程站点之间的重新同步进行批处理。光纤 信道和 iSCSI 存储阵列(非两者之间)都支持这种复制类型。 • 远程复制(传统)- 用于实时同步本地和远程站点数据的同步(或全写)复制。仅在光纤信道存储阵列 上支持这种复制类型。 注: 本章仅介绍标准异步复制高级功能。要了解远程复制(同步)高级功能,请参阅高级功能 - 远程复制 (传统)。 关于异步远程复制 标准远程复制(异步)是一项基于 RAID 控制器的高级功能,在本地和远程存储阵列之间提供基于虚拟磁盘的 数据复制。通过识别主要(本地)和次要(远程)虚拟磁盘对(称为复制对),RAID 控制器固件跟踪针对复 制对的主要虚拟磁盘的写入操作,并捕获在时间点映像中,然后传输到复制对中的次要虚拟磁盘。 使用远程复制组可以管理两个虚拟磁盘的同步,以便在本地和远程存储阵列上创建一致性数据集。主要虚拟磁 盘和次要虚拟磁盘上的时间点映像可以进行批量重新同步,从而增加复制吞吐量。数据同步完成时,系统使用 次要虚拟磁盘上的时间点映像来确保在对次
远程复制功能之间的区别 与(同步)远程复制(传统)功能相比,标准(异步写入)远程复制高级功能使用时间点快照映像来捕获源虚 拟磁盘的状态,并且仅写入自上个时间点映像以来发生更改的数据。 对于标准远程复制,远程存储阵列未与本地存储阵列完全同步。于是,当远程存储阵列突然完全失效时,某些 事务可能会丢失。 对于同步远程复制(传统),写入源虚拟磁盘的所有数据都复制到远程虚拟磁盘。这会产生与生产数据完全相 同的实时远程副本。 其他区别包括: • 需要的存储库虚拟磁盘数 - 标准远程复制需要为每个复制对(远程虚拟磁盘到本地虚拟磁盘)创建一个 存储库虚拟磁盘。而远程复制(传统)只需要一个存储库虚拟磁盘。 • 支持的数据协议 - iSCSI 和光纤信道存储阵列都支持标准远程复制。而远程复制(传统)只在光纤信道 存储阵列上受支持。 • 注: 远程和本地存储阵列必须采用相同的数据协议 - 不支持在光纤信道与 iSCSI 存储阵列之间进行 复制。 距离限制 - 使用标准远程复制高级功能时,本地与远程存储阵列之间的距离不受限制。根据一般的延迟 和应用程序性能要求,远程复制(传统)对于本地与远程存储阵列之间的距离限制约为 10
– 成功建立 iSCSI 连接的第一个端口用于与该远程存储阵列进行所有后续通信。如果该连接随后失 败,则会使用所有可用端口尝试建立新会话。 使用远程复制的限制 • 复制虚拟磁盘之间可能具有不同的 RAID 级别、高速缓存参数和分段大小。 • 次要虚拟磁盘必须至少与主要虚拟磁盘一样大。 • • 在复制关系中只能包含标准虚拟磁盘。不能使用快照(传统)虚拟磁盘、快照虚拟磁盘和精简虚拟磁 盘。 主要虚拟磁盘可以是虚拟磁盘复制中的源虚拟磁盘或目标虚拟磁盘。除非复制完成后启动角色倒转, 否则次要虚拟磁盘不能作为源虚拟磁盘或目标虚拟磁盘。如果在复制正在进行状态期间启动角色倒 转,则复制会失败并且无法重新启动。 • 每个虚拟磁盘只能参与一个复制关系。 • 参与复制请求的虚拟磁盘不能是复制次要虚拟磁盘。 设置远程复制 使用 MD Storage Manager 设置本地和远程存储阵列之间的远程复制时,包含以下步骤: • 在本地和远程存储阵列上激活远程复制高级功能。 • 在本地存储阵列上创建远程复制组 • 向远程复制组添加虚拟磁盘复制对 激活远程复制高级功能 激活远程复制时,会自动将每个 RAI
– 只要复制功能处于活动状态,就会拒绝到该 RAID 控制器模块主机端口的所有通信。 – 如果激活了远程复制(传统)功能,则会创建两个复制存储库。 注: 重复上述步骤以激活远程存储阵列上的远程复制高级功能。 停用远程复制 停用远程复制高级功能会移除 RAID 控制器模块端口限制。 注: 在停用远程复制高级功能之前,请从本地和远程存储阵列中删除所有现有的远程复制组和复制虚拟磁 盘对。 要停用远程复制功能,请执行以下操作: 1. 在 AMW 中,选择备份服务 → 远程复制 → 停用 。 此时将出现一条消息,提示您确认是否要停用远程复制高级功能。 2.
创建远程复制组 注: 创建远程复制组选项仅在本地存储阵列上可用。无法在远程存储阵列上创建远程复制组。 1. 在本地存储阵列的 AMW 中,选择存储和备份服务选项卡。 2. 选择备份服务 → 远程复制 → 远程复制 → 复制组 → 创建 。 此时将显示创建远程复制组窗口。 3. 在远程复制组名称中,输入组名称(最多 30 个字符)。 4. 在选择远程存储阵列下拉列表中,选择远程存储阵列。 注: 如果该远程存储阵列不可用,则无法继续。请验证网络配置或联系网络管理员。 5. 在连接类型下拉列表中,选择数据协议(仅 iSCSI 或光纤信道)。 6. 选择查看同步设置以设置该远程复制组的同步设置。 有关同步设置的更多信息,请参阅联机帮助主题。 7.
