Owners Manual
Table Of Contents
- Dell PowerVault MD3260/3260i/3660i/3660f/3060e Storage Arrays Owner's Manual
- About Your System
- Controller Modules
- RAID Controller Modules
- MD3260 SAS RAID Controller Module Features And Indicators
- MD3260i iSCSI RAID Controller Module Features And Indicators
- MD3660i iSCSI RAID Controller Module Features And Indicators
- MD3660f Fibre Channel RAID Controller Module Features And Indicators
- Expansion Controller Modules
- Controller Module—Additional Features
- Storage Array Thermal Shutdown
- System Password Reset
- Installing System Components
- Troubleshooting Your System
- Safety First—For You And Your System
- Troubleshooting Storage Array Startup Failure
- Troubleshooting Loss Of Communication
- Troubleshooting An SFP Transceiver
- Troubleshooting External Connections
- Troubleshooting Power Supply Modules
- Troubleshooting Array Cooling Problems
- Troubleshooting Expansion Enclosure Management Modules
- Troubleshooting RAID Controller Modules
- Troubleshooting Physical Disks
- Troubleshooting Array And Expansion Enclosure Connections
- Troubleshooting A Wet Storage Array
- Troubleshooting A Damaged Array
- Controller Failure Conditions
- Technical Specifications
- Getting Help
Cooling Fan Module LED Indicator Codes
Figure 5. Cooling Fan Module Indicators
Item Indicator Icon Description
1 Power indicator The power indicator lights green when power to the
cooling fan module is available.
2 Service action required
indicator
The service action required indicator lights amber when
there is a fault in the cooling fan module.
3 Service action allowed
indicator
CAUTION: Remove the cooling fan module from the
system only if the service action allowed indicator
lights blue. Removing the cooling fan module from the
system when the service action allowed indicator is
off may damage the system.
Blue Indicates that you can safely
remove the cooling fan module
from the system.
Off Indicates that you cannot
remove the cooling fan module
from the system.
Power Supply Module Features And Indicators
NOTE: Your storage array is shipped with two IEC C19 to C20 jumper cords. Connect the C19 plug to the array's
power supplies and the C20 plug to the power distribution unit (PDU) in the rack cabinet.
12