Dell EMC PowerVault MD 34XX/38XX Series 存储阵列 管理员指南 September 2018 Rev.
注意、小心和警告 注: “注意”表示帮助您更好地使用该产品的重要信息。 小心: “小心”表示可能会损坏硬件或导致数据丢失,并告诉您如何避免此类问题。 警告: “警告”表示可能会导致财产损失、人身伤害甚至死亡。 © 2012 - 2018 Dell Inc. 或其子公司。保留所有权利 Dell、EMC 和其他商标均是 Dell Inc.
目录 章 1: 简介.......................................................................................................................................12 Dell EMC PowerVault Modular Disk Storage Manager................................................................................................... 12 用户界面............................................................................................................................................................................... 12 企业管理窗口........................
主机类型......................................................................................................................................................................... 21 高级功能............................................................................................................................................................................... 21 支持的快照功能类型...............................................................................................................................................
更改 iSCSI 目标验证...........................................................................................................................................................40 输入相互验证权限..............................................................................................................................................................40 创建 CHAP 机密..................................................................................................................................................................
精简虚拟磁盘状态........................................................................................................................................................ 57 虚拟磁盘和备份服务的类型比较............................................................................................................................... 57 精简虚拟磁盘回滚........................................................................................................................................................58 初始化精简虚拟磁盘...............................
自动管理磁盘池中未配置的容量..................................................................................................................................... 78 找到磁盘池中的物理磁盘................................................................................................................................................. 79 重命名磁盘池...................................................................................................................................................................... 79 为磁盘池配置警报通知...............
快照回滚限制................................................................................................................................................................ 95 启动快照回滚................................................................................................................................................................ 95 恢复快照映像回滚........................................................................................................................................................95 取消快照映像回滚.
虚拟磁盘复制和修改操作...........................................................................................................................................116 创建复制向导................................................................................................................................................................116 虚拟磁盘复制失败........................................................................................................................................................117 首选 RAID 控制器模块所有权........
使用远程复制的限制.................................................................................................................................................. 130 设置远程复制......................................................................................................................................................................131 激活远程复制高级功能.....................................................................................................................................................131 停用远程复制.......
SMrepassist 公用程序...................................................................................................................................................... 150 未识别的设备..................................................................................................................................................................... 151 从未识别的存储阵列中恢复............................................................................................................................................
1 简介 小心: 按照本文档中所列任意步骤进行操作之前,请参阅 Safety, Environmental, and Regulatory Information(安全、环境和 管制信息)说明文件以了解重要安全信息。 最新版本的 Dell PowerVault Modular Disk Manager (MDSM) 支持以下 MD Series 系统: • 2U MD Series 系统: ○ Dell PowerVault MD 3400/3420 ○ Dell PowerVault MD 3800i/3820i ○ Dell PowerVault MD 3800f/3820f • 4U (dense) MD Series 系统: ○ Dell PowerVault MD 3460 ○ Dell PowerVault MD 3860i ○ Dell PowerVault MD 3860f 注: 安装附加物理磁盘支持高级功能密钥后,Dell MD Series 存储阵列最多可支持 2U 阵列 192 个驱动器或 4U (dense) 阵列 180 个驱动器。 主题: • • • • • • Dell
企业管理窗口 EMW 提供对存储阵列的高级别管理。启动 MD Storage Manager 时,将显示 EMW。EMW 包含: • • 设备选项卡 - 提供有关找到的存储阵列的信息。 设置选项卡 - 显示初始设置任务,引导用户添加存储阵列和配置警报。 设备选项卡在窗口左侧有一个树视图,其中显示找到的存储阵列、未识别的存储阵列和存储阵列的状态情况。找到的存储阵列由 MD Storage Manager 管理。MD Storage Manager 可使用未识别的存储阵列,但不能基于管理目的对其进行配置。设备选项卡右侧有一个 表视图,显示关于所选存储阵列的详细信息。 在 EMW 中可以执行以下操作: • • • • • • • • • • • • • • • • 在本地子网络上查找主机和托管存储阵列。 手动添加和移除主机与存储阵列。 闪烁或定位存储阵列。 命名或重命名找到的存储阵列。 在表视图中对存储阵列添加注释。 当客户端监测进程检测到事件时按计划或自动保存支持数据的副本。 将 EMW 视图首选项和配置数据存储在本地配置文件中。下次打开 EMW 时,本地配置文件中的数据将用于显示自定义的视图和 首选项。
此时将显示所选存储的上下文菜单。 2.
2 关于 MD 系列存储阵列 本章介绍有助于配置和操作 Dell MD Series 存储阵列的存储阵列概念。 主题: • • • • • • • • • • • • • 物理磁盘、虚拟磁盘和磁盘组 磁盘池 精简虚拟磁盘 RAID 级别 分段大小 虚拟磁盘操作 磁盘组操作 RAID 后台操作优先级 虚拟磁盘迁移和磁盘漫游 高级功能 多路径软件 Load balancing(负载平衡) 监测系统性能 物理磁盘、虚拟磁盘和磁盘组 存储阵列中的物理磁盘为数据提供物理存储容量。在可以开始将数据写入存储阵列之前,必须将物理存储容量配置为逻辑组件,这 些逻辑组件称为磁盘组和虚拟磁盘。 磁盘组是可在其上创建多个虚拟磁盘的一组物理磁盘。一个磁盘组中支持的最大物理磁盘数: • • RAID 0、RAID 1 和 RAID 10 为 96 个磁盘 RAID 5 和 RAID 6 为 30 个磁盘 可从存储阵列上的未配置容量创建磁盘组。 虚拟磁盘是磁盘组中的一个分区,该分区由磁盘组中物理磁盘的连续数据段组成。虚拟磁盘包括磁盘组中所有物理磁盘的数据段。 磁盘组中的所有虚拟磁盘都支持相同的 RAID 级别。存储阵列最多支持
表.
磁盘池 通过磁盘池,您可以在一组物理磁盘间随机分发来自各个虚拟磁盘的数据。虽然对构成磁盘池的物理磁盘没有最大数量限制,但每 个磁盘池必须至少包含 11 个物理磁盘。此外,磁盘池所包含的物理磁盘数量不能超过各存储阵列的最高限值。 精简虚拟磁盘 可以从现有磁盘池创建精简虚拟磁盘。通过创建精简虚拟磁盘可以设置大型虚拟空间,但仅在您需要时使用实际物理空间。 RAID 级别 RAID 级别决定了数据写入物理磁盘的方式。RAID 级别不同,提供的可访问性、一致性和容量级别也不同。 与使用单个物理磁盘相比,使用多个物理磁盘有以下优势: • • 将数据置于多个物理磁盘上(拆分)可让输入/输出 (I/O) 操作同时发生,因而能够提高性能。 如果发生错误,即便该错误由物理磁盘故障引起,也可以通过使用复制或一致性功能将冗余数据存储在多个物理磁盘,从而重建 丢失的数据。 每个 RAID 级别提供不同性能和保护。必须根据应用程序类型、访问权限、容错能力和存储的数据来选择 RAID 级别。 存储阵列支持 RAID 级别 0、1、5、6 和 10。磁盘组中可使用的最多和最少物理磁盘数量取决于 RAID 级别: • • 对于 RA
RAID 5 RAID 5 在所有物理磁盘上使用一致性和数据分段(分布式一致性),以提供高数据吞吐量和数据一致性,尤其适用于小规模随机访 问。RAID 5 是一个万能的 RAID 级别,适用于多用户环境,其中 I/O 大小一般很小,读取活动的比例很高,例如文件、应用程序、数 据库、Web、电子邮件、新闻和 Intranet 服务器。 RAID 6 RAID 6 类似于 RAID 5,但提供附加的一致性磁盘,因此一致性更出色。RAID 6 是最通用的 RAID 级别,适合于 I/O 大小一般很小而 且读取活动比例很高的多用户环境。如果磁盘组中使用大容量物理磁盘或使用大量物理磁盘,建议使用 RAID 6。 RAID 10 小心: 即使在存储阵列上激活了高级功能,也不要尝试在 RAID 10 配置中创建超过 120 个物理磁盘的虚拟磁盘组。超过 120 个物 理磁盘的限制可能导致存储阵列变得不稳定。 RAID 10 组合了 RAID 1 和 RAID 0,在复制的磁盘之间使用磁盘分拆。它提供高数据吞吐量和完整的数据一致性。通过使用偶数个物 理磁盘(四个或更多)可创建 RAID 10 级别的磁盘组和/或虚拟磁盘。
循环时间 介质验证操作仅在所选磁盘组上运行,与其他磁盘组无关。循环时间是在已配置介质验证的磁盘组中验证磁盘组的元数据区域和所 有虚拟磁盘所需的时间。当前循环结束后,磁盘组会自动开始下一循环。可以将介质验证操作的循环时间设置在 1 和 30 天之间。存 储控制器将根据循环时间控制对磁盘的介质验证 I/O 访问。 存储阵列会跟踪 RAID 控制器上每个磁盘组(与其他磁盘组无关)的循环并创建检查点。如果一个磁盘组上的介质验证操作被该磁盘 组上另一个操作抢占优先权或阻止,存储阵列会在当前循环结束后继续该操作。如果磁盘组上的介质验证过程因 RAID 控制器模块重 新启动而停止,存储阵列会从上一个检查点继续该过程。 虚拟磁盘操作限制 安装在存储阵列中的每个 RAID 控制器模块最多可拥有四个活动的并发虚拟磁盘进程。该限制适用于以下虚拟磁盘进程: • • • • • 后台初始化 前台初始化 一致性检查 重建 回写 如果冗余 RAID 控制器模块在进行现有虚拟磁盘进程时发生故障,则故障控制器上的进程会转移至对等控制器。如果对等控制器上已 存在四个活动的进程,则会将转移的进程置于暂挂状态。当活动的进程数低于四之后,会在对
磁盘组碎片整理 碎片整理可将磁盘组中的可用容量整合到一个相连区域中,而不会更改数据在虚拟磁盘中存储的方式。 磁盘组操作限制 每个已安装的 RAID 控制器模块最多可拥有一个活动的并发磁盘组进程。该限制适用于以下磁盘组进程: • • • • • 虚拟磁盘 RAID 级别迁移 分段大小迁移 虚拟磁盘容量扩展 磁盘组扩展 磁盘组碎片整理 如果冗余 RAID 控制器模块在进行现有磁盘组进程时发生故障,则故障控制器上的进程会转移至对等控制器。如果对等控制器上已存 在一个活动的磁盘组进程,则会将转移的进程置于暂挂状态。当对等控制器上的活动进程完成或停止之后,会恢复暂挂的进程。 注: 如果尝试在没有活动进程的控制器上启动磁盘组进程,而且磁盘组中的第一个虚拟磁盘由另一控制器拥有且该控制器上存在 活动的进程,则启动尝试会失败。 RAID 后台操作优先级 存储阵列支持对以下 RAID 操作采取常用的可配置优先级: • • • • • • • • 后台初始化 重建 回写 虚拟磁盘容量扩展 RAID 级别迁移 分段大小迁移 磁盘组扩展 磁盘组碎片整理 这些操作中每个操作的优先级都可更改,以满足要执行操作的环境的性能要求。
注: 仅具有所有成员物理磁盘的磁盘组及其关联虚拟磁盘可以从一个存储阵列迁移到另一个存储阵列。建议您仅迁移那些所有关 联成员虚拟磁盘均处于最佳状态的磁盘组。 注: 存储阵列支持的物理磁盘和虚拟磁盘的数目会限制迁移范围。 请使用以下方法之一移动磁盘组和虚拟磁盘: • • 虚拟磁盘热迁移—在迁移磁盘时开启目标存储阵列的电源。 虚拟磁盘冷迁移—在迁移磁盘时关闭目标存储阵列的电源。 注: 当目标存储阵列已有物理磁盘时,为了确保正确识别正在迁移的磁盘组和物理磁盘,可使用虚拟磁盘热迁移。 在尝试迁移虚拟磁盘时,请遵照以下建议: • 将物理磁盘移动到用于迁移的目标阵列 - 在虚拟磁盘热迁移期间将物理磁盘插入目标存储阵列时,请先等待插入的物理磁盘显示 在 MD Storage Manager 中或等待 30 秒(以先发生者为准),然后再插入下一个物理磁盘。 注: 如果不间隔开物理磁盘插入,存储阵列可能会变得不稳定,并且可能暂时无法管理。 • 将虚拟磁盘从多个存储阵列迁移到单个存储阵列 - 将虚拟磁盘从多个不同的存储阵列迁移到单个目标存储阵列时,会将同一存储 阵列中的所有物理磁盘作为一组移动到新的目标存储阵列中。确保一
• • 虚拟磁盘快照 虚拟磁盘复制 注: 列出的高级功能必须单独启用。如果购买了这些功能,则会获得一张激活卡,上面包含启用此功能的说明。 支持的快照功能类型 MD 存储阵列支持以下类型的虚拟磁盘快照高级功能: • 使用多个时间点 (PiT) 组的快照虚拟磁盘 - 此功能也支持快照组、快照映像和一致性组。 有关更多信息,请参阅高级功能 --- 快照虚拟磁盘。 快照虚拟磁盘、快照映像和快照组 快照映像是在特定时间点创建的关联基本虚拟磁盘内容的逻辑映像。主机无法直接读取或写入此类映像,因为快照映像仅用于保存 来自基本虚拟磁盘的数据。要允许主机访问快照映像中的数据的副本,必须创建快照虚拟磁盘。快照虚拟磁盘包含自己的存储库, 该存储库用于保存主机应用程序对基本虚拟磁盘所做的后续修改,而不会影响参考快照映像。 既可以手动创建快照映像,也可以自动创建快照映像,方法是建立计划以定义您希望创建快照映像的日期和时间。在快照映像中可 以包含以下对象: • • • 标准虚拟磁盘 精简配置的虚拟磁盘 一致性组 要创建快照映像,您必须创建快照组并为虚拟磁盘保留快照存储库空间。存储库空间基于当前虚拟磁盘保留的百分比。 您可以
该多路径软件能够识别到虚拟磁盘的多条路径并确立到该磁盘的首选路径。如果首选路径中的任何组件出现故障,多路径软件会自 动将 I/O 请求重新路由到备用路径,以使存储阵列继续运行,而不发生中断。 注: 多路径软件位于 MD Series 存储阵列资源 DVD 上。 首选和备用控制器及路径 首选控制器是被指定为虚拟磁盘或磁盘组所有者的 RAID 控制器模块。创建虚拟磁盘时,MD Storage Manager 将自动选择首选控制 器。虚拟磁盘创建后,可更改虚拟磁盘的首选 RAID 控制器模块所有者。如果主机仅与一个 RAID 控制器模块相连,则必须手动将首 选所有者分配给主机可访问的 RAID 控制器模块。 在首选控制器出现以下情况时,虚拟磁盘的所有权会从首选控制器移至次要控制器(也称为备用控制器): • • • 物理卸下 更新固件 涉及导致故障转移至备用控制器的事件 首选 RAID 控制器模块用来访问磁盘或主机服务器的路径称为首选路径;冗余路径称为备用路径。如果出现故障导致无法访问首选路 径,则存储阵列将自动使用备用路径访问数据,且机柜状态 LED 呈琥珀色闪烁。 虚拟磁盘所有权 MD Storage M
• • 实时文本 — 以接近实时的形式将性能数据显示在表格中。 后台(历史性)— 将一段较长时间的性能数据绘制成图形。可查看当前进行的会话的后台性能数据,也可查看先前保存的会话的 后台性能数据。 下表显示每种性能监测类型的一些特定特性: 表.
表.
表. 4: 性能数据解释 (续) 性能数据 性能调整的影响 如果单个虚拟磁盘的高速缓存命中率较低,应考虑对该虚拟磁盘 启用动态高速缓存预读取。动态高速缓存预读取可提高顺序性 I/O 工作负载的高速缓存命中率。 查看实时图形性能监测器数据 可在单幅图中查看实时图形性能,也可在一个屏幕上显示六幅图的控制板中查看实时图形性能。 实时性能监测器图像可针对多达五个对象绘制单一性能度量指标的时间线条图。图像的 x 轴表示时间,y 轴表示度量指标值。度量指 标值超过 99,999 时,便以千 (K) 为单位,从 100K 开始直至数值达到 9999K,此时便以百万 (M) 为单位。对于大于 9999K 而小于 100M 的数量,数值的有效值为十分之一(例如,12.3M)。 1. 要查看控制板,在阵列管理窗口 (AMW) 中,单击性能选项卡。 性能选项卡打开,显示六幅图。 2. 要查看单一性能图,在阵列管理窗口 (AMW) 中,选择监测器 > 运行状况 > 监测器性能 > 实时性能监测器 > 查看图形。 查看实时图形性能监测器对话框打开。 3.