创建复制对 此过程介绍如何在现有远程复制组上创建远程复制对。要创建新的远程复制组,请参阅“创建远程复制组”。 1. 在本地存储阵列的 AMW 中,选择存储和备份服务选项卡。 2. 选择备份服务 → 远程复制 → 远程复制 → 复制组 → 创建复制对。 此时将显示选择远程复制组窗口。 注: 如果本地存储阵列不包含远程复制组,则在继续之前,必须在本地存储阵列上创建一个远程复制 组。 3. 选择现有远程复制组,然后单击下一步。 4. 在选择主要虚拟磁盘窗口中,选择以下一项: – 选择本地存储阵列上的现有虚拟磁盘作为复制对中的主要虚拟磁盘,然后单击下一步。转至步骤 4。 – 选择创建新虚拟磁盘的选项,然后单击下一步。请参阅“创建标准虚拟磁盘”。 5. 在选择存储库窗口中,选择要自动或手动创建复制存储库: – 自动 - 选择自动并单击完成以创建具有默认容量设置的复制存储库。 – 手动 - 选择手动并单击下一步以定义复制存储库的属性。然后单击完成。 注: 通常在创建虚拟磁盘对时自动创建复制存储库。建议只有了解物理磁盘冗余和最佳物理磁盘配置 的高级存储管理员才应手动创建存储库。建议采用自动方法。 6.
注: 在偶尔的情况下,当移除过程未能在两个存储阵列上完成时,由主要虚拟磁盘向次要虚拟磁盘发起的 下一次数据同步会暂停。AMW 中的“逻辑”视图也会显示一个无响应的次要虚拟磁盘。移除本地存储阵 列上的复制关系一定能纠正此问题。 1. 在本地存储阵列的 AMW 中,选择存储和复制服务选项卡。 2. 选择包含要移除的复制对的远程复制组,然后选择以下操作之一: – 备份服务 → 远程复制 → 远程复制 → 复制组 → 移除。 – 从右侧窗格中的关联复制对表中,选择要移除的复制对,然后选择备份服务 → 远程复制 → 远程 复制 → 复制对 → 移除。 3.
高级功能 - 远程复制(传统) 16 注: 下节适用于仅限光纤信道的远程复制高级功能。此高级功能被称为“传统”,以便与同时适用于基于 光纤信道和 iSCSI 的 MD 存储阵列的远程复制高级功能相区别。有关信息,请参阅高级功能 - 远程复制。 MD 存储阵列支持以下远程复制类型: • 远程复制 - 使用时间点映像的标准异步复制,用于对本地和远程站点之间的重新同步进行批处理。光纤 信道和 iSCSI 存储阵列(非两者之间)都支持这种复制类型。 • 远程复制(传统)- 用于实时同步本地和远程站点数据的同步(或全写)复制。仅在光纤信道存储阵列 上支持这种复制类型。 注: 本章仅介绍远程复制(传统)高级功能。要了解标准远程复制(异步)高级功能,请参阅高级功能 远程复制。 概述 远程复制(传统)高级功能可实现不同位置的两个光纤信道存储阵列之间的实时数据复制。使用这种类型的远 程复制,最多可以在一个存储阵列上创建 16 个复制虚拟磁盘对。 复制虚拟磁盘对创建自两个标准虚拟磁盘,这两者都是在存储阵列上创建的逻辑数据存储结构。每个标准虚拟 磁盘只能是一个复制对中的成员。一个对由本地存储阵列上的主要虚拟磁盘和远程
• • 为复制保留的光纤信道端口间的通信需要在结构中建立光纤信道交换机分区,具体请参阅需要的交换 机分区配置。 建立虚拟磁盘复制对之前,必须在每个参与复制的存储阵列上激活远程复制高级(传统)功能。 复制存储库虚拟磁盘 使用存储阵列上的远程复制(传统)高级功能要求在存储阵列的一个磁盘组上创建两个复制存储库虚拟磁盘。 RAID 控制器模块将在这些虚拟磁盘上存储复制信息,包括有关残缺的远程写入的信息,该远程写入可用于从 RAID 控制器模块重置和意外的存储阵列停机中恢复数据。 有关复制存储库虚拟磁盘的其他信息包括: • 指定从磁盘组的未配置可用容量中创建复制存储库虚拟磁盘,或从存储阵列上的未配置可用容量中创 建新磁盘组及其成员复制存储库虚拟磁盘。 注: 在不禁用“远程复制”高级功能的情况下,无法删除包含复制存储库虚拟磁盘的磁盘组。 • 复制存储库虚拟磁盘的默认名称是复制存储库 1 和复制存储库 2。这些名称无法更改。 • 激活流程能够创建具有相同容量的复制存储库虚拟磁盘。在双 RAID 控制器模块存储阵列中,每个复制 存储库虚拟磁盘的默认容量是每个控制器 128 MB(在 RAID 组中总计 256
快照虚拟磁盘和虚拟磁盘复制是必须在主要存储阵列上启用和激活的高级功能。 存储分区和远程复制(传统) 利用存储分区,主机能够共享对存储阵列中虚拟磁盘的访问权限。定义主机集合(主机组)或单个主机时将创 建存储分区,然后将定义虚拟磁盘到逻辑单元号 (LUN) 的映射。通过此映射,您可以定义哪个主机或主机组有 权访问存储阵列中的特定虚拟磁盘。 本地存储阵列和远程存储阵列的存储分区定义各自独立。在次要角色的磁盘服务上创建相似的定义能够减少站 点恢复过程中所需的管理工作。 快照虚拟磁盘和远程复制(传统) 快照虚拟磁盘是虚拟磁盘的时间点映像。在远程复制中,请勿在相同的服务器上装载快照虚拟磁盘作为主要虚 拟磁盘。 虚拟磁盘复制和远程复制(传统) 虚拟磁盘复制高级功能将源虚拟磁盘上的数据复制到相同存储阵列上的目标虚拟磁盘。 远程复制中的主要虚拟磁盘在虚拟磁盘复制中可以是源虚拟磁盘,也可以是目标虚拟磁盘。 可以在复制对中的主要虚拟磁盘上创建虚拟磁盘复制,但不能对复制对中次要虚拟磁盘创建虚拟磁盘复制。要 复制次要虚拟磁盘,请使用以下两种方法之一: • 将次要虚拟磁盘升级至主要虚拟磁盘。 小心: 如果在虚拟磁盘复制进行时转换
