Support Matrix

Default IPv4 settings for management ports
on Dell EMC PowerVault MD series storage
arrays
NOTE: No default gateway is set.
By default, the management ports on the storage array are set to DHCP. If DHCP fails, the following IPv4 settings are used:
Table 5. Default IPv4 Management Port Addresses
Controller IPv4 address Subnet mask
Controller 0 192.168.128.101 255.255.255.0
Controller 1 192.168.128.102 255.255.255.0
Topics:
• Default IPv4 settings for iSCSI ports on Dell EMC PowerVault MD36x0i array
• Default IPv4 settings for iSCSI ports on Dell EMC PowerVault MD32x0i storage array
Default IPv4 settings for iSCSI ports on Dell EMC
PowerVault MD36x0i array
NOTE: No default gateway is set.
By default, the iSCSI ports on the storage array are set to the static IPv4 settings listed in Table 6.
Table 6. Default iSCSI Port IPv4 Addresses on MD36x0i Storage Arrays
Controller/port IPv4 address Subnet mask Port #
Controller 0, Port 0 192.168.130.101 255.255.255.0 3260
Controller 0, Port 1 192.168.131.101 255.255.255.0 3260
Controller 1, Port 0 192.168.130.102 255.255.255.0 3260
Controller 1, Port 1 192.168.131.102 255.255.255.0 3260
Default IPv4 settings for iSCSI ports on Dell EMC
PowerVault MD32x0i storage array
Table 7. Default iSCSI Port IPv4 Addresses on Dell EMC PowerVault MD32x0i Storage Arrays
Controller/Port IPv4 address Subnet mask Port #
Controller 0, Port 0 192.168.130.101 255.255.255.0 3260
Controller 0, Port 1 192.168.131.101 255.255.255.0 3260
Controller 0, Port 2 192.168.132.101 255.255.255.0 3260
4
Default IPv4 settings for management ports on Dell EMC PowerVault MD series storage arrays 11