• 每秒 MB 数 — 当前轮询时间间隔中的传输率。传输率为每秒钟可通过 I/O 数据连接而移动的数据量,以兆字节计量(又称为吞 吐量)。 注: 一千字节等于 1024 字节,一兆字节等于 1024 x 1024 字节。某些应用程序以 1000 字节作为一千字节,以 1,000,000 字 节作为一兆字节。由于此差别,监测器报告的数字可能较低。 • • I/O 延迟 — 完成一个 I/O 请求所花时间,以毫秒计量。对于物理磁盘,I/O 延迟包括寻道、旋转和传输时间。 高速缓存命中率 — 在 I/O 总数中,处理的数据来自高速缓存(而不是来自磁盘请求 I/O)所占的百分比。这包括在高速缓存中找 到所有数据的读取请求,以及在提交至磁盘之前覆盖高速缓存数据的写入请求。 SSD 高速缓存命中率 — 在读取 I/O 总数中,处理的数据来自 SSD 物理磁盘所占的百分比。 • 可用的度量指标包括当前值、最小值、最大值和平均值。当前值是收集的最新数据点。最小值、最大值和平均值取决于性能监测的 起始点。对于实时性能监测,起始点是阵列管理窗口 (AMW) 打开之时。对于后台性能监测、起始点是后台性能监测开始之时。 存
保存实时文本性能数据 保存数据是实时文本性能监测具备而实时图形性能监测所没有的一种功能。保存数据仅保存最近抽样间隔期的一组数据。 1. 在阵列管理窗口 (AMW) 中,执行以下操作之一: • • 单击性能选项卡,然后单击启动实时文本性能监测器链接。 选择监测器 > 运行状况 > 监测性能 > 实时性能监测器 > 查看文本。 此时将显示查看实时文本性能监测器对话框。 2. 要选择监测对象及抽样间隔,单击设置 按钮。 设置按钮仅在实时文本性能监测器尚未启动时可用。 此时将显示性能摘要设置对话框。 3. 在选择对象列表中,选择要查看其性能数据的对象。 可选择任意多个对象。使用 Ctrl-单击和 Shift-单击选择多个对象。要选择所有对象,勾选全选复选框。 4. 在抽样间隔列表中,选择想要的抽样间隔。 5. 6. 7. 8. 9.
查看有关当前后台性能监测器会话的信息 在执行此任务之前,确保后台性能监测正在进行。查看当前后台性能监测器对话框的停止链接旁边存在进行中图标,即表示后台性 能监测正在进行。 1. 在阵列管理窗口 (AMW) 中,单击性能选项卡。 2. 单击启动后台性能监测器链接。 此时将显示查看当前后台性能监测器对话框。 3. 将鼠标指针移动到停止链接之上。 此时将显示工具提示,显示后台性能监测已启动,后台性能监测已运行的时间长度,以及抽样间隔。 注: 为保证历时准确,在使用性能监测器时,不要使用同步 RAID 控制器模块的“时钟”选项,否则,历时有可能为负值。 查看当前的后台性能监测器数据 后台性能监视器图像可针对多达五个对象绘制单一性能度量指标的时间线条图。图像的 x 轴表示时间,y 轴表示度量指标值。度量指 标值超过 99,999 时,便以千 (K) 为单位显示,从 100 K 开始,直至数值达到 9999 K,此时便以百万 (M) 为单位显示。对于大于 9999 K 而小于 100 M 的数量,数值以小数形式表示(例如,12.3 M)。 1. 在阵列管理窗口 (AMW) 中,单击性能选项卡。 2.
此时将显示加载后台性能对话框。 4. 浏览至要打开的 .csv 文件,然后单击打开。 此时将显示查看保存的后台性能监测器对话框。 5. 在选择度量指标下拉列表中,选择要查看的性能数据。 一次只能选择一项度量指标。 6. 在选择对象列表中,选择要查看其后台性能数据的对象。 一幅图像中最多可选择五个监测对象。使用“Ctrl-单击”或“Shift-单击”可选择多个对象。在图像中,每个对象分别绘制一条线 条。图像显示保存文件中的所有数据点。 注: 如果在图形中没有看到定义的线条,它可能与另一线条重叠。 7. (可选)要更改图像上绘制的时间段,在开始日期、开始时间、结束日期和结束时间下拉列表中做出选择。 8.
3 查找和管理存储阵列 可以使用以下两种方法管理存储阵列: • • 带外管理 带内管理 当您打开模块化磁盘存储管理器 (MDSM) 时,加载的第一个页面是企业管理窗口 (EMW),它将允许您通过带内和带外连接来查找、 连接和管理 MD3 存储阵列。 缩进的存储名称是已查找到的阵列,并且当操作人员选择阵列时将允许管理阵列。 主题: • • • • • • • 带外管理 带内管理 存储阵列 设置存储阵列 配置警报通知 电池设置 设置存储阵列 RAID 控制器模块时钟 带外管理 在带外管理方法中,数据与命令和事件分离。数据通过主机到控制器的接口传输,而命令和事件通过管理端口以太网电缆传输。 此管理方法可以配置操作系统和主机适配器支持的最大虚拟磁盘数。 最多八个存储管理站可以同时监测带外托管存储阵列。此限制不适用于通过带内管理方法管理存储阵列的系统。 使用带外管理时,必须为每个 RAID 控制器模块的管理以太网端口设置网络配置。其中包括 Internet 协议 (IP) 地址、子网掩码和网 关。如果使用的是动态主机配置协议 (DHCP) 服务器,可以启用自动网络配置,但如果使用的不是 DHCP 服务器,必须
访问虚拟磁盘 MD Series 存储阵列中的每个 RAID 控制器模块均维护一个称为访问虚拟磁盘的特殊虚拟磁盘。主机代理软件使用访问虚拟磁盘在存 储管理站和带内管理存储阵列中的 RAID 控制器模块之间传递管理请求和事件信息;而且除非删除整个虚拟磁盘、虚拟磁盘组或虚拟 磁盘对,否则无法移除。访问虚拟磁盘不可用于应用程序数据存储;除非删除整个虚拟磁盘、虚拟磁盘组或虚拟磁盘对,否则无法 移除访问虚拟磁盘。默认 LUN 为 31。 存储阵列 必须先将存储阵列添加到 MD Storage Manager,才能设置存储阵列以实现优化使用。 注: 只能在 EMW 中添加存储阵列。 可执行以下操作: • • 自动查找存储阵列。 手动添加存储阵列。 注: 在使用 Automatic(自动)选项添加存储阵列之前,验证主机或管理站网络配置(包括站 IP 地址、子网掩码和默认网关) 是否正确。 注: 对于 Linux,请设置默认网关,以便将广播数据包发送至 255.255.255.
设置存储阵列 AMW 中的设置选项卡上显示了初始设置任务列表。使用初始设置任务区域中列出的任务,可确保完成基本设置步骤。 初次设置存储阵列时,请使用初始设置任务列表执行以下任务: • • • • • • • 定位存储阵列 - 通过打开系统标识指示灯,找到存储阵列在网络中的物理位置。 指定存储阵列的新名称 - 使用唯一名称来标识每个存储阵列。 设置存储阵列密码 - 为存储阵列配置密码以防止未经授权的访问。尝试更改存储阵列配置(例如创建或删除虚拟磁盘)时,MD Storage Manager 将提示输入密码。 配置 iSCSI 主机端口 - 自动配置每个 iSCSI 主机端口的网络参数或指定每个 iSCSI 主机端口的配置信息。 配置存储阵列 - 通过自动配置方法或手动配置方法,创建磁盘组、虚拟磁盘和热备用物理磁盘。 映射虚拟磁盘 - 将虚拟磁盘映射到主机或主机组。 保存配置 - 将配置参数保存到一个文件中,以便用于恢复配置,或在另一个存储阵列中再次使用该配置。 完成配置存储阵列的基本步骤之后,可执行以下可选任务: • • • • 手动定义主机 - 定义连接到存储阵列的主机和主机端口标识符。仅当主机未被自动
5. 重复步骤 1 到步骤 4 以命名或重命名附加存储阵列。 设置密码 可以为每个存储阵列配置密码,以防止其受到未经授权的访问。尝试更改存储阵列配置(例如创建或删除虚拟磁盘)时,MD Storage Manager 将提示您输入密码。查看操作不会更改存储阵列配置,因此无需提供密码。可以创建新密码或更改现有密码。 要设置新密码或更改现有密码,请执行以下操作: 1. 在 EMW 中,选择相关的存储阵列,然后打开该存储阵列的 AMW。 此时将显示所选存储阵列的 AMW。 2. 在 AMW 中,选择设置选项卡,然后单击设置存储阵列密码。 此时将显示设置密码对话框。 3. 如果要重设密码,请键入当前密码。 注: 如果是首次设置密码,请将当前密码留空。 4. 键入新密码。 注: 建议您使用至少包含 15 个字母数字字符的长密码以提高安全性。有关安全密码的更多信息,请参阅密码原则。 5. 在确认新密码中重新键入新密码。 6.
3. 单击是。 该存储阵列将从列表中移除。 启用高级功能 您可以在存储阵列中启用高级功能。要启用高级功能,必须从存储提供商处获得要启用的高级功能所专用的功能密钥文件。 要启用高级功能,请执行以下操作: 1. 从 AMW 的菜单栏中,选择存储阵列 > 高级功能。 此时将显示高级功能和功能包信息窗口。 2. 单击使用密钥文件。 选择功能密钥文件窗口打开,可供选择已生成的密钥文件。 3. 浏览至相关文件夹,选择相应的密钥文件,然后单击确定。 此时将显示确认启用高级功能对话框。 4. 单击是。 在存储阵列上启用所需的高级功能。 5. 单击关闭。 显示故障转移警报 您可以更改存储阵列的故障转移警报延迟。如果多路径驱动程序将虚拟磁盘转移到非首选控制器,使用故障转移警报延迟可延迟记 录严重事件。如果多路径驱动程序在指定的延迟期间内将虚拟磁盘再转移到首选控制器,则不会记录严重事件。如果转移时间超过 此延迟期间,关于虚拟磁盘不在首选路径上的警报将作为严重事件发布。当多个虚拟磁盘因系统错误(例如主机适配器发生故障) 而故障转移时,使用此选项还可以将多个警报减至最少数目。 要配置故障转移警报延迟,请执行以下操作: 1.
更改机柜顺序 可以更改 RAID 控制器模块和扩展机柜的顺序,以便与存储阵列中的硬件配置匹配。机柜顺序更改保持有效,直至下次修改。 要更改机柜顺序,请执行以下操作: 1. 2. 3. 4. 5. 在 AMW 的菜单栏中,选择硬件 > 机柜 > 更改 > 硬件查看顺序。 从机柜列表中选择要移动的机柜,然后单击向上或向下将机柜移动到新位置。 单击确定。 如果已为所选的存储阵列设置密码,将显示输入密码对话框。键入存储阵列的当前密码。 单击确定。 配置警报通知 MD Storage Manager 可针对存储阵列上需要注意的任何情况发送警报。警报可以通过电子邮件消息或简单网络管理协议 (SNMP) 陷 阱消息的形式发送。可以为所有存储阵列或单个存储阵列配置警报通知。 要配置警报通知,请执行以下操作: 1. 对于所有存储阵列,请在 EMW 中: 选择设置选项卡。 选择配置警报。 选择所有存储阵列。 单击确定。 此时将显示配置警报对话框。 2. 对于单个存储阵列: a. b. c. d. a. 选择设备选项卡。 b.
• • • 替换电子邮件地址 - 在已配置的电子邮件地址区域中,选择要替换的电子邮件地址,接着在电子邮件地址中键入替换的电子 邮件地址,然后单击替换。 删除电子邮件地址 - 在已配置的电子邮件地址区域中,选择电子邮件,然后单击删除。 验证电子邮件地址 - 在电子邮件地址中键入电子邮件地址或在已配置的电子邮件地址区域中选择电子邮件地址,然后单击测 试。测试电子邮件会发送至所选的电子邮件地址。屏幕将显示带有测试和任何错误结果的对话框。 新添加的电子邮件地址将显示在已配置的电子邮件地址区域。 5. 对于已配置的电子邮件地址区域中所选的电子邮件地址,在要发送的信息列表中选择: • 仅事件 - 电子邮件警报仅包含事件信息。默认情况下,选择仅事件。 • 事件 + 配置文件 - 电子邮件警报包含事件信息和存储阵列配置文件。 • 事件 + 支持 - 电子邮件警报包含事件信息和压缩文件,该压缩文件包含已生成警报的存储阵列的完整支持信息。 6.
• • • 要设置使用 SNMP 陷阱的警报通知,必须在指定的网络管理站上复制并编译一个管理信息库 (MIB) 文件。 SNMP 陷阱消息不需要全局设置。发送至网络管理站或其他 SNMP 服务器的陷阱消息是标准网络流量,安全问题由系统管理员或 网络管理员处理。 对较特殊的通知,可在存储管理站、主机和存储阵列各级别配置警报目标。 1. 根据要为单个存储阵列或为所有存储阵列配置警报,执行以下操作之一: • • 单个存储阵列 — 在企业管理窗口 (EMW) 中,选择设备选项卡。右键单击要发送警报的存储阵列,然后选择配置警报。 所有存储阵列 — 在 EMW 中,选择设置选项卡。选择配置警报,然后选择所有存储阵列单选按钮,最后单击确定。 此时将显示配置警报对话框。 2. 选择 SNMP - 事件监测器源陷阱选项卡。 先前配置的所有 SNMP 地址都将显示在已配置的 SNMP 地址区域中。 3. 在团体名称文本框中,键入团体名称。 团体名称最多可含 20 个字符。 4. 在陷阱目标文本框中,键入陷阱目标,然后单击添加。 可以输入主机名、IPv4 地址或 IPv6 地址。 5.
注: 如果未配置团体名称,此字段被禁用。 6. 如果配置了多个团体名称,在“配置的 SNMP 地址”表的团体名称栏中,从下拉列表中选择一个团体名称。 7. 是否要在存储阵列发生验证故障时发送陷阱? • 是 — 勾选“配置的 SNMP 地址”表的发送验证失败陷阱栏的复选框。勾选此复选框将在 SNMP 请求因团体名称无法识别而 被拒绝时,向陷阱目标发送验证失败陷阱。 • 否 — 取消勾选“配置的 SNMP 地址”表的发送验证失败陷阱栏的复选框。 8. (可选)要验证 SNMP 警报配置正确,可发送一条测试消息。在“配置的 SNMP 地址”区域中,选择要测试的 SNMP 目标,然 后单击“测试”。测试消息将发送到该 SNMP 地址。此时将出现一个对话框,显示验证结果及任何错误。如果未选定团体名称, “测试”按钮禁用。 9.
4 使用 iSCSI 注: 以下几节仅与使用 iSCSI 协议的 MDxx0i 存储阵列有关。 主题: • • • • • • • • • • 更改 iSCSI 目标验证 输入相互验证权限 创建 CHAP 机密 更改 iSCSI 目标标识 更改 iSCSI 目标查找设置 配置 iSCSI 主机端口 高级 iSCSI 主机端口设置 查看或结束 iSCSI 会话 查看 iSCSI 统计信息和设置基准统计信息 编辑、删除或重命名主机拓扑 更改 iSCSI 目标验证 要更改 iSCSI 目标验证,请执行以下操作: 1. 在 AMW 中,选择设置选项卡。 2. 选择管理 iSCSI 设置。 此时将显示管理 iSCSI 设置窗口,并默认选择目标验证选项卡。 3. 要更改验证设置,可选择以下选项之一: • • 无 - 不进行启动器验证。选择无后,任何启动器均可访问目标。 CHAP - 使启动器尝试使用质询握手验证协议 (CHAP) 验证目标。请仅在需要使用相互 CHAP 验证时定义 CHAP 机密。如果选 择 CHAP,但未定义 CHAP 目标机密,将显示错误消息。请参阅创建 CHAP 机密。 4.
5. 单击 CHAP 机密以在显示的对话框中输入启动器 CHAP 权限。 6. 单击 OK(确定)。 7.
注: Open iSCSI(由 Red Hat Enterprise Linux 5 和带 SP 1 的 SUSE Linux Enterprise Server 10 使用)不支持使用目标别 名。 更改 iSCSI 目标查找设置 要更改 iSCSI 目标查找设置,请执行以下操作: 1. 在 AMW 中,选择设置选项卡。 2. 选择管理 iSCSI 设置。 此时将显示管理 iSCSI 设置窗口。 3. 选择目标查找选项卡。 4. 选择使用 iSNS 以激活 iSCSI 目标查找。 5.
ICMP 设置将应用到存储阵列中配置 IPv4 寻址的所有 iSCSI 主机端口。 注: ICMP 是 Internet 协议族的核心协议之一。ICMP 消息将确定是否可访问主机,以及数据包往返该主机所需的时间。 11.