远程复制(传统)的分区原则 在存储阵列上启用远程复制将自动根据 RAID 控制器指定一个复制专用端口。这些专用端口(RAID 控制器 0 上 的端口 3 和 RAID 控制器 1 上的端口 3)必须位于光纤信道交换机上的不同分区。一般而言,交换机分区应按如 下原则建立: • 所有 RAID 控制器 0 光纤信道端口 3 都在公共分区内。 • 所有 RAID 控制器 1 光纤信道端口 3 都在公共分区内,但 RAID 控制器 0 端口位于不同的分区内。 • 主机光纤信道访问端口与用于远程复制的端口处于不同的分区。 交换机级联 当两个或更多光纤信道交换机级联时,交换机管理软件将合并链接的所有交换机的端口。 日志文件系统和远程复制(传统) 使用日志文件系统时,将无法获取远程虚拟磁盘的只读访问权限。日志文件系统不允许在 Windows NTFS 中装 载远程虚拟磁盘。但是,您可以装载远程虚拟磁盘的快照(如果可用)。 设置和管理远程复制(传统)的前提条件 在两个存储阵列间设置远程复制之前,请确保: • 远程复制高级功能已激活。 • 本地存储阵列包含两个复制存储库虚拟磁盘(激活时创建)。 • 本
1. 从 AMW 中选择复制服务 → 远程复制 → 激活 。 2. 在“激活远程复制”向导中,选择未配置的容量(创建新的磁盘组),然后单击下一步。 此时将显示激活远程复制 - 创建磁盘组向导。 3. 在磁盘组名称中,为磁盘组键入唯一的名称。 4. 选择以下一项以选择物理磁盘: – 自动 - Storage Manager 为每个可用的 RAID 级别生成可用容量和物理磁盘选项的列表。 – 手动 - Storage Manager 生成未选物理磁盘的列表。 5. 单击下一步。 – 如果选择自动,将显示选择容量空表和可用 RAID 级别的下拉列表。转到步骤 5。 6. – 如果选择手动,将显示已填写的未选物理磁盘表、已选物理磁盘空表和可用 RAID 级别的下拉列 表。 在选择 RAID 级别下拉列表中,为磁盘组选择 RAID 级别。选择容量表将显示 RAID 级别的可用虚拟磁盘。 7. 在选择容量表中,选择物理磁盘和新磁盘组的容量,然后单击下一步。 此时将显示预览(激活远程复制)向导。 8.
此时将显示选择存储阵列(创建远程复制(传统))对话框。存储阵列列表将显示远程存储阵列。 7. 选择在其中创建了次要虚拟磁盘的存储阵列。然后单击下一步。 此时将显示选择次要虚拟磁盘(创建远程复制(传统))向导。转至“选择次要虚拟磁盘”。 选择次要虚拟磁盘 小心: 创建复制虚拟磁盘对将在主要和次要虚拟磁盘之间启动一个过程,该过程将覆盖次要虚拟磁盘上的 所有现有数据并将磁盘设置为只读访问。如果次要虚拟磁盘上存在数据,请停止对该磁盘的所有 I/O 操 作、备份数据、卸载次要虚拟磁盘上装载的任何文件系统,然后再创建复制虚拟磁盘对。 1. 选择远程存储阵列和主要虚拟磁盘。 2. 在选择次要虚拟磁盘(创建远程复制(传统))向导中,选择次要虚拟磁盘。 3.
3. – 手动重新同步(推荐)- 每当未同步的复制虚拟磁盘间的通信还原时,必须手动重新同步复制对。 单击下一步。 此时将显示预览(创建远程复制(传统))向导。转至完成远程复制。 完成远程复制(传统) 小心: 创建复制虚拟磁盘对将在主要和次要虚拟磁盘之间启动一个过程,该过程将覆盖次要虚拟磁盘上的 所有现有数据并将磁盘设置为只读访问。如果次要虚拟磁盘上存在数据,请:(1) 停止对该磁盘的所有 I/O 操作,(2) 备份数据,(3) 卸载次要虚拟磁盘上装载的任何文件系统,然后再创建复制虚拟磁盘对。 选择同步设置后,执行以下步骤完成远程复制: 1. 在预览(创建远程复制(传统))向导中,键入 Yes 确认同步,然后单击完成。 此时将显示以下确认消息: Creation Successful (Create Remote Replication) 2.
查看有关远程复制(传统)或复制存储库(传统)虚拟磁盘的 信息 在 MD Storage Manager 中,“存储阵列配置文件”和“属性”面板显示有关远程复制的物理和逻辑特征的信 息。 查看存储阵列配置文件 存储阵列配置文件显示有关远程复制和复制存储库虚拟磁盘组件的最详细信息。可以执行以下操作: • 查看有关远程复制中单独的和配对的虚拟磁盘的详细信息 • 查看有关远程复制和存储阵列中复制存储库虚拟磁盘的详细信息 • 将存储阵列配置文件信息保存为文本文件 要查看存储阵列配置文件,请执行以下操作: 1. 2. 在本地或远程存储阵列的 AMW 中,选择摘要选项卡。 在监测区域中,单击查看存储阵列配置文件。 此时将显示存储阵列配置文件窗口。 3. 在存储选项卡下,选择虚拟磁盘选项卡。 4. 选择复制选项卡或存储库选项卡。 此时将显示“存储阵列配置文件”页。 5. 请执行以下操作之一: – 要返回 AMW 而不保存信息,请单击关闭。 – 要保存信息,请单击另存为,然后转至步骤 6。 6. 在保存配置文件窗口的部分选择区域中,选择要保存的每个部分。 7.
