Owner manual
Table Of Contents
- Dell PowerVault MD3260/3260i/3660i/3660f/3060e Storage Arrays Owner's Manual
- About Your System
- Controller Modules
- RAID Controller Modules
- MD3260 SAS RAID Controller Module Features And Indicators
- MD3260i iSCSI RAID Controller Module Features And Indicators
- MD3660i iSCSI RAID Controller Module Features And Indicators
- MD3660f Fibre Channel RAID Controller Module Features And Indicators
- Expansion Controller Modules
- Controller Module—Additional Features
- Storage Array Thermal Shutdown
- System Password Reset
- Installing System Components
- Troubleshooting Your System
- Safety First—For You And Your System
- Troubleshooting Storage Array Startup Failure
- Troubleshooting Loss Of Communication
- Troubleshooting An SFP Transceiver
- Troubleshooting External Connections
- Troubleshooting Power Supply Modules
- Troubleshooting Array Cooling Problems
- Troubleshooting Expansion Enclosure Management Modules
- Troubleshooting RAID Controller Modules
- Troubleshooting Physical Disks
- Troubleshooting Array And Expansion Enclosure Connections
- Troubleshooting A Wet Storage Array
- Troubleshooting A Damaged Array
- Controller Failure Conditions
- Technical Specifications
- Getting Help

Item Indicator, Button, or
Connector
Icon Description
5 Cache active or cache
offload indicator
The cache active or cache offload indicator lights green when on-
board controller memory contains data.
If AC power fails, this LED changes to indicate cache offload status.
If the password reset function has successfully changed the
password, this LED flashes on and off briefly.
6 System identification
indicator
The system identification indicator blinks blue when system
identification switch push-button on the enclosure front panel is
pressed.
7 Controller fault indicator The controller fault indicator lights amber when controller fault is
detected.
8 Controller power indicator The controller power indicator lights green when controller power
is on.
9 SAS OUT port Provides SAS connection for cabling to a downchain expansion
enclosure.
10 iSCSI IN port 0
iSCSI IN port 1
iSCSI IN port 2
iSCSI IN port 3
Provides host-to-controller iSCSI 1 Gbps Ethernet connection.
MD3660i iSCSI RAID Controller Module Features And Indicators
Figure 10. MD3660i iSCSI RAID Controller Module Features and Indicators
Item Indicator, Button, or
Connector
Icon Description
1 Debug port Dell support only.
2 Ethernet management
connector
Provides a 100/1000 Mbps Ethernet connection for out-of-
band management of the enclosure.
3 Password reset switch Pressing this switch resets the password.
4 Battery fault indicator The battery fault indicator lights amber when battery backup
unit or battery has failed.
17