此时将显示查看 iSCSI 统计信息窗口。 2. 在 iSCSI 统计信息类型区域中选择要查看的 iSCSI 统计信息类型。您可选择: • 以太网 MAC 统计信息 • 以太网 TCP/IP 统计信息 • 目标(协议)统计信息 • 本地启动器(协议)统计信息 3. 在选项区域中,选择: • • 原始统计信息 - 查看原始统计信息。原始统计信息是 RAID 控制器模块启动后所收集的所有统计信息。 基线统计信息 - 查看基线统计信息。基线统计信息是设置了基线时间后所收集的时间点统计信息。 选择统计信息类型以及原始统计信息或基线统计信息之后,详细统计信息将显示在统计表中。 注: 您可以单击另存为,将当前查看的统计信息另存为文本文件。 4. 要设置统计信息的基线,请执行以下操作: a. 选择基线统计信息。 b. 单击设置基线。 c.
5 事件监测器 事件监测器随 Dell PowerVault Modular Disk Storage Manager 提供。事件监测器始终在后台运行,监测托管存储阵列上的活动。如果 事件监测器检测到任何严重问题,即可通过电子邮件和/或简单网络管理协议 (SNMP) 陷阱消息通知主机或远程系统。 要获得最及时、连续的事件通知,请在 24 小时全天候运行的管理站上启用事件监测器。在多个系统上启用事件监测器或同时让事件 监测器和 MD Storage Manager 处于活动状态可能会造成重复事件,但这并不表示阵列上出现多重故障。 事件监测器是独立于企业管理窗口 (EMW) 运行的后台任务。 要使用事件监测器,请执行以下操作之一: • • 为要监测的托管设备设置警报目标。可能的警报目标包括 Dell Management Console。 通过将 emwdata.
6 关于主机 主题: • • • • • • • 配置主机访问权限 使用“主机映射”选项卡 移除主机访问权限 管理主机组 创建主机组 I/O 数据路径保护 管理主机端口标识符 配置主机访问权限 Dell EMC PowerVault Modular Disk Storage Manager (MD Storage Manager) 由多个模块组成,其中一个模块为 Host Context Agent, 该模块属于 MD Storage Manager 安装的一部分,始终在后台运行。 如果 Host Context Agent 在主机上运行,那么 MD Storage Manager 将自动检测该主机和将 Host Context Agent 与存储阵列连接的主 机端口。主机端口将显示在阵列管理窗口 (AMW) 的主机映射选项卡中。主机必须手动添加在主机映射选项卡的默认主机组中。 注: 在使用 iSCSI 协议的 MD3800i、MD3820i 和 MD3860i 存储阵列中,Host Context Agent 不是动态的,必须在建立 iSCSI 会话之后重新启动,才能自动对它们进行检测。 请使用“定义主
定义主机 您可以使用 AMW 中的“定义主机向导”为存储阵列定义主机。可以添加已知的非关联主机端口标识符或新的主机端口标识符。 添加主机端口标识符之前,必须先指定用户标签(输入用户标签之前将禁用添加按钮)。 要定义主机,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡。 2. 执行以下操作之一: • • • 从菜单栏中选择主机映射 > 定义 > 主机。 选择设置选项卡,然后单击手动定义主机。 选择 Host Mappings(主机映射)选项卡。在要添加主机的对象树中右键单击根节点(存储阵列名称)、默认组节点或主机 组节点,然后从弹出菜单中选择 Define(定义) > Host(主机)。 此时将显示指定主机名窗口。 3. 在主机名中,输入不超过 30 个字符的字母数字名称。 4. 选择是否打算使用此存储阵列中的存储分区?中的相关选项,然后单击下一步。 此时将显示指定主机端口标识符窗口。 5.
管理主机组 主机组是由两个或多个主机组成的逻辑实体,这些主机可以共享对存储阵列上特定虚拟磁盘的访问权限。您可以使用 MD Storage Manager 创建主机组。 主机组中的所有主机均必须具有相同的主机类型(操作系统)。此外,主机组中的所有主机均必须具有特定软件(例如群集软件) 才能管理虚拟磁盘共享和访问。 如果主机是群集的一部分,则群集中每个主机均必须连接至存储阵列,且群集中的每个主机均必须添加至主机组。 创建主机组 要创建主机组,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡。 2. 在对象树中,选择存储阵列或默认组。 3. 请执行以下操作之一: • • 从菜单栏中,选择主机映射 > 定义 > 主机组。 右键单击存储阵列或默认组,从弹出式菜单中选择定义 > 主机组。 此时将显示定义主机组窗口。 4. 在输入新主机组名称中键入新主机组的名称。 5. 在选择要添加的主机区域中选择相应的主机。 6. 单击添加。 新主机将添加到组中的主机区域中。 注: 要移除主机,可在组中的主机区域中选择主机,然后单击移除。 7.
移除主机组 要移除主机组,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡,然后在对象树中选择主机组节点。 2. 请执行以下操作之一: • • 在菜单栏中,选择主机映射 > 主机组 > 移除。 右键单击主机组节点,从弹出式菜单中选择移除。 此时将显示移除窗口。 3.
注: 有关配置主机的更多信息,请参阅关于主机。 如果某一组件(例如 RAID 控制器模块)或电缆出现故障,或者首选 RAID 控制器模块的数据路径发生错误,那么虚拟磁盘所有权将 移交至备用的非首选 RAID 控制器模块进行处理。此故障或错误称为故障转移。 访问存储阵列并提供 I/O 路径故障转移的主机系统上已安装多路径框架的驱动程序,例如 Microsoft Multi-Path IO (MPIO) 和 Linux Device Mapper (DM)。 有关 Linux DM 的更多信息,请参阅适用于 Linux 的 Device Mapper 多路径。有关 MPIO 的更多信息,请参阅 Microsoft.
7 磁盘组、标准虚拟磁盘和精简虚拟磁盘 主题: • • • • • • • • • • • • • • 创建磁盘组和虚拟磁盘 精简虚拟磁盘 选择适当的物理磁盘类型 使用自加密磁盘确保物理磁盘安全 配置热备用物理磁盘 物理磁盘安全 存储设备丢失保护 盘位丢失保护 主机到虚拟磁盘映射 受限映射 存储分区 磁盘组和虚拟磁盘扩展 磁盘组迁移 存储阵列介质扫描 创建磁盘组和虚拟磁盘 磁盘组在存储阵列的未配置容量中创建,而虚拟磁盘在磁盘组或磁盘池的可用容量中创建。每个磁盘组中支持的最大物理磁盘数为 120(激活高级功能后为 180)。连接至存储阵列的主机在虚拟磁盘中读取并写入数据。 注: 要创建虚拟磁盘,必须先将物理磁盘组织为磁盘组并配置主机访问权限。然后才能在磁盘组中创建虚拟磁盘。 要创建虚拟磁盘,请使用以下方法之一: • • 从未配置的容量中创建磁盘组。先为磁盘组定义 RAID 级别和可用容量(可用存储空间),然后为新磁盘组中的第一个虚拟磁盘 定义参数。 在现有磁盘组或磁盘池的可用容量中创建新虚拟磁盘。只需指定新虚拟磁盘的参数。 每个磁盘组在创建时都会配置一定数量的可用容量。可以使用该可用容量将磁盘组细分为一
注: 可以从磁盘池创建精简配置的虚拟磁盘。如果您没有使用磁盘池,则只能创建标准虚拟磁盘。有关更多信息,请参阅精简虚 拟磁盘。 您可以使用自动配置或手动配置来创建磁盘组。 要创建磁盘组,请执行以下操作: 1. 要启动创建磁盘组向导,请执行以下操作之一: • • • • 要从存储阵列的未配置容量中创建磁盘组,请在存储和复制服务选项卡上选择一个存储阵列,右键单击未配置的总容量节 点,然后从弹出菜单中选择创建磁盘组。 要从存储阵列的未分配物理磁盘中创建磁盘组,请在存储和复制服务选项卡上选择一个或多个物理磁盘类型相同的未分配物 理磁盘,然后从菜单栏选择 Storage(存储) > Disk Group(磁盘组) > Create(创建)。 选择硬件选项卡,接着右键单击未分配的物理磁盘,然后从弹出菜单中选择创建磁盘组。 要创建安全磁盘组 — 在 Hardware(硬件)选项卡上选择一个或多个物理磁盘类型相同的未分配安全型物理磁盘,然后从菜 单栏中选择 Storage(存储) > Disk Group(磁盘组) > Create(创建)。 此时将显示简介(创建磁盘组)窗口。 2.
• • • • 在许多主机中,每个存储分区可映射 256 个逻辑单元号 (LUN),但具体数量因操作系统而异。 创建一个或多个虚拟磁盘并分配映射后,必须在操作系统中注册虚拟磁盘。此外,必须确保主机能够识别物理存储阵列名称与虚 拟磁盘名称之间的映射。请根据操作系统运行基于主机的公用程序 hot_add 和 SMdevices。 如果存储阵列由具有不同介质类型或不同接口类型的物理磁盘组成,那么存储和复制服务选项卡的未配置的总容量窗格中可能会 显示多个未配置容量节点。如果扩展机柜中存在可用的未分配的物理磁盘,则每个物理磁盘类型都会有相关的未配置容量节点。 您无法从不同的物理磁盘技术类型创建磁盘组和随后的虚拟磁盘。每个由磁盘组构成的物理磁盘均必须属于同样的物理磁盘类 型。 注: 创建虚拟磁盘之前,请确保已创建磁盘组。如果选择未配置容量节点或未分配的物理磁盘来创建虚拟磁盘,则将显示需 要磁盘组对话框。单击是并使用创建磁盘组向导来创建磁盘组。创建磁盘组之后,将显示创建虚拟磁盘向导。 要创建标准虚拟磁盘,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2.
注: 要选择不相邻的虚拟磁盘,请按 并单击以选择相应虚拟磁盘。要选择相邻的虚拟磁盘,请按 并单击以选 择相应虚拟磁盘。要选择所有可用的虚拟磁盘,请单击全选。 5. 单击确定。 此时将显示一条消息,提示您确认虚拟磁盘修改优先级的更改。 6. 单击是。 7.
• MD Storage Manager 可确定允许的分段大小转换。不适合从当前分段大小进行转换的分段大小将在此菜单上显示为不可用。允许 的转换通常为当前分段大小的两倍或一半。例如,如果当前虚拟磁盘分段大小为 32 KB,则允许的新虚拟磁盘分段大小为 16 KB 或 64 KB。 注: 更改分段大小操作比其他修改操作(例如,更改 RAID 级别或向磁盘组添加可用容量)更为耗时。这是由数据的识别方式以 及此操作期间所进行的临时内部备份过程造成的。 更改分段大小操作所需的时间量取决于: • • • • • 主机中的 I/O 负载 虚拟磁盘的修改优先级 磁盘组中的物理磁盘数 物理磁盘端口数 存储阵列 RAID 控制器模块的处理能力 如果要更快速地完成此操作,可更改修改优先级,不过这可能会降低系统 I/O 性能。 要更改虚拟磁盘的分段大小,请执行以下操作: 1. 在 AMW 中,选择存储和复制服务选项卡,然后选择一个虚拟磁盘。 2. 从菜单栏中,选择存储 > 虚拟磁盘 > 更改 > 分段大小。 3. 选择所需的分段大小。 此时将显示一条消息,提示您确认所选的分段大小。 4.
精简虚拟磁盘 从磁盘池创建虚拟磁盘时,您可以选择创建精简虚拟磁盘,而不是标准虚拟磁盘。精简虚拟磁盘在创建时具有物理(或首选)容量 和虚拟容量,允许灵活扩展以满足不断增长的容量需求。 在创建标准虚拟磁盘时,您是根据应用程序数据和性能所需的大致空间量来分配所有可用存储。如果将来要扩展标准虚拟磁盘的大 小,必须向现有磁盘组或磁盘池添加物理磁盘。利用精简虚拟磁盘可以创建具有较小物理存储分配容量的大型虚拟磁盘,并且容量 可以按需增长。 注: 只能从现有磁盘池创建精简虚拟磁盘。 精简虚拟磁盘的优势 精简虚拟磁盘(也称为精简配置)为主机呈现更具逻辑性的存储视图。 利用精简虚拟磁盘可以在写入数据时为每个虚拟磁盘动态分配存储。使用精简配置有助于消除在创建标准虚拟磁盘时通常会出现的 大量未使用物理容量。 但是,在某些情况下,标准虚拟磁盘可以提供比精简配置更合适的备用方案,例如,在以下情况中: • • 您预计虚拟磁盘上的存储消耗非常难以预测或变化无常 某个依赖特定虚拟磁盘的应用程序对于任务极为关键 精简虚拟磁盘上的物理容量与虚拟容量 配置精简虚拟磁盘时,可以指定以下类型的容量: • • 物理(或首选) 虚拟 虚拟容量是指
以下限制适用于精简虚拟磁盘: • • • • 无法更改精简虚拟磁盘的分段大小。 无法为精简虚拟磁盘启用预读一致性检查。 无法将精简虚拟磁盘用作“虚拟磁盘备份”中的目标虚拟磁盘。 无法在远程复制(传统)操作中使用精简虚拟磁盘。 精简虚拟磁盘属性 从现有磁盘池中的可用容量创建精简虚拟磁盘时,可以手动设置磁盘属性,或者允许 MD Storage Manager 分配默认属性。有以下可 供手动设置的属性: • • • 首选容量 - 设置虚拟磁盘的初始物理容量(MB、GB 或 TB)。磁盘池中的首选容量以 4 GB 增量进行分配。如果指定的容量数不 是 4 GB 的倍数,MD Storage Manager 将分配 4 GB 倍数的容量,并将其余容量指定为未使用。如果存在不是 4 GB 倍数的空间, 可以使用该空间来增加精简虚拟磁盘的大小。要增加精简虚拟磁盘的大小,请选择存储 > 虚拟磁盘 > 增加容量。 存储库扩展策略 - 选择自动或手动以指定 MD Storage Manager 是否必须自动扩展物理容量阈值。如果选择自动,请输入触发自 动容量扩展的最大扩展容量值。MD Storage Manager 以
表.
2. 选择您要初始化的精简虚拟磁盘。 精简虚拟磁盘在磁盘池节点下列出。 3. 选择存储 > 虚拟磁盘 > 高级 > 初始化。 此时将显示初始化精简虚拟磁盘窗口。 4. 选择使用不同的存储库。 5. 根据您是否希望保留当前的存储库以便将来使用,请选中或清除删除现有存储库,然后单击下一步。 6. 选择下列选项之一: • • 是 - 如果您的存储阵列上有多个磁盘池 否 - 如果您的存储阵列上只有一个磁盘池 此时将显示选择磁盘池窗口。 7. 选择保留现有磁盘池,然后单击下一步。 此时将显示 Select Repository(选择存储库)窗口。 8.
8. 使用 Preferred capacity(首选容量)框指定虚拟磁盘的初始物理容量,并使用 Units(单位)列表指定要采用的特定容量单位 (MB、GB 或 TB)。 注: 不要将所有容量分配给标准虚拟磁盘,以确保为复制服务(快照映像、快照虚拟磁盘、虚拟磁盘副本和远程复制)留出 存储容量。 注: 不考虑指定的容量,则磁盘池的容量以 4 GB 的增量分配。任何不是 4 GB 倍数的容量均不会分配且不可用。要确保全部 容量均可用,请以 4 GB 的增量指定容量。如果存在不可用的容量,重新获得不可用容量的唯一方式是增加虚拟磁盘的容 量。 系统根据您在上一步中输入的值,使用匹配的存储库填充磁盘池物理容量候选表。 9. 从此表中选择存储库。 现有存储库位于列表的顶端。 注: 重新使用现有存储库的好处是,您可以避免在创建新存储库虚拟磁盘时出现初始化过程。 10.