1. 在本地存储阵列的 AMW 中,选择存储和复制服务选项卡。 2. 右键单击远程复制的次要虚拟磁盘。 3. 选择查看关联的逻辑元素。 此时将显示查看关联的逻辑元素弹出框,其中显示以下逻辑元素: – 主要和次要虚拟磁盘及其位置 – 复制存储库虚拟磁盘及其位置 查看主要虚拟磁盘的物理组件或逻辑元素 要查看远程复制中主要虚拟磁盘的物理组件或逻辑元素,请执行以下操作: 1. 在包含主要虚拟磁盘的存储阵列的 AMW 中,选择存储和复制服务选项卡。 2.
更改写模式和一致性组成员资格 如果已创建远程复制的写模式,将选择该模式。但是,稍后可以在远程复制中更改写模式,也可以在写一致性 组中更改次要虚拟磁盘的成员资格。有关写模式和写一致性组的更多信息,请参阅联机帮助主题。 要更改写模式和一致性组成员资格,请执行以下操作: 1. 在包含主要虚拟磁盘的存储阵列 AMW 中,选择存储和复制服务选项卡。 2. 在对象树中,右键单击复制对的主要虚拟磁盘。 3. 选择更改 → 写模式。 4. 此时将显示更改写模式对话框。复制对表格将显示本地和远程存储阵列中的所有复制对。 选择一个或多个复制对。要选择所有复制对,请单击全选。 5. 选择同步或异步写模式。 6. 如果正在将复制对的次要虚拟磁盘添加至写一致性组,请选择是,然后选择添加至一致性组。如果未将复 制对的次要虚拟磁盘添加至写一致性组,转到步骤 7。 7. 单击“确定”。 此时将显示更改写模式窗口。 在更改写模式窗口中,单击是。 8.
• 存储阵列上的 RAID 控制器模块所有者将有关写操作的信息记录到存储阵列的复制存储库虚拟磁盘中。 • RAID 控制器模块所有者将数据写入主要虚拟磁盘。 • RAID 控制器模块所有者启动数据传输操作,将数据传输至次要存储阵列上的次要虚拟磁盘。 主要和次要虚拟磁盘间的通信可能会暂挂或不同步。如果主要虚拟磁盘和次要虚拟磁盘间的通信中断: • 复制对的状态将更改为“未同步”。 • 存储阵列将显示“需要注意”状态。 • 数据将写入主要虚拟磁盘。 • 对主要虚拟磁盘的写入请求将被记录下来。 • RAID 控制器模块所有者将 I/O 完成消息发送到发送写请求的主机。虽然主机可以继续向主要虚拟磁盘发 送写请求,但不会发生向次要虚拟磁盘传输数据的情况。对次要虚拟磁盘的写入将被暂挂,直到主要 虚拟磁盘和次要虚拟磁盘间的通信还原。 主要虚拟磁盘和次要虚拟磁盘间的连接还原后,复制对即可进行重新同步。 注: 主要虚拟磁盘和次要虚拟磁盘重新同步后,只向次要虚拟磁盘传输通信中断后主要虚拟磁盘上更改的 数据。 小心: 如果主要存储阵列和次要存储阵列间开始重新同步后通信中断,应注意可能会丢失数据。次要虚
此时将显示更改同步优先级 - 进度条,指示重新同步的进度。 8.
小心: 如果在虚拟磁盘复制进行时转换次要虚拟磁盘和主要虚拟磁盘的角色,则可能导致数据访问权限丢 失。角色转换可能会成功,但虚拟磁盘复制会失败,而且不能重新启动。 • 不能在虚拟磁盘远程复制中的次要虚拟磁盘上执行虚拟磁盘复制。要为次要虚拟磁盘创建虚拟磁盘复 制,必须转换次要虚拟磁盘和主要虚拟磁盘的角色,然后在新的主要虚拟磁盘上执行虚拟磁盘复制。 • 当虚拟磁盘远程复制正在同步时,不能在主要或次要虚拟磁盘上执行虚拟磁盘复制。 • 如果在转换角色时,次要虚拟磁盘的容量比主要虚拟磁盘少,则角色转换会成功,但新的主要虚拟磁 盘的可用容量与次要虚拟磁盘的总容量相等。 升级次要虚拟磁盘或降级主要虚拟磁盘 要将次要虚拟磁盘升级为主要虚拟磁盘的角色,或将主要虚拟磁盘降级为次要虚拟磁盘的角色,请执行以下操 作: 1. 在包含要更改的虚拟磁盘的存储阵列 AMW 中,单击存储和复制服务选项卡。 2.
关于恢复的远程复制 暂挂远程虚拟磁盘复制时,数据将继续写入主要虚拟磁盘,但不会复制到次要虚拟磁盘。向主要虚拟磁盘的写 入将持久记录至复制存储库虚拟磁盘。 通信还原后,主要虚拟磁盘和次要虚拟磁盘间的数据传输必须重新同步。 根据所指定的重新同步方法,将出现以下情况: • 自动重新同步 - 虚拟磁盘重新同步之后,立即自动启动数据传输。 • 手动重新同步 - 必须手动恢复远程虚拟磁盘复制才能重新启动数据传输。手动恢复之前,暂挂的远程虚 拟磁盘复制将一直处于“暂挂”状态。 远程虚拟磁盘复制恢复之后,数据将自动写入次要虚拟磁盘。只有复制对暂挂后更改的主要虚拟磁盘区域会写 入次要虚拟磁盘。 小心: 可能无法访问数据:当您恢复与作为写一致性组成员的主要或次要虚拟磁盘相关的远程虚拟磁盘复 制时,也会恢复写一致性组中复制对所有其他暂挂的远程复制。 注: 如果写模式为同步状态,恢复远程虚拟磁盘复制之后,无需重新同步主要和次要虚拟磁盘。 测试主要和次要虚拟磁盘间的通信 手动重新同步或灾难恢复期间,可能需要测试远程复制中主要虚拟磁盘和次要虚拟磁盘间的通信。有关远程虚 拟磁盘复制中的同步和重新同步的更多信息,请转至以下主题:
从远程虚拟磁盘复制删除主要虚拟磁盘后,会发生以下事件: • 主要虚拟磁盘从存储阵列中删除。 注: 虚拟磁盘从存储阵列中永久性删除,主要虚拟磁盘上的所有数据永久性丢失。 • 复制关系中断。 • 删除的虚拟磁盘容量成为存储阵列的未配置可用容量,并且可用来创建新的虚拟磁盘。 • 次要虚拟磁盘成为常规的标准虚拟磁盘,能够接受读取和写入。 删除次要虚拟磁盘 小心: 删除次要虚拟磁盘将导致次要虚拟磁盘上的数据永久丢失。 注: 根据存储阵列上启用的高级功能,删除次要虚拟磁盘可能删除所有关联的虚拟磁盘,进而可能导致这 些虚拟磁盘上的数据丢失。 注: 次要虚拟磁盘正在同步时,无法将其删除。 如果删除次要虚拟磁盘,将移除复制关系、破坏远程虚拟磁盘复制。有关介绍如何删除次要虚拟磁盘的步骤, 请参阅从存储阵列的复制对中删除虚拟磁盘。 从存储阵列中删除复制对中的主要虚拟磁盘 1. 停止对主要虚拟磁盘的所有 I/O 活动,并卸载主要虚拟磁盘上的所有文件系统。 2. 在包含主要虚拟磁盘的存储阵列的 AMW 中,选择存储和复制服务选项卡。 3.
从存储阵列中移除远程复制 从存储阵列中移除远程虚拟磁盘复制会将主要虚拟磁盘和次要虚拟磁盘都恢复为常规标准虚拟磁盘。移除完成 后,之前主要虚拟磁盘上的正常 I/O 操作将继续进行,之前次要虚拟磁盘也会供正常 I/O 操作使用。两种虚拟 磁盘都会启用可读写权限。除非删除某一磁盘,否则仍可重新创建两种虚拟磁盘之间的复制关系。 小心: 请勿通过移除复制关系来备份复制的虚拟磁盘。要备份主要虚拟磁盘或次要虚拟磁盘,请暂挂远程 虚拟磁盘复制,以免破坏复制关系。 注: 两种虚拟磁盘上的数据均不会删除。 要从存储阵列移除远程复制,请执行以下操作: 1. 在包含主要虚拟磁盘的存储阵列的 AMW 中,选择存储和复制服务选项卡。 2. 在“逻辑”窗格中,右键单击复制对的主要虚拟磁盘,然后选择移除复制关系。 此时将显示移除复制关系对话框。复制对表将显示本地存储阵列和远程存储阵列中的所有复制对。 3. 请执行以下操作之一: – 要移除复制关系,请选择一个或多个复制对。 – 要选择所有复制对,请单击全选。 4. 单击移除。 此时将显示移除复制关系 - 确认对话框。 5.
管理固件下载 17 下载 RAID 控制器和 NVSRAM 软件包 每个固件文件都存在版本号。版本号表明该固件是主要版本还是次要版本。可以使用企业管理窗口 (EMW) 下 载和激活主要固件版本和次要固件版本。也可使用阵列管理窗口 (AMW) 仅下载和激活次要固件版本。 注: 固件版本的格式为 aa.bb.cc.dd。其中 aa 是主要固件版本。bb.cc.
请记住以下原则: – 如果传输按钮未处于活动状态,请确保选择一个 NVSRAM 文件,或者清除传输带有 RAID 控制器模 块固件的 NVSRAM 文件复选框。 8. – 如果所选文件无效或与当前存储阵列配置不兼容,将显示文件选择错误对话框。单击确定将其关 闭,然后选择兼容固件或 NVSRAM 文件。 在确认下载对话框中,单击是。 9. 下载开始。 如果使用的是 EMW,请执行以下操作之一: – 选择工具 → 升级 RAID 控制器模块固件。 – 选择设置选项卡,然后单击升级 RAID 控制器模块固件。 10. 在存储阵列窗格中,选择要升级 RAID 控制器模块固件或 NVSRAM 的存储阵列。 可以选择多个存储阵列。 注: “详细信息”窗格每次只显示一个存储阵列的详细信息。如果在“存储阵列”窗格中选择了多个 存储阵列,则“详细信息”窗格中不会显示这些存储阵列的详细信息。 11.
或 选择支持选项卡,并单击下载固件。在选择下载任务中,选择下载 RAID 控制器模块 NVSRAM 并单击确 定。将显示错误消息。单击确定将其关闭,并选择兼容的文件。 3. 要定位下载文件所在的目录,请单击选择文件。 4. 在“文件选择”区域中选择要下载的文件,然后单击确定。 默认情况下,仅显示与当前存储阵列配置兼容的可下载文件。 在“文件选择”区域中选择文件时,该文件的适用属性(如果有)会显示在“NVSRAM 文件信息”区域 内。属性会指明该 NVSRAM 文件的版本。 5. 单击传输。 注: 如果选择的文件无效或与当前存储阵列配置不兼容,则会显示文件选择错误对话框。单击确定将 其关闭,并选择兼容的 NVSRAM 文件。 6. 在确认下载对话框中单击“是”。 下载开始。 7. 请执行以下操作之一: – 选择工具 → 升级 RAID 控制器模块固件。 – 选择设置选项卡,然后单击升级 RAID 控制器模块固件。 此时将显示升级 RAID 控制器模块固件窗口。 “存储阵列”窗格将列出存储阵列。“详细信息”窗格则显示在“存储阵列”窗格中选择的存储阵列的详 细信息。 8.