选择适当的物理磁盘类型 可以在存储阵列中创建磁盘组和虚拟磁盘。必须从存储阵列提供的未配置容量、可用容量或现有磁盘池中选择要为虚拟磁盘分配的 容量。然后为该虚拟磁盘定义基本参数和可选的高级参数。 随着各种物理磁盘技术的出现,现可在一个存储阵列中混用不同介质类型和不同接口类型的物理磁盘。 使用自加密磁盘确保物理磁盘安全 自加密磁盘 (SED) 技术可防止未经授权访问已从存储阵列中物理卸下的物理磁盘上的数据。存储阵列具有安全密钥。自加密磁盘仅 通过具有正确安全密钥的阵列提供数据访问。 自加密磁盘或安全型物理磁盘可在写入期间加密数据和在读取期间解密数据。 可通过安全型物理磁盘创建安全磁盘组。通过安全型物理磁盘创建安全磁盘组时,该磁盘组中的物理磁盘将启用安全保护。安全型 物理磁盘启用安全保护后,该物理磁盘需要 RAID 控制器模块的正确安全密钥才能读取或写入数据。存储阵列中的所有物理磁盘和 RAID 控制器模块共享同一安全密钥。共享的安全密钥提供对物理磁盘的读取和写入访问权限,而每个物理磁盘上的物理磁盘加密密 钥用于加密数据。在启用安全保护前,安全型物理磁盘的工作方式与任何其他物理磁盘相同。 无论何时将电源关闭然后再
• • • 存储阵列中已安装安全密钥。 存储阵列中至少安装了一个安全型物理磁盘。 在 Hardware(硬件)选项卡中选择的所有物理磁盘都是安全型物理磁盘。 您可以擦除启用了安全保护的物理磁盘,以便在另一磁盘组或另一存储阵列中重新使用这些物理磁盘。在擦除启用了安全保护的物 理磁盘时,请确保数据无法读取。当您在“物理磁盘类型”窗格中选择的所有物理磁盘均已启用安全保护,且所选物理磁盘不属于 磁盘组时,Hardware(硬件)菜单中便会显示 Secure Erase(安全擦除)选项。 存储阵列密码可保护存储阵列免受未授权用户的潜在破坏性操作。存储阵列密码独立于自加密磁盘,不应与用于保护安全密钥副本 的密码短语混淆。不过,设置存储阵列密码是一个很好的习惯。 创建安全密钥 创建安全密钥时,阵列会生成密钥并安全存储它。不能读取或查看安全密钥。安全密钥的副本必须保存在其他某种备份存储媒体 上,以防出现系统故障或用于传输到另一个存储阵列。提供的密码短语用于对安全密钥加密和解密,以便将安全密钥存储在其他介 质上。 创建安全密钥时,还要提供信息以创建安全密钥标识符。与安全密钥不同,可读取或查看安全密钥标识符。安全密钥标识符
10. 单击创建密钥。 11. 如果显示文本输入无效对话框,请选择: • • 是 - 输入的字符串中存在错误。此时将显示文本输入无效对话框。请阅读对话框中的错误消息,然后单击确定。请转到步骤 6。 否 - 输入的字符串没有错误。请转到步骤 12。 12.
密码短语必须符合以下条件: • • • • • 长度必须介于 8 和 32 个字符之间。 必须至少包含一个大写字母。 必须至少包含一个小写字母。 必须至少包含一个数字。 必须至少包含一个非字母数字字符(例如 < > @ +)。 输入的密码短语已屏蔽。 4. 在确认密码短语中,重新输入您在密码短语中输入的相同字符串。 记录您输入的密码短语。您需要在以后的安全操作中使用该短语。 5. 单击保存。 6.
2. 选择一个或多个未分配的物理磁盘。 3. 请执行以下操作之一: • • 从菜单栏选择硬件 > 热备用保护。 右键单击物理磁盘,然后从弹出式菜单中选择 Hot Spare Coverage(热备用保护)。 此时将显示热备用物理磁盘选项窗口。 4.
型磁盘组,热备用物理磁盘必须与磁盘组的安全保护功能相符。例如,非安全型物理磁盘不能用作受安全保护的磁盘组的热备用磁 盘。 注: 对于安全型磁盘组,首选安全型热备用物理磁盘。如果安全型物理磁盘不可用,则可将非安全型物理磁盘用作热备用物理磁 盘。为确保磁盘组保持为安全型磁盘组,必须将非安全型热备用物理磁盘更换为安全型物理磁盘。 如果选择安全型物理磁盘作为非安全磁盘组的热备用磁盘,则会显示一个对话框,指示当前正在将安全型物理磁盘用作非安全磁盘 组的热备用磁盘。 磁盘组机柜丢失保护的可用性取决于组成磁盘组的物理磁盘的位置。机柜丢失保护可能会因故障物理磁盘和热备用物理磁盘的位置 而丧失。要确保机柜丢失保护不受影响,必须更换故障物理磁盘以启动回写过程。 在更换故障物理磁盘时,虚拟磁盘将保持联机状态且可访问,这是因为热备用物理磁盘会自动替换故障物理磁盘。 物理磁盘安全 “物理磁盘安全”功能可以防止对存储阵列中卸下的物理磁盘上的数据进行未授权访问。安全型物理磁盘使用独特的加密密钥在写 入时对数据加密,在读取时对数据解密。安全型物理磁盘可以是自加密磁盘 (SED) 或联邦信息处理标准 (FIPS) 物理磁盘。 要实施物理磁盘
RAID 级别 机柜丢失保护条件 由于 RAID 级别 5 至少需要 3 个物理磁盘,因此存储阵列拥有的扩展机柜少于 3 个时将无法实现机柜丢失保 护。由于 RAID 级别 6 需要至少 5 个物理磁盘,因此存储阵列拥有的扩展机柜少于 5 个时也将无法实现机柜 丢失保护。 RAID 级别 1 确保复制对中的每个物理磁盘位于不同的扩展柜。如此一来,同一扩展柜中的磁盘组便有两个以上的物理磁 盘。 例如,如果创建一个包含 6 个物理磁盘的磁盘组(3 个复制对),通过指定每个复制对中的物理磁盘位于单 独的扩展柜中,只有 2 个扩展柜能实现机柜丢失保护。下例表明了这一概念: • • • 复制对 1 - 机柜 1 插槽 1 中的物理磁盘和机柜 2 插槽 1 中的物理磁盘。 复制对 2 - 机柜 1 插槽 2 中的物理磁盘和机柜 2 插槽 2 中的物理磁盘。 复制对 3 - 机柜 1 插槽 3 中的物理磁盘和机柜 2 插槽 3 中的物理磁盘。 由于 RAID 级别 1 至少需要 2 个物理磁盘,因此当存储阵列拥有的扩展机柜少于 2 个时,将无法实现机柜丢失 保护。 RAID 级别 0 由于 RAID 级别 0
• • • 每台主机都有各自的 LUN 地址空间。MD Storage Manager 允许不同的主机或主机组使用相同的 LUN 访问存储阵列中的虚拟磁 盘。 并非所有操作系统都具有相同数量的可用 LUN。 您可以在 AMW 中的主机映射选项卡中定义映射。请参阅使用“主机映射”选项卡。 创建主机到虚拟磁盘映射 定义映射的原则: • • • 带外存储阵列无需访问虚拟磁盘映射。如果存储阵列使用带外连接进行管理,并将访问虚拟磁盘映射分配到默认组,则访问虚拟 磁盘映射将分配到默认组中创建的每个主机内。 大多数主机在每个存储分区中有 256 个映射的 LUN。LUN 编号从 0 到 255。如果您的操作系统将 LUN 限制为 127,则尝试将虚 拟磁盘映射到大于或等于 127 的 LUN 时,主机将无法对其进行访问。 必须使用存储分区向导创建主机组或主机的初始映射,然后才能定义附加映射。请参阅存储分区。 要创建主机到虚拟磁盘的映射,请执行以下操作: 1. 在 AMW 中,选择主机映射选项卡。 2. 在对象树中,选择: • 默认组 • 未定义的映射节点 • 单独定义的映射 • 主机组 • 主机 3.
4. 在逻辑单元号中,选择相应的 LUN。 下拉列表仅显示与所选虚拟磁盘相关联的当前可用 LUN。 5. 单击确定。 注: 从操作系统停止与此虚拟磁盘相关联的所有主机应用程序,然后卸载此虚拟磁盘(如果适用)。 6. 在更改映射对话框中,单击是以确认更改。 此时将检查此映射的有效性并进行保存。已定义的映射窗格将更新以显示新映射。对象树也将更新以显示所有主机组或主机的移 动情况。 7. 如果存储阵列设置了密码,此时将显示输入密码对话框。键入存储阵列的当前密码,然后单击确定。 8. 如果配置 Linux 主机,请在此主机上运行 rescan_dm_devs 公用程序,然后根据需要重新装载虚拟磁盘。 注: 此公用程序将作为 MD Storage Manager 安装过程的一部分在主机上进行安装。 9.
小心: 可能无法访问数据 - 在磁盘组级别更改所有权会将该磁盘组中的每个虚拟磁盘转移至其他 RAID 控制器模块并使用新的 I/O 路径。如果不想将每个虚拟磁盘设置到新路径,请在虚拟磁盘级别更改所有权。 磁盘组的所有权已更改。现在,磁盘组的 I/O 通过此 I/O 路径引导。 注: 多路径驱动程序重新配置并重新识别新路径之前,磁盘组可能无法使用新的 I/O 路径。通常,此操作需要的时间在 5 分 钟以内。 更改磁盘组的 RAID 级别 更改磁盘组的 RAID 级别会改变构成磁盘组的每个虚拟磁盘的 RAID 级别。操作期间可能会对性能带来轻微影响。 更改磁盘组 RAID 级别的原则: • • • • 此操作一旦开始便无法取消。 磁盘组必须处于最佳状态才能执行此操作。 在此操作期间,数据仍然可用。 如果磁盘组中没有足够的容量转换至新的 RAID 级别,将显示错误消息,不能继续进行操作。如果有未分配的物理磁盘,请使用 Storage(存储) > Disk Group(磁盘组) > Add Physical Disks (Capacity)(添加物理磁盘(容量)) 选项向磁盘组添加附加 容量,然后重试操作。 要
在此示例中,mpath6 设备包含两个路径: -- /dev/sdf at Host 1, Channel 0, Target 0, LUN 2 --/dev/sde at Host 0, Channel 0, Target 0, LUN 2 3. 使用以下命令刷新多路径设备映射: # multipath -f /dev/mapper/mapth_x 其中,mapth_x 是要删除的设备。 4. 使用以下命令删除与此设备相关的路径: # echo 1 > /sys/block/sd_x/device/delete 其中,sd_x 是 multipath 命令返回的 SD 节点(磁盘设备)。对于此设备的所有路径重复此命令。例如: #echo 1 > /sys/block/sdf/device/delete #echo 1 > /sys/block/sde/device/delete 5. 从 c 盘移除映射,或删除 LUN(如有必要)。 6. 如果要映射另一个 LUN 或增加虚拟磁盘容量,请从 MD Storage Manager 执行此操作。 注: 如果只是在测试 LUN 移除,则可在此步骤上停止操作。 7.
存储分区 存储分区是由一个或多个虚拟磁盘组成的逻辑实体,可以由单个主机访问,或在主机组中的主机之间共享。首次将虚拟磁盘映射至 特定主机或主机组时,将创建存储分区。定向至该主机或主机组的后续虚拟磁盘映射不会创建另一个存储分区。 在以下情况下,一个存储分区即足够: • • 只有一个附加的主机可以访问存储阵列中的所有虚拟磁盘 所有附加的主机均可访问存储阵列中的所有虚拟磁盘 选择该配置类型时,所有主机必须具有相同的操作系统及特定软件(如群集软件),才能管理虚拟磁盘共享和可访问性。 在以下情况下,需要多个存储分区: • • 特定主机必须访问存储阵列中的特定虚拟磁盘 具有不同操作系统的主机已附加到同一存储阵列。在此情况下,将为每种主机类型创建一个存储分区 可使用存储分区向导定义单个存储分区。存储分区向导将指导您完成以下操作所需的主要步骤:指定哪些主机组、主机、虚拟磁盘 和关联的逻辑单元号 (LUN) 将包含在该存储分区中。 出现以下情况时,存储分区将失败: • • • 所有映射均已定义 您为主机组创建的映射与主机组中某主机的既有映射相互冲突 您为主机组中某主机创建的映射与主机组的既有映射相互冲突 出现以下情况
注: 您也可以使用 Windows 和 Linux 主机上的命令行界面 (CLI) 将可用容量添加到磁盘组。有关更多信息,请参阅 Dell EMC PowerVault MD 34XX/38XX Series Storage Arrays CLI Guide(Dell EMC PowerVault MD 34XX/38XX 系列存储 阵列 CLI 指南)。 注: 容量扩展完成后,磁盘组中的附加可用容量便可用于创建新的虚拟磁盘或扩展现有虚拟磁盘。 虚拟磁盘扩展 虚拟磁盘扩展属动态修改操作,可增加标准虚拟磁盘的容量。 注: 快照存储库虚拟磁盘可通过 CLI 或 MD Storage Manager 进行扩展。所有其他虚拟磁盘类型仅可通过 CLI 进行扩展。 如果您收到快照库虚拟磁盘已满的警告,则可通过 MD Storage Manager 扩充快照库虚拟磁盘。 要增加虚拟磁盘的容量,请完成以下步骤: 1.
导出磁盘组 导出磁盘组操作可使磁盘组中的物理磁盘做好移除准备。您可以移除用于脱机存储的物理磁盘,或者向不同存储阵列中导入磁盘 组。导出磁盘组操作完成后,所有物理磁盘都将处于脱机状态。任何相关虚拟磁盘或可用容量节点均不会再显示于 MD Storage Manager 中。 非可导出的组件 必须先移除或清除所有不可导出的设置,然后才能完成导出磁盘组操作。需移除或清除以下设置: • • • • • • 持久保留 主机到虚拟磁盘的映射 虚拟磁盘复制对 快照虚拟磁盘和快照存储库虚拟磁盘 远程复制对 复制存储库 导出磁盘组 在源存储阵列上: 1. 2. 3. 4. 5. 6.
4.
3. 选择暂挂介质扫描。 注: 此操作适用于磁盘组中的所有虚拟磁盘。 4.
8 磁盘池和磁盘池虚拟磁盘 通过磁盘池,您可以在一组物理磁盘间随机分发来自各个虚拟磁盘的数据。磁盘池能够跨越存储阵列中按逻辑组合在一起的物理磁 盘组提供 RAID 保护和一致的性能。尽管对构成磁盘池的物理磁盘没有最大数量限制,每个磁盘池必须至少包含 11 个物理磁盘。此 外,磁盘池所包含的物理磁盘数量不能超过各存储阵列的最高限值。各磁盘池中的物理磁盘必须满足以下条件: • • 属于 SAS 或近线 SAS 具有相同的物理磁盘速度(以 RPM 为单位) 注: 标准 SAS 的物理磁盘速度最高为 15,000 rpm,3.
• • • • • • 磁盘池中的所有物理磁盘介质类型必须相同。不支持固态磁盘 (SSD)。 磁盘池中的虚拟磁盘分段大小无法更改。 磁盘池无法从存储阵列中导出,也无法导入至不同存储阵列。 磁盘池的 RAID 级别无法更改。MD Storage Manager 自动将磁盘池配置为 RAID 级别 6。 磁盘池中的所有物理磁盘类型必须相同。 您可以使用自加密磁盘 (SED) 来保护磁盘池,但物理磁盘属性必须匹配。例如,启用了 SED 的物理磁盘无法与 SED 型物理磁盘 混用。您可以混用 SED 型物理磁盘和非 SED 型物理磁盘,但无法使用 SED 物理磁盘的加密功能。 手动创建磁盘池 可以使用存储阵列中未配置的容量创建磁盘池。 注: 确保在创建磁盘池之前已创建虚拟磁盘。 要创建磁盘池,请执行以下操作: 1. 选择存储和备份服务选项卡。 2. 选择未配置的容量节点。 3. 从菜单栏中,选择存储 > 磁盘池 > 创建。或者右键单击对象树中未配置的容量,然后选择创建磁盘池。 此时将显示创建磁盘池窗口。 4. 在磁盘池名称中键入磁盘池的名称。 5.
如果存储阵列中已定义磁盘池,而且将相同物理磁盘类型的新物理磁盘添加为磁盘池,则 MD Storage Manager 会提示向现有磁盘池 添加物理磁盘。如果新物理磁盘属于不同的物理磁盘类型,MD Storage Manager 会提示向现有磁盘池添加相同物理磁盘类型的物理 磁盘,并使用其他物理磁盘类型创建不同的磁盘池。 注: 如果存在相同物理磁盘类型的多个磁盘池,系统将显示一条消息,指示 MD Storage Manager 无法自动建议将物理磁盘加入 哪个磁盘池。但是,您可以手动向现有磁盘池添加物理磁盘。可以单击 No(否)以关闭 Automatic Configuration(自动配 置)对话框,并从 AMW 选择 Storage Array(存储阵列) > Disk Pool(磁盘池) > Add Physical disks (Capacity)(添加物 理磁盘(容量))。 如果在 Automatic Configuration(自动配置)对话框打开时向存储阵列中添加了附加物理磁盘,可单击 Update(更新)检测附加 的物理磁盘。最佳做法是,将所有物理磁盘同时添加到存储阵列中。此操作可使 MD St
1. 在 AMW 中,选择存储和复制服务选项卡。 2. 选择磁盘池。 3. 从菜单栏中,选择存储 > 磁盘池 > 更改 > 设置。 此时将显示更改磁盘池设置对话框。 4. 在更改警告阈值区域中,选中严重警告通知所对应的复选框。 也可选中预警通知所对应的复选框。 注: 只有在选择严重警告通知后才能选择预警通知。 5. 选择或键入一个值,以指定可用容量的百分比。 当磁盘池中的未配置(可用)容量达到指定的百分比时,SNMP 陷阱消息和电子邮件消息形式的警报通知将会发送到在配置警报 对话框中指定的目标地址。有关如何指定目标地址的更多信息,请参阅“配置警报通知”。 6.
• • • 降级重建优先级 - 降级重建优先级水平决定了磁盘池中单个物理磁盘出故障时数据重建操作的优先级。 严重重建优先级 - 严重重建优先级水平决定了磁盘池中至少两个物理磁盘出故障时数据重建操作的优先级。 后台操作优先级 - 后台操作优先级水平决定了磁盘池后台操作的优先级,例如虚拟磁盘扩展 (VDE) 和即时可用性格式 (IAF)。 要为磁盘池配置警报通知,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择磁盘池。 3. 从菜单栏中,选择存储 > 磁盘池 > 更改 > 设置。 此时将显示更改磁盘池设置对话框。 4.
要检查数据一致性,请执行以下操作: 1. 选择存储和备份服务选项卡。 2. 选择要检查的磁盘池或磁盘组。 3. 从菜单栏中选择下列操作之一: • 存储 > 磁盘组 > 高级 > 检查一致性 • 存储 > 磁盘池 > 高级 > 检查一致性 4. 单击是。 5.
安全磁盘池 可从安全型物理磁盘创建安全磁盘池。安全磁盘池中的物理磁盘将启用安全保护。只能通过配置有正确的安全密钥的 RAID 控制器模 块对物理磁盘进行读访问和写访问。 小心: 可能无法访问数据 - 磁盘池受到保护时,移除安全保护的唯一方法是删除磁盘池。删除磁盘池时,将删除组成磁盘池的虚 拟磁盘中的所有数据。 当电源关闭后再次开启时,所有启用安全保护的物理磁盘都会更改为安全锁定状态。在此状态下,只有当 RAID 控制器模块提供正确 的安全密钥时,才能访问数据。可从 Disk Pool Properties(磁盘池属性)对话框中查看存储阵列中任意磁盘池的“物理磁盘安全” 状态。系统将报告以下状态信息: • • 安全型 安全 表.
5. 使用 New virtual capacity(新的虚拟容量)框指定新的虚拟磁盘的虚拟容量,并使用 Units(单位)来指定要采用的特定容量 单位(MB、GB 或 TB)。 最小虚拟容量为 32 MB。 6. 在 Virtual disk name(虚拟磁盘名称)框中,输入虚拟磁盘的名称。 7. 要将主机映射至虚拟磁盘,选择 Map later(稍后映射)。 转到主机映射选项卡并将特定的主机和 LUN 分配到此虚拟磁盘后,才会为虚拟磁盘分配 LUN 并且可供主机访问。 8.
9 使用 SSD 高速缓存 SSD 高速缓存功能利用固态磁盘 (SSD) 物理磁盘改善存储阵列的只读性能。SSD 物理磁盘以逻辑方式进行分组,以提供与 RAID 控制 器模块内存中的主要高速缓存配合使用的次要高速缓存。 使用 SSD 高速缓存可改善应用程序吞吐量和响应时间,并为各种工作负载(尤其是高 IOP 工作负载)提供稳定的性能改进。 主题: • • • • • • • • • • • • • • SSD 高速缓存的工作方式 SSD 高速缓存的优点 选择 SSD 高速缓存参数 SSD 高速缓存限制 创建 SSD 高速缓存 查看与 SSD 高速缓存关联的物理组件 找到 SSD 高速缓存中的物理磁盘 向 SSD 高速缓存添加物理磁盘 从 SSD 高速缓存中移除物理磁盘 暂挂或恢复 SSD 高速缓存 更改 SSD 高速缓存中的 I/O 类型 重命名 SSD 高速缓存 删除 SSD 高速缓存 使用性能建模工具 SSD 高速缓存的工作方式 主机读取数据后,将数据存储在 DRAM 中,从用户指定的基本虚拟磁盘复制数据并存储到两个内部 RAID 虚拟磁盘(每个 RAID 控制 器模块一个)上。当您最初设置 SSD
还可以选择以下选项: • • • 从可用候选列表中选择 SSD 高速缓存的容量,这些候选包含不同数量的 SSD 物理磁盘。 是否要在当前映射到主机的所有合格虚拟磁盘上启用 SSD 高速缓存 要在现有虚拟磁盘上使用 SSD 高速缓存,还是在新创建的虚拟磁盘上使用 SSD 高速缓存 SSD 高速缓存限制 使用 SSD 高速缓存功能时适用以下限制: • • • • • • • SSD 高速缓存在快照虚拟磁盘上不受支持。 如果导入或导出启用或禁用了 SSD 高速缓存的基本虚拟磁盘,则不会导入或导出缓存的数据。 存储阵列上的最大可用 SSD 高速缓存容量取决于 RAID 控制器模块的主要高速缓存容量。 在删除 SSD 高速缓存之前,不能移除 SSD 高速缓存中的最后一个物理磁盘。 每个存储阵列仅支持一个 SSD 高速缓存。 如果 SSD 高速缓存中的所有 SSD 都支持数据保障功能并且启用了数据保障 (DA) 功能,SSD 高速缓存会自动启用 DA,并且无法 禁用此功能。 不能向启用了 DA 的 SSD 高速缓存添加不支持 DA 的 SSD。 创建 SSD 高速缓存 1.
找到 SSD 高速缓存中的物理磁盘 您可以使用“闪烁”选项定位 SSD 高速缓存中的物理磁盘。要定位 SSD 高速缓存中的物理磁盘,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 在树形视图中,选择 SSD 高速缓存,然后执行以下操作之一: • • 在菜单栏中选择存储 > SSD 高速缓存 > 闪烁。 右键单击 SSD 高速缓存并选择闪烁。 包含 SSD 高速缓存的物理磁盘上的 LED 将闪烁。 3. 定位物理磁盘后,单击确定。 LED 停止闪烁。 4. 如果磁盘组的 LED 并未停止闪烁,请从 AMW 的工具栏中选择硬件 > 闪烁 > 停止所有指示。 如果 LED 成功停止闪烁,将显示确认消息。 5. 单击确定。 向 SSD 高速缓存添加物理磁盘 要向 SSD 高速缓存添加物理磁盘,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2.
在 SSD 高速缓存的表格视图中,状态显示为最佳。 更改 SSD 高速缓存中的 I/O 类型 要更改 SSD 高速缓存中的 I/O 类型,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 请执行以下操作之一: • • 从菜单栏中,选择存储 > SSD 高速缓存 > 更改 I/O 类型,然后选择相应的 I/O 类型。 右键单击 SSD 高速缓存并选择更改 I/O 类型,然后选择相应的 I/O 类型。 在所选 SSD 高速缓存的表格视图中将显示新选择的 I/O 特性类型。 重命名 SSD 高速缓存 要重命名 SSD 高速缓存,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 在树形视图中,选择要重命名的 SSD 高速缓存。 3. 请执行以下操作之一: • • 从菜单栏中,选择存储 > SSD 高速缓存 > 重命名。 右键单击 SSD 高速缓存并选择重命名。 此时将显示重命名 SSD 高速缓存窗口。 4. 键入 SSD 高速缓存的新名称,然后单击确定。 删除 SSD 高速缓存 要删除 SSD 高速缓存,请执行以下操作: 1.
注: 在性能建模工具正在运行时,屏幕的主要区域会显示进度条。可以关闭或最小化该窗口,性能建模会继续运行。甚至可 以关闭 MD Storage Manager,性能建模会话仍然会继续运行。 注: 加速开始时,性能可能慢于从未启用 SSD 高速缓存的情况。 7. 要保存性能建模会话的结果,请单击另存为并将数据保存到 .
10 高级功能 - 快照虚拟磁盘 MD 存储阵列支持以下虚拟磁盘快照高级功能: • 使用多个时间点 (PiT) 组的快照虚拟磁盘 快照映像是在特定时间点(通常称为还原点)创建的关联基本虚拟磁盘内容的逻辑映像。主机无法直接读取或写入此类映像,因为 快照映像仅用于保存来自基本虚拟磁盘的数据。要允许主机访问快照映像中的数据的副本,必须创建快照虚拟磁盘。快照虚拟磁盘 包含自己的存储库,该存储库用于保存主机应用程序对基本虚拟磁盘所做的后续修改,而不会影响参考快照映像。 主题: • • • • • • • • • • • • • 快照映像和组 快照虚拟磁盘读/写属性 快照组和一致性组 了解快照存储库 创建快照映像 计划快照映像 执行快照回滚 创建快照组 将快照虚拟磁盘转换为读写 查看单个存储库虚拟磁盘的关联物理组件 创建一致性组 创建快照映像的快照虚拟磁盘 创建一致性组快照虚拟磁盘 快照映像和组 既可以手动创建快照映像,也可以自动创建快照映像,方法是建立计划以定义要创建快照映像的日期和时间。在快照映像中可以包 含以下对象: • • • 标准虚拟磁盘 精简配置的虚拟磁盘 一致性组 要创建快照映像,您必须创建快
• • 快照组 - 快照组是指单个关联基本虚拟磁盘的时间点映像的集合。 一致性组 - 一致性组是可以作为一个整体进行管理的一组虚拟磁盘。在一致性组上执行的操作会同时在组中的所有虚拟磁盘上执 行。 快照组 快照组的用途是在给定的基本虚拟磁盘上创建一系列快照映像,而不影响性能。您可以为快照组建立一个计划,从而在以后的特定 时间定期自动创建快照映像。 创建快照组时,以下规则适用: • • • • • 快照组在创建时可以包含或不含快照映像。 每个快照映像只能作为一个快照组的成员。 在所有虚拟磁盘类型中,只有标准虚拟磁盘和精简虚拟磁盘可包含快照组。非标准虚拟磁盘(例如快照虚拟磁盘)不能用于快照 组。 基本虚拟磁盘可以位于磁盘组或磁盘池中。 快照虚拟磁盘和快照组不能共存于同一个基本虚拟磁盘上。 快照组使用存储库保存组中所包含的快照映像的全部数据。快照映像操作使用的磁盘空间比完全物理备份少,因为存储库中存储的 数据只包括自最近快照映像后更改的数据。 快照组在创建之初包含一个存储库虚拟磁盘。存储库最初包含少量数据,这些数据随着后续数据更新而增加。您可以通过增加存储 库的容量或向存储库添加虚拟磁盘来增加存储库的大小。
对存储库候选排序 如果选择手动创建存储库,则可以通过在快照组设置窗口中选择占基本虚拟磁盘容量的百分比或指定首选容量,来筛选每个成员虚 拟磁盘的存储库候选。系统将根据您的选择显示最佳存储库候选。所显示的存储库候选可包含位于磁盘组或磁盘池上的全新和现有 存储库虚拟磁盘。 结合使用快照一致性组与远程复制 虽然虚拟磁盘可以属于多个一致性组,但必须为快照映像和远程复制分别创建单独的一致性组。 将包含一致性组的基本虚拟磁盘添加到远程复制(非传统、异步)时,存储库会自动清除最旧的快照映像,并将自动删除限制设置 为一致性组允许的快照限制上限。 此外,同时属于快照一致性组和远程复制组的所有成员虚拟磁盘必须属于同一远程复制组。 创建快照映像 快照映像是关联基本虚拟磁盘的内容的逻辑时间点映像。利用快照映像,可以创建存储阵列上的生产数据的多个副本,比完整副本 要快得多。快照映像跟踪自每个快照映像创建之后的源更改。可以为以下存储对象创建快照映像: • • • 标准虚拟磁盘 精简虚拟磁盘 一致性组 在创建快照映像之前,请考虑以下原则: • 如果尝试为快照组创建快照映像,而该快照组已达到其最大快照映像数量,则可以在执行以下操作之
注: 如果要指定快照组存储库的所有可自定义设置,请使用此选项。Manual(手动)方法属于高级方法。建议只有在您 完全了解物理磁盘一致性和最佳物理磁盘配置的情况下,才应继续使用 Manual(手动)方法。 注: 请确保在创建快照组存储库的存储阵列上有现有存储库、足够的可用容量节点或可用的未配置容量,否则无法创建存 储库,并且会显示错误消息。 5. 单击完成。 系统会创建关联基本虚拟磁盘的副本。快照映像及其属性显示在关联基本虚拟磁盘的导航树中。 取消挂起的快照映像 使用取消挂起的快照映像选项可取消尝试为快照组或一致性组创建快照映像时进入挂起状态的快照映像。 快照由于以下并发条件而进入挂起状态: • • 快照组的基本虚拟磁盘,或包含此快照映像的一致性组的一个或多个成员虚拟磁盘属于异步远程复制组的成员。 一个或多个虚拟磁盘目前正在进行同步操作。 同步操作完成时,快照映像创建操作即完成。在同步操作完成前,要取消挂起的快照映像创建,请执行以下操作: 1. 在 AMW 中,选择包含挂起的快照映像的快照组或一致性组。 2.
您可以创建每天或每周运行的计划,在创建每周运行的计划时,选择一周中的星期几(星期日至星期六)。要让计划变得更简单, 您可以导入某个快照组或一致性组的现有计划。此外,您还可以通过禁用计划来临时暂挂计划的快照映像创建。当计划被禁用时, 计划的快照映像创建不会发生。 创建快照计划 使用 MD Storage Manager 可以计划定期创建快照映像,以支持文件恢复和计划备份。您可以在最初创建快照组或一致性组时创建计 划,也可以向现有快照组或一致性组添加计划。创建快照映像计划后,可以修改这些计划和其他计划设置。 以下原则适用: • • • • 使用计划会产生大量快照映像,因此请确保您有充足的存储库容量。 每个快照组或一致性组只能拥有一个计划。 当存储阵列脱机或关闭时,不会发生计划的快照映像创建。 删除包含计划的快照组或一致性组时,计划也会被删除。 同步操作完成时,快照映像创建操作即完成。在同步操作完成前,要取消挂起的快照映像创建,请执行以下操作: 1. 在 AMW 中,选择包含挂起的快照映像的快照组或一致性组。 2.
• • 创建快照映像的快照虚拟磁盘,以便从快照虚拟磁盘检索删除的文件(基本虚拟磁盘保持原样)。 将快照映像还原到基本虚拟磁盘,以便将基本虚拟磁盘回滚到之前的时间点。 注: 主机将可以立即访问新回滚的基本虚拟磁盘,但在启动回滚后,现有基本虚拟磁盘将不允许主机进行读写访问。您可以在启 动回滚之前创建基本虚拟磁盘的快照,保存回滚之前的基本虚拟磁盘,以用于恢复。 当您需要回滚到特定时间点的已知良好数据集时,快照映像非常有用。例如,在虚拟磁盘上执行具有风险的操作之前,您可以创建 一个快照映像,从而为整个虚拟磁盘启用“撤消”功能。可以从以下类型的快照映像启动回滚: • • 基本虚拟磁盘的快照映像,这允许将与快照组关联的基本虚拟磁盘回滚到之前的状态。 一致性组快照映像,这允许将一致性组的所有或部分成员虚拟磁盘回滚到之前的状态。 快照回滚限制 • • 回滚操作不会更改与基本虚拟磁盘相关联的快照映像的内容。 当回滚操作正在进行时,无法执行以下操作: • ○ 删除正用于回滚的快照映像。 ○ 为参与回滚操作的基本虚拟磁盘创建新快照映像。 ○ 更改关联快照组的存储库已满策略。 存储阵列中正在进行以下任一操作时,不能再启
此时将显示确认恢复回滚窗口。 3.
1. 在 AMW 中,选择存储和备份服务选项卡。 2. 请执行以下操作之一: • • 选择基本虚拟磁盘或一致性组成员虚拟磁盘的快照映像,然后选择 Copy Services(复制服务) > Snapshot Image(快照映 像) > Rollback(回滚) > Change Priority(更改优先级)。 选择基本虚拟磁盘或一致性组成员虚拟磁盘的一致性组,然后选择 Copy Services(复制服务) > Consistency Group Snapshot Image(一致性组快照映像) > Rollback(回滚) > Change Priority(更改优先级)。 此时将显示更改回滚优先级窗口。 3. 在回滚优先级区域,使用滚动条设置回滚操作的优先级。 如果是更改一致性组快照映像的优先级,则优先级设置将应用到所选一致性组中的所有成员虚拟磁盘。 4.