物理磁盘固件控制着物理磁盘的各种功能。磁盘阵列控制器 (DAC) 使用这种类型的固件。物理磁盘固件在一个 名为 DACstore 的物理磁盘区域中存储关于系统配置的信息。DACstore 和物理磁盘固件可更简单地实现物理磁 盘的重新配置和迁移。物理磁盘固件执行以下功能: • 物理磁盘固件记录物理磁盘在扩展机柜中的位置。如果将物理磁盘从扩展机柜中移出,必须将其重新 插入相同的物理磁盘插槽,否则物理磁盘固件无法与 RAID 控制器模块或其他存储阵列组件通信。 • RAID 配置信息存储在物理磁盘固件中,并用于与其他 RAID 组件进行通信。 小心: 存在应用程序出错的风险 - 下载此固件可能会导致应用程序出错。 下载固件时,请记住以下重要原则,以避免发生应用程序出错的风险: • 错误下载固件可能导致物理磁盘损坏或数据丢失。仅在技术支持代表的指导下执行下载。 • 先停止对存储阵列的所有 I/O 操作,然后再执行下载。 • 确保要下载到物理磁盘的固件与选择的物理磁盘兼容。 • 下载固件时,请勿对存储阵列的配置进行任何更改。 注: 完成下载可能需要几分钟时间。下载期间,将显示下载物理磁盘 - 进
1. 在 AMW 中,选择升级 → EMM 固件。 此时将显示“下载环境参数 (EMM) 卡固件”对话框。 2. 在选择机柜区域中,选择要下载固件的每个扩展机柜,或选择“全选”以选择存储阵列中的所有扩展机 柜。 每个所选扩展机柜的产品 ID 必须相同。 3. 单击选择文件以选择 EMM 固件文件。 此时将显示选择环境参数 (EMM) 卡固件文件对话框。 4. 选择要下载的文件并单击确定。 5. 单击开始。 6. 单击是继续下载固件。 7. 注: 如果在固件下载过程中单击停止,则进行中的下载将在操作停止前完成。其余扩展机柜的状态将 更改为已取消。 监测下载到扩展机柜的进度和完成状态。参与下载的每个扩展机柜的进度和状态将显示在“选择机柜”表 格的“状态”列中。 注: 每个固件可能需要几分钟才能完成下载。 8.
固件资源清册 18 存储阵列由许多组件组成,其中可包括 RAID 控制器模块、物理磁盘和机柜管理模块 (EMM)。其中每个组件都 包含固件。某些版本的固件依赖于固件的其他版本。要捕获关于存储阵列中所有固件版本的信息,请查看固件 资源清册。 如果固件资源清册不含特定存储阵列的信息,则固件资源清册服务在该存储阵列上不可用。 还可以将固件资源清册保存至文本文件。然后可将该文件发送给技术支持代表进行分析。技术支持代表可检测 到任何固件不匹配问题。 查看固件资源清册 1. 根据您要查看一个存储阵列还是所有存储阵列的固件信息,执行以下操作之一: – 一个存储阵列 - 在 AMW 中,选择摘要 → 查看固件资源清册 。 2. – 所有存储阵列 - 在 EMW 中,选择工具 → 固件资源清册 。 要将固件资源清册另存为文本文件,请单击另存为。 注: 如果未指定文件名的后缀,则会自动为该文件名添加后缀 *.txt。 3. 4.
系统接口 19 虚拟磁盘服务 Microsoft 虚拟磁盘服务 (VDS) 是 Windows 操作系统的一个组件。VDS 组件利用第三方供应商特定的软件模块 (称为提供程序)来访问和配置第三方存储资源,例如,MD Series 存储阵列。VDS 组件公开了一组应用程序 编程接口 (API),提供用于管理磁盘和其他存储硬件的单一接口。MD Series VDS 提供程序允许使用 Windows 工 具(包括磁盘管理器)来访问和配置存储阵列虚拟磁盘。 适用于 MD Series 存储阵列的 VDS 提供程序在 MD Series 资源 DVD 中提供。有关 VDS 的更多信息,请参阅 microsoft.
20 存储阵列软件 启动例行程序 在阵列的启动例行程序运行期间,请观察并倾听下表中说明的现象。有关前面板指示灯和背面板指示灯的说 明,请参阅关于存储阵列。 观察/倾听 操作 警报消息 请参阅存储管理说明文件。 访问物理磁盘时听 到的异常、持续的 刮擦声或摩擦声。 请参阅获取帮助。 设备运行状况 打开企业管理窗口 (EMW) 时,Dell PowerVault Modular Disk Storage Manager (MD Storage Manager) 会与每个托 管存储阵列建立通信并确定当前存储阵列状态。托管存储阵列旁的图标代表当前状态。 EMW 树视图中显示的状态图标代表每个存储阵列的摘要状态。如果存储阵列的状态为“需要注意”或“正在 修复”,请确定导致此状态的情况,然后再尝试任何管理操作。要确定导致“需要注意”或“正在修复”状态 的情况,可选择存储阵列,然后启动其阵列管理窗口 (AMW)。 AMW 打开后,选择硬件选项卡以查看存储阵列中的组件。有问题的组件由状态图标指示。 状态图标指示组成存储阵列的组件的状态。另外,“Recovery Guru”选项详细说明了这些状况和纠正“需要注
状态 图标 说明 存储阵列正在运行 MD Storage Manager 不再支持的软件级 别。 软件不受支持 在表视图中,每个托管存储阵列只列出一次,而不管其在树视图中有多少附件。存储阵列与 MD Storage Manager 建立联系后,将显示代表其硬件状态的图标。硬件状态可以是“最佳”、“需要注意”或“正在修 复”。但是,如果树视图中显示的从存储管理站到存储阵列的所有网络管理连接均为“无响应”状态,则存储 阵列状态表示为“无响应”。 在 EMW 状态栏和 AMW 状态栏中,图标还存在以下行为: • 将鼠标悬停在 EMW 状态栏和 AMW 状态栏中的图标上会显示工具提示,其中包含该状态的简要说明。 • 如果发现存在状态为“需要注意”或“无响应”的存储阵列,则 EMW 状态栏和 AMW 状态栏中将显示 相应的图标。 EMW 树视图中还包含下表中所示的附加状态图标。 表.