• • • 一致性组存储库对容量有最低要求(取决于具体配置)。 为存储库定义容量需求时,应考虑针对该磁盘组或磁盘池中其他虚拟磁盘的所有潜在需求。请确保容量足以满足数据存储需求, 但是不要过度分配,否则很快就会用完存储阵列中的所有存储空间。 存储库候选列表可包含新的和现有的存储库虚拟磁盘。默认情况下,您在删除一致性组时,现有存储库虚拟磁盘将保留在存储阵 列上。现有存储库虚拟磁盘位于列表顶端。重新使用现有存储库虚拟磁盘的好处是,您可以避免在创建新存储库虚拟磁盘时出现 的初始化过程。 要创建一致性组存储库,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择备份服务 → 一致性组 → 创建。 此时将显示一致性组设置窗口。 3. 选择手动并单击下一步以自定义一致性组的存储库候选设置。 此时将显示一致性组存储库设置 - 手动窗口。 4. 根据占基本虚拟磁盘容量的百分比或首选容量,选择您希望如何筛选一致性组中的每个成员虚拟磁盘的存储库候选。 系统将基于您所做的选择,显示最适合每个成员虚拟磁盘的存储库候选。 5. 如果要编辑成员虚拟磁盘的存储库候选,请选择编辑单独的存储库候选。 6.
• • • 请使用易于理解和记忆的唯一、有意义的名称。 避免使用随意性名称或将来可能很快失去意义的名称。 如果您尝试将某个快照组重命名为已经由另一个快照组使用的名称,则会显示错误消息,并提示您为该组选择另一个名称。 要重命名快照组,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择要重命名的快照组,然后选择备份服务 > 快照组 > 重命名。 此时将显示重命名快照组窗口。 3. 键入该快照组的新名称,然后单击重命名。 删除快照组 使用删除快照组选项删除快照组。 删除快照组时,系统执行以下操作: • • • 从快照组删除所有现有快照映像。 删除与该快照组关联的存储库(如果选中)。 禁用与所删除的快照映像关联的所有快照虚拟磁盘。 要删除快照组,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择要删除的快照组,然后选择备份服务 > 快照组 > 删除。 此时将显示确认删除窗口。 3. 如果要删除与该快照组关联的存储库,请选择删除与此对象关联的所有存储库? 4.
创建一致性组 一致性组是多个虚拟磁盘的同步快照,从而确保一组虚拟磁盘备份的一致性。每个属于一致性组的虚拟磁盘被称为成员虚拟磁盘。 当您将虚拟磁盘添加到一致性组时,系统会自动创建对应此成员虚拟磁盘的新快照组。 以下原则适用: • • • • 如果基本虚拟磁盘位于标准磁盘组中,则任何关联一致性组的存储库成员可以位于标准磁盘组或磁盘池中。如果基本虚拟磁盘位 于磁盘池中,则任何关联一致性组的所有存储库成员必须位于与基本虚拟磁盘相同的磁盘池中。 无法在出现故障的虚拟磁盘上创建一致性组。 对于属于一致性组成员的每个虚拟磁盘,一致性组均包含一个快照组。您不能单独管理与一致性组关联的快照组。相反,您必须 在一致性组级别执行管理操作(创建快照映像、删除快照映像或快照组以及回滚快照映像)。 如果您尝试创建一致性组快照映像,那么出于以下原因,该操作可能保持挂起状态: ○ 包含此一致性组快照映像的基本虚拟磁盘是异步远程复制组的成员。 ○ 基础虚拟磁盘当前处于同步操作中。同步操作完成时,一致性组快照映像创建操作即完成。 要创建一致性组,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2.
此时将显示一致性组设置窗口。 3. 选择手动并单击下一步以自定义一致性组的存储库候选设置。 此时将显示一致性组存储库设置 - 手动窗口。 4. 根据占基本虚拟磁盘容量的百分比或首选容量,选择您希望如何筛选一致性组中的每个成员虚拟磁盘的存储库候选。 系统将基于您所做的选择,显示最适合每个成员虚拟磁盘的存储库候选。 5. 如果要编辑成员虚拟磁盘的存储库候选,请选择编辑单独的存储库候选。 6.
更改一致性组的设置 使用更改一致性组设置选项可修改创建一致性组时配置的自动删除设置和一致性组存储库设置。 • • • 自动删除设置 - 您可以配置每个一致性组,使组中保留的快照映像总数等于或少于用户定义的最大值。如果启用此选项,当创建 新的快照时,为了符合组允许的最大快照映像数量限制,系统会自动删除组中最旧的快照。 一致性组存储库设置 - 您可以定义一致性组成员存储库的最高百分比,该值决定当一致性组成员存储库的容量达到定义的百分比 时,将触发警告。此外,您可以指定当一致性组存储库的容量达到定义的最高百分比时,使用何种策略: ○ 自动清除最旧的一致性映像 - 系统自动清除一致性组中最旧的一致性映像,从而释放存储库的保留空间,以供在一致性组中 重复使用。 拒绝写入基本虚拟磁盘 - 当存储库达到定义的最高百分比时,系统会拒绝对触发存储库访问的基本虚拟磁盘执行任何 I/O 写请 求。 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 从一致性组类别节点选择要更改的一致性组,然后选择备份服务 > 一致性组 > 更改设置。 此时将显示更改一致性组设置窗口。 3. 根据需要更改一致性组设置。 4.
2. 请执行以下操作之一: • 选择要从一致性组移除的基础虚拟磁盘,然后选择 Storage(存储) > Virtual disk(虚拟磁盘) > Remove From Consistency Group(从一致性组移除)。 • 选择要添加成员虚拟磁盘的一致性组,然后选择备份服务 > 一致性组 > 移除成员虚拟磁盘。 3. 如果您选择属于多个一致性组的基本虚拟磁盘,或者选择要从中移除成员虚拟磁盘的一致性组,请执行以下操作之一: • 从一致性组表中,选择一个或多个要从中移除基本虚拟磁盘的一致性组,然后单击移除。 注: 您可以单击全选复选框以从表中显示的所有一致性组移除虚拟磁盘。 • 从成员虚拟磁盘表中选择要从一致性组中移除的成员虚拟磁盘,然后单击移除。 注: 您可以单击全选复选框以移除表中显示的所有虚拟磁盘。 4. 如果要删除一致性组中与一个或多个成员虚拟磁盘关联的所有存储库,请选择 Delete all repositories associated with this member virtual disk(删除与此成员虚拟磁盘关联的所有存储库)。 5.
最多包含 30 个字符。达到此限制后,无法继续在文本框中输入字符。如果基本虚拟磁盘名称包含 30 个字符,则组的默认名称使 用经过充分截短的基本虚拟磁盘名称,以便添加后缀 SV 和序列号字符串。 5. 在主机映射下拉列表中,指定要将主机映射到快照虚拟磁盘的方式。 • • • 立即映射到默认组 – 系统会自动为虚拟磁盘分配一个逻辑单元号 (LUN),并且连接到存储阵列的任何主机都能访问该虚拟磁 盘。 以后映射 – 直至您转到主机映射选项卡并对此虚拟磁盘分配特定的主机和 LUN 之前,不会为该虚拟磁盘分配 LUN 且任何主 机都无法访问它。 选择特定主机 – 您可以从列表中选择特定的主机或主机组。此选项仅在启用存储分区时才可用。 注: 请确保选择用来映射到快照虚拟磁盘的主机或主机组上有足够的可用 LUN。 6.
更改快照虚拟磁盘的设置 使用更改快照虚拟磁盘设置选项修改在创建快照虚拟磁盘时配置的存储库设置。可以修改快照虚拟磁盘存储库的最大百分比,以便 在快照虚拟磁盘存储库的容量达到定义的百分比时发出警告。 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择基础虚拟磁盘,然后选择 Copy Services(复制服务) > Snapshot Virtual disk(快照虚拟磁盘) > Change Settings(更 改设置)。 此时将显示更改快照虚拟磁盘设置窗口。 3. 根据需要修改存储库已满设置。 4.
• 所有关联快照存储库虚拟磁盘上的所有写入数据都被删除。快照虚拟磁盘或一致性组快照虚拟磁盘的参数与以前禁用的虚拟磁盘 参数保持相同。快照虚拟磁盘或一致性组快照虚拟磁盘的原始名称会保留。重新创建选项完成之后,可更改这些名称。 要重新创建快照虚拟磁盘或一致性组快照虚拟磁盘,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择要禁用的快照虚拟磁盘或一致性组快照虚拟磁盘,然后选择以下操作之一: • 备份服务 > 快照虚拟磁盘 > 重新创建。此时将显示确认重新创建快照虚拟磁盘窗口。 • 备份服务 > 一致性组快照虚拟磁盘 > 重新创建。此时将显示确认重新创建一致性组快照虚拟磁盘窗口。 3.
Disk(创建一致性组快照虚拟磁盘)。 此时将显示 Consistency Group Snapshot Virtual Disk Settings(一致性组快照虚 拟磁盘设置)窗口。转至步骤 4。 3. 如果在步骤 2 中选择了一致性组,请选择要为其创建快照虚拟磁盘的一致性组快照映像。请执行以下操作之一: • • 选择现有快照映像,再从一致性组快照映像表中选择快照映像,然后单击下一步。 选择新快照映像,再从现有快照组表中选择快照组,然后单击下一步。 此时将显示一致性组快照虚拟磁盘设置窗口。 4.
• • 为存储库定义容量需求时,应考虑针对该磁盘组或磁盘池中其他虚拟磁盘的所有潜在需求。请确保容量足以满足数据存储需求, 但是不要过度分配,否则很快就会用完存储阵列中的所有存储空间。 存储库候选列表可包含新的和现有的存储库虚拟磁盘。默认情况下,您在删除一致性组快照虚拟磁盘时,现有存储库虚拟磁盘将 保留在存储阵列上。现有存储库虚拟磁盘位于列表顶端。重新使用现有存储库虚拟磁盘的好处是,您可以避免在创建新存储库虚 拟磁盘时出现的初始化过程。 要创建一致性组快照虚拟磁盘存储库,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择要添加成员虚拟磁盘的一致性组,然后选择 Copy Services(复制服务) > Consistency Group(一致性组) > Remove Member Virtual Disks(移除成员虚拟磁盘)。。 此时将显示一致性组快照虚拟磁盘设置窗口。 3. 选择手动并单击下一步以自定义一致性组的存储库候选设置。 此时将显示一致性组快照虚拟磁盘存储库设置 - 手动窗口。 4.
• 备份服务 > 一致性组快照虚拟磁盘 > 禁用。此时将显示确认禁用一致性组快照虚拟磁盘窗口。 3.
• • • 快照虚拟磁盘 一致性组成员虚拟磁盘 复制对 以下原则适用: • • 使用此选项更改介质扫描设置时,只修改所选总存储库的设置。 这些设置应用于该总存储库中包含的所有个别存储库虚拟磁盘。 要更改介质扫描设置,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡,然后选择任意虚拟磁盘。 2. 选择要更改其介质扫描设置的存储对象。 3. 右键单击选定的存储对象,然后选择总体存储库 > 更改介质扫描设置。 此时将显示更改介质扫描设置窗口。 4. 选择启用介质扫描。 5.
注: 删除基本虚拟磁盘时,将自动删除所有关联的快照虚拟磁盘或一致性组快照虚拟磁盘。您无法删除处于正在进行中状态的虚 拟磁盘复制中的快照虚拟磁盘。 要重命名快照虚拟磁盘或一致性组快照虚拟磁盘,请执行以下操作: 1. 在 AMW 中,选择存储和备份服务选项卡。 2. 选择要禁用的快照虚拟磁盘或一致性组快照虚拟磁盘,然后选择以下操作之一: • Copy Services(复制服务) > Snapshot Virtual disk(快照虚拟磁盘) > Delete(删除)。。此时将显示 Confirm Delete Snapshot Virtual Disk(确认删除快照虚拟磁盘)窗口。 • 备份服务 > 一致性组快照虚拟磁盘 > 删除。此时将显示确认删除一致性组快照虚拟磁盘窗口。 3. 如果快照虚拟磁盘或一致性组快照虚拟磁盘是读写磁盘,则选择删除关联存储库的选项。 4.
该下拉列表中仅包含与关联的基础虚拟磁盘具有相同 DS 设置的合格存储库虚拟磁盘。您可以选择 Allow mismatch in DS attributes(允许 DS 属性中不匹配情况)以显示其他与基础虚拟磁盘的 DS 设置不同的存储库虚拟磁盘。 如果在您选择的磁盘组或磁盘池中有可用容量,容量微调框中将显示可用空间总量。 b. 根据需要调节 Capacity(容量)。 注: 如果在您选择的磁盘组或磁盘池中没有可用容量,则 Capacity(容量)微调框中显示的可用容量为 0。如果此存储阵 列具有 Unconfigured Capacity(未配置容量),则可以创建新磁盘组或磁盘池,然后使用该磁盘组或磁盘池中的新可 用容量来重新尝试此操作。 7.
• • • 快照虚拟磁盘 一致性组成员虚拟磁盘 一致性组成员快照虚拟磁盘 注: 请仅在 Recovery Guru 步骤或技术支持代表的指导下使用重新激活选项。此操作一旦开始便无法取消。 在您收到总存储库即将填满的警告时使用此选项。可执行以下任务之一来增加存储库容量: • • 添加一个或多个现有存储库虚拟磁盘。 使用磁盘组或磁盘池上的可用容量创建存储库虚拟磁盘。 注: 如果所有磁盘组或磁盘池上都没有可用容量,则可以采用未使用的物理磁盘的形式将未配置的容量添加到磁盘组或磁盘 池。 小心: 在仍然存在故障时使用“重新激活”选项会导致数据损坏或丢失,而存储对象将返回故障状态。 1. 在 AMW 中,选择存储和备份服务选项卡。 2.