状态 图标 说明 要注意”、“正在修复”或“无响 应”。 添加存储阵列成功 添加存储阵列时没有遇到问题。 MD Storage Manager 将继续检查是 否存在状态更改事件。 添加存储阵列时出错 仅当发生错误时显示。 在树视图中,图标可显示在字符串中,以传达更多信息。例如,以下字符串表示,存储阵列处于“最佳”状 态,已为存储阵列设置警报,而且固件可供下载。 注: MD Storage Manager 可能需要几分钟时间来更新如下状态更改 - 更改为“无响应”或从“无响应”更 改为其他状态。这种更改取决于与存储阵列间的网络连接。其他所有状态更改的更新速度较快。 跟踪缓冲区 可将跟踪信息保存到一个压缩文件中。固件使用跟踪缓冲区来记录可能有助于调试的处理活动,包括异常情 况。跟踪信息存储在当前缓冲区中,此类信息经过检索后可移至已刷新的缓冲区。由于每个 RAID 控制器模块 都有自己的缓冲区,因此可能有多个已刷新的缓冲区。跟踪缓冲区可以在不中断存储阵列运行的情况下进行检 索,而且对性能产生的影响极小。 注: 请仅在技术支持代表的指导下使用该选项。 ZIP 压缩存档文件存储在您在主机上指定的位置。该
注: 如果在步骤 3 中选择了已刷新的缓冲区选项,则检索后将当前跟踪缓冲区移至已刷新的缓冲区不 可用。 5. 在指定文件名中为物理磁盘数据文件名输入名称,或者单击浏览导航至以前保存的文件以覆盖现有文件。 6. 单击开始。 跟踪缓冲区信息将存档到指定文件中。 7. 在检索过程结束后: – 要使用不同参数再次检索跟踪缓冲区,请重复步骤 2 到步骤 6。 – 要关闭该对话框,请单击关闭。 收集物理磁盘数据 可使用收集物理磁盘数据选项从存储阵列上的所有物理磁盘收集日志感测数据。日志感测数据包含存储阵列中 每个虚拟磁盘所维护的统计信息。技术支持代表可使用此信息分析物理磁盘的性能和解决可能存在的问题。 警告: 仅在技术支持代表的指导下使用该选项。 要收集物理磁盘数据,请执行以下操作: 1. 在 AMW 中,执行以下操作之一: – 要从存储阵列中的所有虚拟磁盘收集数据,请选择监测 → 运行状况 → 收集物理磁盘数据 → 所有 物理磁盘。 – 要从硬件选项卡中所选的单个物理磁盘收集数据,请选择监测 → 运行状况 → 收集物理磁盘数据 → 所选的物理磁盘。 此时将显示收集物理磁盘数据窗口。 2.
暂挂或恢复支持数据收集计划 暂挂支持数据收集计划会暂时禁用计划的操作。暂挂支持数据收集计划时,计划的计时器会继续运行,但计划 的支持数据收集不会发生。暂挂计划不会影响重大事件日志 (MEL) 中的事件发生时对支持数据的自动收集。 恢复计划会在计划的基础上重新开始收集支持数据。随时可以恢复暂挂的计划。 1. 在 EMW 中,选择工具 → 收集支持数据 → 创建/编辑计划。 此时将显示计划支持数据收集对话框。 2. 在存储阵列表中,选择一个或多个存储阵列。 3. 请执行以下操作之一: – 要暂挂支持数据收集计划,请单击暂挂,然后单击是。 – 要重新启动支持数据收集计划,请单击恢复,然后单击确定。 4. 单击确定。 移除支持数据收集计划 要移除支持数据收集计划,请执行以下操作: 1. 在 EMW 中,选择工具 → 收集支持数据 → 创建/编辑计划。 此时将显示计划支持数据收集对话框。 2. 在存储阵列表中,选择一个或多个存储阵列。 3. 单击移除。 4. 查看信息,然后单击是。 此时将显示计划支持数据收集对话框。 5.
查看事件日志 警告: 仅在技术支持代表的指导下使用该选项。 要查看事件日志,请执行以下操作: 1. 在 AMW 中,选择监测 → 报告 → 事件日志 。 此时将显示“事件日志”。默认情况下,将显示摘要视图。 2. 要查看每个所选日志条目的详细信息,请选择查看详细信息。 3. 事件日志中将添加一个详细信息窗格,其中包含关于日志项的详细信息。一次只能查看有关一个日志条目 的详细信息。 要保存事件日志,请单击另存为。 此时将显示保存事件对话框,请导航至相关文件夹,输入相关文件名,然后单击保存。 4. 要从事件日志中删除所有日志条目,请单击全部清除。 5.
– 保存存储阵列配置文件 - 请转到步骤 5。 – 关闭存储阵列配置文件 - 请转到步骤 6。 3. 选择其中某个选项卡,并使用水平滚动条和垂直滚动条查看存储阵列配置文件信息。 注: 可以使用此过程中的其他步骤搜索存储阵列配置文件、保存存储阵列配置文件或关闭存储阵列配 置文件。 4. 要搜索存储阵列配置文件,请执行以下步骤: a) 单击 。 b) 在查找文本框中键入要搜索的术语。 如果该术语位于当前选项卡中,则存储阵列配置文件信息中将高亮显示它。 注: 搜索仅限于当前选项卡。如果要在其他选项卡中搜索该术语,请选择该选项卡,然后再次单 击查找按钮。 c) 再次单击查找按钮以搜索出现术语的附加位置。 5. 要保存存储阵列配置文件,请执行以下步骤: a) 单击另存为。 b) 要保存存储阵列配置文件的所有部分,请选择所有部分。 c) 要保存存储阵列配置文件的特定部分的信息,请选择选择部分,并选择对应于要保存的部分的复选 框。 d) 选择相应的目录。 e) 在文件名中,键入选择的文件名。要将该文件与打开它的特定软件应用程序关联起来,请指定文件扩 展名,例如 .
3. 请确保已安装 RAID 控制器模块且存储阵列电源供给正常。 4. 如果存储阵列有问题,则需要进行纠正。 5. 根据存储阵列的托管方式执行以下操作之一: – 带外托管存储阵列 - 转至步骤 6。 – 带内托管存储阵列 - 转至步骤 12。 6. 对于带外托管存储阵列,使用 ping 命令确保可到达 RAID 控制器模块,从而确保可通过网络访问 RAID 控 制器模块。键入以下命令之一,然后按 。 – ping – ping 7. 如果验证成功,请参阅步骤 8;否则,请参阅步骤 9。 8. 在 EMW 中移除处于无响应状态的存储阵列,然后选择添加存储阵列以再次添加该存储阵列。 9. 如果存储阵列没有恢复“最佳”状态,请检查以太网电缆以确保没有明显的损坏且连接稳固。 10. 确保已执行相应的网络配置任务。例如,确保 IP 地址已分配给每个 RAID 控制器模块。 11. 如果存在电缆或网络可访问性问题,请参阅步骤 20;否则,请参阅步骤 12。 12.
定位物理磁盘 通过激活物理磁盘 LED,可以物理定位并识别扩展机柜中的一个或多个物理磁盘。 要定位物理磁盘,请执行以下操作: 1. 选择硬件选项卡。 2. 选择要定位的物理磁盘。 3. 选择硬件 → 闪烁 → 物理磁盘 。 所选物理磁盘上的 LED 将闪烁。 4. 定位到物理磁盘后,单击确定。 LED 将停止闪烁。如果当前正在从另一个存储管理站调用其他闪烁操作(闪烁磁盘组、闪烁存储阵列、闪 烁物理磁盘端口或闪烁扩展机柜),这些 LED 也会停止闪烁。 5. 在极少数情况下,物理磁盘上的 LED 无法停止闪烁,此时可以在 AMW 中选择硬件 → 闪烁 → 停止所有指 示。 如果 LED 成功停止闪烁,将显示确认消息。 6.
1. 在 AMW 中,选择监测 → 运行状况 → 捕获状态信息 。 2. 阅读确认状态捕获对话框中的信息,并键入 yes 继续。 3. 在指定文件名文本框中,输入要保存的文件的名称;如果要覆盖现有文件,也可以浏览到以前保存的文 件。 使用惯例 filename.dmp 命名文件。如果不指定文件后缀,系统会自动给文件添加后缀 .dmp。 4. 单击开始。 注: 每次测试正在进行时,将显示“正在执行”状态。测试成功完成时,将显示“已完成”。如果任 何测试无法完成,“执行摘要”窗口中将显示“失败”状态。 5.
从未识别的存储阵列中恢复 要从未识别的存储阵列中恢复,请执行以下操作: 1. 确保与存储管理站之间的网络连接有效。 2. 确保控制器已安装并且存储阵列已接通电源。请纠正现存的任何问题,然后继续。 3.
在 Windows 中启动 SMagent 软件 1. 请执行以下操作之一: – 单击开始 → 设置 → 控制面板 → 管理工具 → 服务 2. – 单击开始 → 管理工具 → 服务 在服务对话框中,选择 Modular Disk Storage Manager Agent。 3. 如果 Modular Disk Storage Manager Agent 正在运行,请单击操作 → 停止,然后等待约 5 秒钟。 4. 单击操作 → 开始。 在 Linux 中启动 SMagent 软件 要在 Linux 中启动或重新启动 Host Context Agent 软件,请在提示符下输入以下命令: SMagent start SMagent 软件可能需要一点时间进行初始化。光标已显示,但终端窗口不响应。该程序启动时,将显示以下消 息: SMagent started. 当程序完成启动过程后,将显示类似于以下信息的文本: Modular Disk Storage Manager Agent, Version 90.02.A6.14 Copyright (C) 2009-2010 Dell, Inc.
获得帮助 21 与 Dell 联络 注: 如果没有可用的 Internet 连接,您可以在购货发票、装箱单、帐单或 Dell 产品目录上查找联络信息。 Dell 提供了几种联机以及电话支持和服务选项。可用性会因国家和地区以及产品的不同而有所差异,某些服务 可能在您所在的区域不可用。有关销售、技术支持或客户服务问题,请与 Dell 联络: 1. 访问 support.dell.com。 2. 选择您的支持类别。 3. 如果您不是美国客户,请在 support.dell.com 页面底部选择国家代码,或者选择全部以查看更多选择。 4.