11 高级功能 — 虚拟磁盘备份 注: 虚拟磁盘复制会覆盖目标虚拟磁盘上的数据。开始虚拟磁盘复制之前,请确保不再需要目标虚拟磁盘上的数据或对其进行备 份。 注: 如果订购了此功能,在收到的 Dell PowerVault MD Series 存储阵列包装箱中会同时收到高级功能激活卡。按照卡片上的说 明获取密钥文件并启用该功能。 注: 创建虚拟磁盘复制的首选方法是从快照虚拟磁盘复制。如此可使快照操作中使用的原始虚拟磁盘仍然完全可以接受读/写活 动,同时该快照被用作虚拟磁盘复制操作的源。 创建虚拟磁盘复制时,要创建一个复制对,其中的源虚拟磁盘和目标虚拟磁盘位于同一存储阵列上。 源虚拟磁盘是包含您要复制的数据的虚拟磁盘。源虚拟磁盘接受主机 I/O 读取活动并存储数据,直到数据被复制到目标虚拟磁盘。 源虚拟磁盘可以是标准或精简虚拟磁盘。 目标虚拟磁盘是位于磁盘组或磁盘池中的标准或精简虚拟磁盘,如果启用了传统版本,目标虚拟磁盘也可以是传统快照基本虚拟磁 盘。 使用虚拟磁盘复制的原因包括: • • • • 复制数据以改进访问 — 随着虚拟磁盘存储要求的变化,您可以使用虚拟磁盘副本来将数据复制到同一存储阵列中使用较大容
虚拟磁盘复制的类型 可执行脱机或联机虚拟磁盘复制。为确保数据完整性,在任何一种虚拟磁盘复制操作期间,对目标虚拟磁盘的所有 I/O 均将暂挂。 虚拟磁盘复制完成后,目标虚拟磁盘会自动变为对主机只读。 脱机复制 脱机复制会从源虚拟磁盘读取数据然后将其复制至目标虚拟磁盘,同时在进行复制的过程中,会暂挂对源虚拟磁盘的所有更新。在 脱机虚拟磁盘备份中,复制关系存在于源虚拟磁盘和目标虚拟磁盘之间。参与脱机复制的源虚拟磁盘可供执行读取请求,同时,虚 拟磁盘复制将显示正在进行或挂起状态。仅在脱机复制完成之后才会允许写入请求。如果源虚拟磁盘格式化为日志文件系统,则任 何尝试向源虚拟磁盘发出读取请求的操作均可能被存储阵列 RAID 控制器模块拒绝,导致显示错误消息。在虚拟磁盘复制完成后,请 确保目标虚拟磁盘的“只读”属性已禁用,从而防止显示错误消息。 联机复制 联机复制将创建存储阵列内任意虚拟磁盘的时间点快照副本,同时在复制进行时仍然允许对虚拟磁盘执行写入操作。实现方法是, 创建虚拟磁盘的快照并使用该快照作为复制的实际源虚拟磁盘。在联机虚拟磁盘复制中,将在快照虚拟磁盘和目标虚拟磁盘之间建 立关系。为其创建时间点映像的虚拟磁盘
• • • 状态为“失败”的虚拟磁盘不能用作源虚拟磁盘或目标虚拟磁盘。 状态为“降级”的虚拟磁盘不能用作目标虚拟磁盘。 参与修改操作的虚拟磁盘不能用作源虚拟磁盘或目标虚拟磁盘。修改操作包括: ○ ○ ○ ○ ○ 容量扩展 RAID 级别迁移 分段调整 虚拟磁盘扩展 虚拟磁盘碎片整理 注: 以下有关主机准备的章节还适用于通过 CLI 界面使用虚拟磁盘复制功能的情况。 创建虚拟磁盘复制 小心: 可能丢失数据 - 仅在虚拟磁盘复制处于“正在进行”或“挂起”状态时,参与虚拟磁盘复制的源虚拟磁盘才可供进行读取 I/O 活动。虚拟磁盘复制完成之后才会允许写入请求。如果源虚拟磁盘格式化为日志文件系统,则任何尝试向源虚拟磁盘发出读 取请求的操作均可能被存储阵列拒绝,并可能显示错误消息。日志文件系统驱动程序在尝试发出读取请求之前,会发出写入请 求。存储阵列将拒绝写入请求,由于写入请求被拒绝,读取请求可能不会发出。这种情况可能导致显示错误消息,表示源虚拟磁 盘处于写保护状态。要防止此问题发生,请勿在虚拟磁盘复制处于“正在进行”状态时,尝试访问参与虚拟磁盘复制的源虚拟磁 盘。此外,在虚拟磁盘复制完成后,请确保目标虚拟磁盘的“
• • • 从可用虚拟磁盘的列表选择源虚拟磁盘 从可用虚拟磁盘的列表选择目标虚拟磁盘 为虚拟磁盘复制设置复制优先级 完成向导对话框之后,虚拟磁盘复制将开始,源虚拟磁盘中的数据将被读取并写入目标虚拟磁盘。 当虚拟磁盘复制的状态为“正在进行”或“挂起”时,源虚拟磁盘和目标虚拟磁盘上会显示“操作正在进行”图标。 虚拟磁盘复制失败 可能导致虚拟磁盘复制失败的原因包括: • • • 从源虚拟磁盘读取时产生读取错误 向目标虚拟磁盘写入时产生写入错误 存储阵列中存在故障,从而影响源虚拟磁盘或目标虚拟磁盘 如果虚拟磁盘复制失败,事件日志中会将其记录为严重事件,AMW 中将显示“需要注意”图标。虚拟磁盘复制处于此状态时,主机 对源虚拟磁盘具有只读访问权限。使用 Recovery Guru 纠正故障之前,对目标虚拟磁盘的读取请求和写入请求均不会发生。 首选 RAID 控制器模块所有权 在虚拟磁盘复制期间,同一 RAID 控制器模块必须拥有源虚拟磁盘和目标虚拟磁盘。如果虚拟磁盘复制开始时,这两个虚拟磁盘没有 相同的首选 RAID 控制器模块,目标虚拟磁盘的所有权会自动转移给源虚拟磁盘的首选 RAID 控制器模块。虚拟磁
此时将显示选择复制类型向导。 6. 选择复制类型并单击下一步。 注: 如果选择联机,那么正在进行复制操作时,源虚拟磁盘不能用于任何 I/O 活动。 此时将显示选择目标虚拟磁盘窗口。 7. 选择相应的目标虚拟磁盘并单击下一步。 此时将显示确认窗口。 8. 在复制优先级区域中,选择相关的复制优先级,然后键入 yes 进行确认。 9.
• 虚拟磁盘复制停止之后,所有映射的主机对源虚拟磁盘拥有写入权限。如果数据被写入源虚拟磁盘,目标虚拟磁盘上的数据与源 虚拟磁盘上的数据则不再匹配。 要停止虚拟磁盘复制,请完成以下步骤: 1. 在 AMW 中,选择存储和复制服务选项卡,然后选择复制服务 > 虚拟磁盘 > 管理复制。 此时将显示复制管理器窗口。 2. 在表格中选择复制对。 3. 选择复制 > 停止。 4.
5. 选择复制 > 重新复制。 此时将显示“重新复制”窗口。 6. 设置复制优先级。 复制优先级共有五个:最低、低、中等、高、最高。如果复制优先级设为最低,则优先处理 I/O 操作,虚拟磁盘复制的时间较 长。如果复制优先级设为最高,则优先处理虚拟磁盘复制,而针对存储阵列的 I/O 活动则可能会受到影响。 移除复制对 使用移除复制对选项可移除一个或多个虚拟磁盘复制。源虚拟磁盘和目标虚拟磁盘的所有与虚拟磁盘复制相关的信息都将从虚拟磁 盘属性对话框和存储阵列配置文件对话框中移除。从存储阵列移除虚拟磁盘复制时,目标虚拟磁盘的“只读”属性也被移除。从复 制管理器移除虚拟磁盘复制后,可以选择目标虚拟磁盘作为新虚拟磁盘复制的源虚拟磁盘或目标虚拟磁盘。如果移除虚拟磁盘复 制,源虚拟磁盘和目标虚拟磁盘将不再显示在复制管理器中。 移除复制对时,请记住以下原则: • • 移除复制对不会删除源虚拟磁盘或目标虚拟磁盘上的数据。 如果虚拟磁盘复制处于“正在进行”状态,则必须先停止虚拟磁盘复制,然后再移除复制对。 要移除复制对,请执行以下操作: 1.
12 适用于 Linux 的 Device Mapper 多路径 主题: • • • • • • • 概述 使用 Device Mapper 多路径设备 (DMMP) Device Mapper 配置步骤 Linux 主机服务器重新引导最佳做法 有关特殊分区的重要信息 限制和已知问题 故障排除 概述 MD 系列存储阵列使用 Linux 操作系统软件框架(即 Device Mapper [DM])来启用 Linux 主机服务器上的多路径功能。DM 多路径功 能由物理磁盘和公用程序配合提供。本章介绍如何使用这些公用程序来完成在 Linux 系统上启动 MD 系列存储阵列的过程。 注: 在服务器上运行 MD 系列存储阵列资源 DVD 安装程序,然后选择“完整安装”或“主机安装”选项,将所需的 Device Mapper 软件组件安装到 Linux 主机服务器上。有关详细的安装过程,请参阅 Dell.
使用 MD Storage Manager 使用 MD Storage Manager 可执行以下操作: • • • 将主机服务器映射至 MD Series 存储阵列 创建虚拟磁盘 将新创建的阵列映射至主机服务器 注: 配置有 MDCU 的所有阵列都会自动添加到 EMW 中的设备列表中。 Device Mapper 配置步骤 要完成 DM 多路径配置并让存储可用于 Linux 主机服务器,请执行以下操作: 1. 扫描虚拟磁盘。 请参阅扫描新添加的虚拟磁盘。 2. 显示多路径设备拓扑。 请参阅使用多路径命令显示多路径设备拓扑。 3. 在多路径设备节点上创建分区。 请参阅在多路径设备节点上新建 fdisk 分区。 4. 向 DM 添加分区。 请参阅向 Device Mapper 添加新分区。 5. 在 DM 分区上创建文件系统。 请参阅在 Device Mapper 分区上创建文件系统。 6.
DELL 是设备供应商。 MD3xxxx 是设备型号。 Sdc 是设备所属 RAID 控制器的物理路径。 Sdb 是非设备所属 RAID 控制器的物理路径。 以下是 SLES 输出的示例: mpathb(360080e500017b2f80000c6ca4a1d4ab8) dm-21 DELL,MD3xxxx[size=1.0G][features=3 queue_if_no_path pg_init_retries 50][hwhandler=1 rdac][rw]\_ round-robin 0 [prio=6][active] \_ 4:0:0:22 sdx 65:112 [active][ready]\_ round-robin 0 [prio=1][enabled] \_ 6:0:0:22 sdcl 69:144 [active][ghost] 其中: mpathb 是 Device Mapper 创建的虚拟设备的名称。它位于 /dev/mapper 目录下。 DELL 是设备供应商。 MD3xxxx 是设备型号。 Sdx 是设备所属 RAID 控制器的物理路径。 Sdcl 是非设备所属 RAID
在 Device Mapper 分区上创建文件系统 使用标准 mkfs 命令在新建的 Device Mapper 分区上创建文件系统。 例如: # mkfs –t /dev/mapper/ 其中, 是要在其上创建文件系统的分区。 装载 Device Mapper 分区 使用标准的 mount 命令可装载 Device Mapper 分区,如下所示: # mount /dev/mapper/ 准备就绪可以使用 MD Series 存储阵列上新建的虚拟磁盘现已设置并可供使用。以后重新引导时,将自动查找多路径设备及其分区。 注: 要确保为数据提供完整性保护,请使用下面给出的步骤重新引导附加至 MD Series 存储阵列的 Linux 主机服务器。 Linux 主机服务器重新引导最佳做法 在 MD Series 存储阵列中使用 Device Mapper 多路径重新引导 Linux 主机服务器时,建议遵循以下步骤。 1.
表.
表.
13 配置非对称逻辑单元访问 如果 MD 系列 RAID 存储阵列支持非对称逻辑单元访问 (ALUA),则活动-活动吞吐允许 I/O 从 RAID 控制器模块传递到不属于该 RAID 控制器的虚拟磁盘。如果没有 ALUA,主机多路径驱动程序需要将以特定虚拟磁盘为目标的数据请求发送到拥有该磁盘的 RAID 控制 器模块。如果 RAID 控制器模块不具备该虚拟磁盘的所有权,则会拒绝此请求。 主题: • • • • • • • ALUA 性能注意事项 自动转移所有权 Microsoft Windows 和 Linux 上的本机 ALUA 支持 在 VMware ESXi 上启用 ALUA 验证 VMware ESXi 上的 ALUA 验证主机服务器是否对 MD 存储阵列使用 ALUA 在基于 ESXi 的存储阵列上设置轮询负载平衡策略 ALUA 性能注意事项 ALUA 允许具有双控制器(双工)配置的 MD 系列存储阵列通过任一 RAID 控制器模块处理 I/O 请求,但当 RAID 控制器模块访问非 其所有的虚拟磁盘时,性能会下降。为维护最佳吞吐量,主机驱动程序会与 RAID 控制器固件通信,以便将数据请求
表. 17: 不同存储阵列的阵列 pid 存储阵列 array_PID MD3400 MD34xx MD3420 MD34xx MD3800i MD38xxi MD3820i MD38xxi MD3800f MD38xxf MD3820f MD38xxf MD3460 MD34xx MD3860i MD38xxi MD3860f MD38xxf 2. 请重新引导基于 ESX 的主机服务器。 验证 VMware ESXi 上的 ALUA 要验证设置的 SATP 声明规则已添加至 VMware ESXi,对 ESXi 5.x 运行以下命令: # esxcli storage nmp satp rule list –s VMW_SATP_ALUA 验证声明规则 VMW_SATP_ALUA(带有 VID/PID = Dell/array_PID)是否显示指定的 tpgs_on 标记。 验证主机服务器是否对 MD 存储阵列使用 ALUA 对于 ESXi 5.
14 高级功能 - 远程复制 MD 存储阵列支持以下远程复制类型: • • 远程复制 - 使用时间点映像的标准异步复制,用于对本地和远程站点之间的重新同步进行批处理。光纤信道和 iSCSI 存储阵列 (非两者之间)都支持这种复制类型。 远程复制(传统)- 用于实时同步本地和远程站点数据的同步(或全写)复制。仅在光纤信道存储阵列上支持这种复制类型。 主题: • • • • • • • • • 关于异步远程复制 远程复制对和复制存储库 远程复制类型 远程复制的要求和限制 设置远程复制 激活远程复制高级功能 停用远程复制 远程复制组 复制对 关于异步远程复制 标准远程复制(异步)是一项基于 RAID 控制器的高级功能,在本地和远程存储阵列之间提供基于虚拟磁盘的数据复制。通过识别主 要(本地)和次要(远程)虚拟磁盘对(称为复制对),RAID 控制器固件跟踪针对复制对的主要虚拟磁盘的写入操作,并捕获在时 间点映像中,然后传输到复制对中的次要虚拟磁盘。 使用远程复制组可以管理两个虚拟磁盘的同步,以便在本地和远程存储阵列上创建一致性数据集。主要虚拟磁盘和次要虚拟磁盘上 的时间点映像可以进行批量重新同步,从而增加复制
远程复制功能之间的区别 与(同步)远程复制(传统)功能相比,标准(异步写入)远程复制高级功能使用时间点快照映像来捕获源虚拟磁盘的状态,并且 仅写入自上个时间点映像以来发生更改的数据。 对于标准远程复制,远程存储阵列未与本地存储阵列完全同步。于是,当远程存储阵列突然完全失效时,某些事务可能会丢失。 对于同步远程复制(传统),写入源虚拟磁盘的所有数据都复制到远程虚拟磁盘。这会产生与生产数据完全相同的实时远程副本。 其他区别包括: • • 需要的存储库虚拟磁盘数 - 标准远程复制需要为每个复制对(远程虚拟磁盘到本地虚拟磁盘)创建一个存储库虚拟磁盘。而远程 复制(传统)只需要一个存储库虚拟磁盘。 支持的数据协议 - iSCSI 和光纤信道存储阵列都支持标准远程复制。而远程复制(传统)只在光纤信道存储阵列上受支持。 注: 远程和本地存储阵列必须采用相同的数据协议 - 不支持在光纤信道与 iSCSI 存储阵列之间进行复制。 • 距离限制 - 使用标准远程复制高级功能时,本地与远程存储阵列之间的距离不受限制。根据一般的延迟和应用程序性能要求,远 程复制(传统)对于本地与远程存储阵列之间的距离限制约为 10 公里(6.
设置远程复制 使用 MD Storage Manager 设置本地和远程存储阵列之间的远程复制时,包含以下步骤: • • • 在本地和远程存储阵列上激活远程复制高级功能。 在本地存储阵列上创建远程复制组 向远程复制组添加虚拟磁盘复制对 激活远程复制高级功能 激活远程复制时,会自动将每个 RAID 控制器模块上的特定端口保留用于数据复制。保留端口后,发往该端口的所有与复制无关的 I/O 请求将被拒绝。只有配置用于远程复制的 RAID 控制器模块可与保留端口通信。 必须在本地和远程存储阵列上激活远程复制高级功能。 注: 先在本地存储阵列上执行下面的激活步骤,然后在远程存储阵列上重复这些步骤。 在本地存储阵列的 AMW 中,选择存储和备份服务选项卡。 选择备份服务 > 远程复制 > 激活。 如果您的存储阵列同时支持远程复制和远程复制(传统)高级功能,则选择远程复制。 如果已选择标准远程复制,请单击完成。 高级功能激活完成。 5. 如果已选择远程复制(传统),则在创建存储库窗口中,选择远程复制(传统)功能的复制存储库虚拟磁盘必须驻留的位置。选 择以下一项: 1. 2. 3. 4.
远程复制组的用途 通过创建远程复制组,可以统一管理组中的所有复制虚拟磁盘对。例如,组中的所有复制虚拟磁盘对可以共用相同的数据同步设 置、主要和次要角色以及写入模式。 远程复制组还具有以下特性: • • 本地存储阵列充当远程复制组的主要端,而远程存储阵列充当远程复制组的次要端。 在虚拟磁盘级别,从本地存储阵列添加到远程复制组的所有虚拟磁盘充当远程复制配置中的主要角色。而从远程存储阵列添加到 远程复制组的虚拟磁盘充当次要角色。 由于应用程序可能使用多个虚拟磁盘,远程复制组必须成对进行复制。远程复制组的所有成员作为一个协调的数据集进行同步,以 在远程站点提供一致的备份。 远程复制组的要求和原则 • • • • 必须在复制配置所使用的本地和远程存储阵列上启用并激活远程复制高级功能。 本地和远程存储阵列必须通过支持的光纤信道或 iSCSI 连接进行连接。 远程存储阵列必须包含一个虚拟磁盘,其容量大于或等于本地存储阵列中要与其组对的虚拟磁盘的容量。 默认情况下,所有新远程复制组在创建时都为空: • ○ 只能将复制对添加到远程复制组。 ○ 每个复制对只能作为远程复制组的成员。 未命名的存储阵列将显示在 MD S
选择复制对中的虚拟磁盘的原则 以下原则适用: • • • • • 在复制对中只能使用标准虚拟磁盘。不能使用精简配置或快照虚拟磁盘(任何类型)。 在创建复制对或远程复制组之前,必须在用于复制的本地和远程存储阵列上启用并激活远程复制高级功能。 本地和远程存储阵列必须通过支持的光纤信道或 iSCSI 连接进行连接。 远程存储阵列必须包含一个虚拟磁盘,其容量大于或等于本地存储阵列中的主要虚拟磁盘的容量。 要创建复制对,您需要使用本地存储阵列的 AMW 和远程存储阵列的 AMW 来完成创建过程。请确保您对两个存储阵列都拥有访 问权限。 创建复制对 此过程介绍如何在现有远程复制组上创建远程复制对。要创建新的远程复制组,请参阅“创建远程复制组”。 1. 在本地存储阵列的 AMW 中,选择存储和备份服务选项卡。 2. 选择备份服务 > 远程复制 > 远程复制 > 复制组 > 创建复制对。 此时将显示选择远程复制组窗口。 注: 如果本地存储阵列不包含远程复制组,则在继续之前,必须在本地存储阵列上创建一个远程复制组。 3. 选择现有远程复制组,然后单击下一步。 4.
2. 选择包含要移除的复制对的远程复制组,然后选择以下操作之一: • • 备份服务 > 远程复制 > 远程复制 > 复制组 > 移除。 从右侧窗格中的关联复制对表中,选择要移除的复制对,然后选择备份服务 > 远程复制 > 远程复制 > 复制对 > 移除。 此时将显示确认移除复制对窗口。 3.
15 管理固件下载 主题: • • • • • • • 下载 RAID 控制器和 NVSRAM 软件包 同时下载 RAID 控制器和 NVSRAM 固件 仅下载 NVSRAM 固件 下载物理磁盘固件 下载 MD3060e 系列扩展模块 EMM 固件 自我监测分析和报告技术 (SMART) 介质错误和不可读扇区 下载 RAID 控制器和 NVSRAM 软件包 每个固件文件都存在版本号。版本号表明该固件是主要版本还是次要版本。可以使用企业管理窗口 (EMW) 下载和激活主要固件版本 和次要固件版本。也可使用阵列管理窗口 (AMW) 仅下载和激活次要固件版本。 注: 固件版本的格式为 aa.bb.cc.dd。其中 aa 是主要固件版本。bb.cc.
请记住以下原则: • • 如果传输按钮未处于活动状态,请确保选择一个 NVSRAM 文件,或者清除传输带有 RAID 控制器模块固件的 NVSRAM 文件 复选框。 如果所选文件无效或与当前存储阵列配置不兼容,将显示文件选择错误对话框。单击确定将其关闭,然后选择兼容固件或 NVSRAM 文件。 8. 在确认下载对话框中,单击是。 下载开始。 9. 如果使用的是 EMW,请执行以下操作之一: • • 选择工具 > 升级 RAID 控制器模块固件。 选择设置选项卡,然后单击升级 RAID 控制器模块固件。 10. 在存储阵列窗格中,选择要升级 RAID 控制器模块固件或 NVSRAM 的存储阵列。 可以选择多个存储阵列。 注: “详细信息”窗格每次只显示一个存储阵列的详细信息。如果在“存储阵列”窗格中选择了多个存储阵列,则“详细信 息”窗格中不会显示这些存储阵列的详细信息。 11.
在“文件选择”区域中选择文件时,该文件的适用属性(如果有)会显示在“NVSRAM 文件信息”区域内。属性会指明该 NVSRAM 文件的版本。 5. 单击传输。 注: 如果选择的文件无效或与当前存储阵列配置不兼容,则会显示文件选择错误对话框。单击确定将其关闭,并选择兼容的 NVSRAM 文件。 6. 在确认下载对话框中单击“是”。 下载开始。 7. 请执行以下操作之一: • • 选择工具 > 升级 RAID 控制器模块固件。 选择设置选项卡,然后单击升级 RAID 控制器模块固件。 此时将显示升级 RAID 控制器模块固件窗口。 “存储阵列”窗格将列出存储阵列。“详细信息”窗格则显示在“存储阵列”窗格中选择的存储阵列的详细信息。 8. 在“存储阵列”窗格中,选择要为其下载 NVSRAM 固件的存储阵列。 可以选择多个存储阵列。 注: “详细信息”窗格每次只显示一个存储阵列的详细信息。如果在“存储阵列”窗格中选择了多个存储阵列,则“详细信 息”窗格中不会显示这些存储阵列的详细信息。 9.
注: 完成下载可能需要几分钟时间。下载期间,将显示下载物理磁盘 - 进度对话框。显示下载物理磁盘 - 进度对话框时,请勿尝 试另一项操作。 要下载物理磁盘固件,请执行以下操作: 1. 在 AMW 中,选择升级 > 物理磁盘固件。 此时将显示下载物理磁盘固件 - 简介窗口。 2. 单击下一步。 此时将显示下载物理磁盘固件 - 添加软件包窗口。 3. 在 Selected Packages(所选的软件包)区域中,单击 Add(添加)。导航到软件包位置,然后单击 OK(确定)。 所选的软件包会添加到要传输的软件包区域。 4. 单击下一步。 此时将显示下载物理磁盘固件 - 选择物理磁盘窗口。 5. 在兼容物理磁盘选项卡中,选择相应的物理磁盘或全选。 此时将显示确认下载对话框。 6. 键入 yes,然后单击 OK(确定)。 下载物理磁盘固件 - 进度窗口将显示物理磁盘固件下载的进度。 7.
自我监测分析和报告技术 (SMART) 自我监测分析和报告技术 (SMART) 监测所有物理磁盘组件的内部性能,以检测指示可能导致物理磁盘故障的错误。SMART 使用此 信息报告故障是否即将发生,以便在故障发生前更换物理磁盘。RAID 控制器将监测相连的所有物理磁盘,并在物理磁盘报告预测性 故障时通知用户。 介质错误和不可读扇区 如果 RAID 控制器在属于含冗余 RAID 级别(RAID 1、RAID 5 或 RAID 10)的磁盘组的物理磁盘上访问数据时检测到介质错误,控制器 会尝试从该磁盘组中的对等磁盘恢复数据并使用恢复后的数据纠正错误。如果控制器在访问对等磁盘时出错,将无法恢复数据,受 影响的扇区将添加到控制器所维护的不可读扇区日志中。扇区添加到不可读扇区日志的其他情况包括: • • 尝试访问属于非冗余磁盘组(RAID 0 或降级的 RAID 1、RAID 5 或 RAID 10)的物理磁盘时遇到介质错误。 重建期间源磁盘上遇到错误。 注: 不可读扇区上的数据不再可访问。 管理固件下载 139
16 固件资源清册 存储阵列由许多组件组成,其中可包括 RAID 控制器模块、物理磁盘和机柜管理模块 (EMM)。其中每个组件都包含固件。某些版本 的固件依赖于固件的其他版本。要捕获关于存储阵列中所有固件版本的信息,请查看固件资源清册。 如果固件资源清册不含特定存储阵列的信息,则固件资源清册服务在该存储阵列上不可用。 还可以将固件资源清册保存至文本文件。然后可将该文件发送给技术支持代表进行分析。技术支持代表可检测到任何固件不匹配问 题。 主题: • 查看固件资源清点 查看固件资源清点 1. 根据您要查看一个存储阵列还是所有存储阵列的固件信息,执行以下操作之一: • 一个存储阵列 - 在 AMW 中,选择 Summary(摘要) > View Firmware Inventory(查看固件资源清册)。 • 所有存储阵列 - 在 EMW 中,选择 Tools(工具) > Firmware Inventory(固件资源清册)。 2. 要将固件资源清册另存为文本文件,请单击另存为。 注: 如果未指定文件名的后缀,则会自动为该文件名添加后缀 *.txt。 3.
17 系统接口 主题: • • 虚拟磁盘服务 卷影复制服务 虚拟磁盘服务 Microsoft 虚拟磁盘服务 (VDS) 是 Windows 操作系统的一个组件。VDS 组件利用第三方供应商特定的软件模块(称为提供程序)来 访问和配置第三方存储资源,例如,MD Series Dense 存储阵列。VDS 组件具有一组应用程序编程接口 (API),提供用于管理磁盘和 其他存储硬件的单一接口。MD Series VDS 提供程序允许使用 Windows 工具(包括磁盘管理器)来访问和配置存储阵列虚拟磁盘。 适用于 MD 系列存储阵列的 VDS 提供程序在 MD 系列资源 DVD 中提供。有关 VDS 的更多信息,请参阅 Microsoft.
有关 VDS 和 VSS 的详细信息,请参见 Microsoft.
18 存储阵列软件 主题: • • • • • • • • • • • • • • • • 启动例行程序 设备运行状况 跟踪缓冲区 收集物理磁盘数据 事件日志 Recovery Guru 存储阵列配置文件 查看物理关联 从无响应存储阵列状态中恢复 找到物理磁盘 找到扩展机柜 捕获状态信息 SMrepassist 公用程序 未识别的设备 从未识别的存储阵列中恢复 启动或重新启动 Host Context Agent 软件 启动例行程序 在阵列的启动例行程序运行期间,请观察并倾听下表中说明的现象。有关前面板指示灯和背面板指示灯的说明,请参阅关于存储阵 列。 观察/倾听 操作 警报消息 请参阅存储管理说明文件。 访问物理磁盘时听 到的异常、持续的 刮擦声或摩擦声。 请参阅获得帮助。 设备运行状况 打开企业管理窗口 (EMW) 时,Dell EMC PowerVault Modular Disk Storage Manager (MD Storage Manager) 会与每个托管存储阵列建 立通信并确定当前存储阵列状态。托管存储阵列旁的图标代表当前状态。 EMW 树视图中显示的状态图标代表每个存储
表.
表.
收集物理磁盘数据 可使用收集物理磁盘数据选项从存储阵列上的所有物理磁盘收集日志感测数据。日志感测数据包含存储阵列中每个虚拟磁盘所维护 的统计信息。技术支持代表可使用此信息分析物理磁盘的性能和解决可能存在的问题。 注: 仅在技术支持代表的指导下使用该选项。 要收集物理磁盘数据,请执行以下操作: 1. 在 AMW 中,执行以下操作之一: • • 要从存储阵列中的所有虚拟磁盘收集数据,请选择监测 > 运行状况 > 收集物理磁盘数据 > 所有物理磁盘。 要从 Hardware(硬件)选项卡中所选的单个物理磁盘收集数据,请选择 Monitor(监测) > Health(运行状况) > Collect Physical Disk Data(收集物理磁盘数据) > Selected Physical Disks(所选的物理磁盘)。 此时将显示收集物理磁盘数据窗口。 2. 在指定文件名中为物理磁盘数据文件名输入名称,或者单击浏览导航至以前保存的文件以覆盖现有文件。 如果未指定文件名的后缀,系统会自动为该文件名添加后缀 *.bin。 3. 单击 Start(开始)。 物理磁盘数据收集已完成并保存在输入的位置。 4.
2. 在存储阵列表中,选择一个或多个存储阵列。 3. 单击移除。 4. 查看信息,然后单击是。 此时将显示计划支持数据收集对话框。 5.
存储阵列配置文件 存储阵列配置文件提供了对存储阵列中所有组件和属性的说明。它还提供了用于将存储阵列配置文件信息保存至文本文件的选项。 可能需要使用存储阵列配置文件作为恢复期间的辅助工具或对存储阵列当前配置的概述。如果配置发生更改,请创建一份新的存储 阵列配置文件。 1. 要打开存储阵列配置文件,请在 AMW 中执行以下操作之一: • • 选择监测 > 报告 > 存储阵列配置文件。 选择摘要选项卡,然后单击监测区域中的查看存储阵列配置文件。 此时将显示存储阵列配置文件对话框。存储阵列配置文件对话框包含若干选项卡,每个选项卡的标题与所包含信息的主题相对 应。 2. 在存储阵列配置文件对话框中,执行以下操作之一: • 查看详细信息 - 请转至步骤 3。 • 搜索存储阵列配置文件 - 请转到步骤 4。 • 保存存储阵列配置文件 - 请转到步骤 5。 • 关闭存储阵列配置文件 - 请转到步骤 6。 3. 选择其中某个选项卡,并使用水平滚动条和垂直滚动条查看存储阵列配置文件信息。 注: 可以使用此过程中的其他步骤搜索存储阵列配置文件、保存存储阵列配置文件或关闭存储阵列配置文件。 4.
从无响应存储阵列状态中恢复 存储阵列具有无响应状态的原因有几种。使用本主题中的过程确定可能的原因和解决方案。MD Storage Manager 最多需要五分钟即 可检测出存储阵列已无响应或再次响应。完成此过程之前,请务必等待一段时间,然后再确定存储阵列是否仍然无响应。 要从无响应的存储阵列中恢复,请执行以下操作: 1. 2. 3. 4. 5. 检查 EMW 中的树形视图以查看是否所有的存储阵列都无响应。 如果所有存储阵列都无响应,则检查存储管理站网络连接以确保其可以连接到网络。 请确保已安装 RAID 控制器模块且存储阵列电源供给正常。 如果存储阵列有问题,则需要进行纠正。 根据存储阵列的托管方式执行以下操作之一: • 带外托管存储阵列 - 转至步骤 6。 • 带内托管存储阵列 - 转至步骤 12。 6. 对于带外托管存储阵列,使用 ping 命令确保可到达 RAID 控制器模块,从而确保可通过网络访问 RAID 控制器模块。键入以下命 令之一,然后按 。 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
2. 选择要定位的物理磁盘。 3. 选择硬件 > 闪烁 > 物理磁盘。 所选物理磁盘上的 LED 将闪烁。 4. 定位到物理磁盘后,单击确定。 LED 将停止闪烁。如果当前正在从另一个存储管理站调用其他闪烁操作(闪烁磁盘组、闪烁存储阵列、闪烁物理磁盘端口或闪烁 扩展机柜),这些 LED 也会停止闪烁。 5. 在极少数情况下,物理磁盘上的 LED 无法停止闪烁,此时可以在 AMW 中选择硬件 > 闪烁 > 停止所有指示。 如果 LED 成功停止闪烁,将显示确认消息。 6. 单击确定。 找到扩展机柜 可以使用闪烁选项物理定位并识别存储阵列中的扩展机柜。 LED 激活会根据使用的扩展机柜类型而有所不同。 • • 如果扩展机柜使用白色 LED,则“闪烁扩展机柜”操作会点亮扩展机柜上的白色 LED。该 LED 不会闪烁。 如果拥有任何其他类型的扩展机柜,该操作会导致扩展机柜中的所有物理磁盘上的相应 LED 闪烁。 要定位扩展机柜,请执行以下操作: 1. 选择 Hardware(硬件)选项卡。 2. 选择要定位的扩展机柜中的物理磁盘。 3.
在运行 Windows 的主机上的命令提示窗口中,导航至 C:\Program Files\Dell\MD Storage Manager\util 并运行以下命 令: SMrepassist -f 其中,-f 用于刷新 所标明的文件系统的所有内存驻留数据,并且 用于在以下语法中指 定唯一的文件系统:drive-letter: 文件系统标识符可能仅包含一个物理磁盘盘符,如下例所示: SMrepassist -f E: 注: 在 Windows 中,装载点路径是一个物理磁盘盘符。 当公用程序不能区分以下各项时,命令行中将显示错误消息: • • 源虚拟磁盘和快照虚拟磁盘(例如,快照虚拟磁盘已被移除)。 标准虚拟磁盘和虚拟磁盘复制(例如,虚拟磁盘复制已被移除)。 未识别的设备 如果 MD Storage Manager 无法访问新存储阵列,则表明存在未识别的节点或设备。导致此错误的原因包括网络连接问题、存储阵列 已关闭或不存在该存储阵
5. 确保控制器固件与管理站上的 MD Storage Manager 兼容。如果控制器固件已升级,MD Storage Manager 可能无法访问存储阵 列。可能需要新版本的 MD Storage Manager 来管理具有新版本控制器固件的存储阵列。 如果此问题仍然存在,请参阅获取帮助。 6. 查看是否存在到一个或多个控制器的过多网络流量。此问题将自行纠正,因为 MD Storage Manager 会尝试定期与存储阵列中的 控制器重新建立通信。如果存储阵列无响应,而连接存储阵列的后续尝试成功,则存储阵列将会有响应。 7. 对于带外存储阵列,查看其他存储管理站是否正在对存储阵列进行管理操作。执行的管理操作的类型和进行的管理会话的数量共 同确定了与控制器建立的 TCP/IP 连接的数量。当建立的 TCP/IP 连接的数量达到最大值时,控制器将停止响应。此问题将自行 纠正,因为在某些 TCP/IP 连接终止后,控制器会响应其他连接尝试。 8.
19 获取帮助 主题: • 联系 Dell EMC 联系 Dell EMC 注: 如果没有活动的 Internet 连接,您可以在购货发票、装箱单、帐单或 Dell 产品目录上查找联系信息。 Dell 提供了若干联机及电话支持和服务选项。服务会因所在国家和地区以及产品的不同而有所差异,您所在的地区可能不提供某些服 务。如要联系 Dell 解决有关销售、技术支持或客户服务问题: 1. 2. 3. 4. 请转至 Dell.