Matrices de almacenamiento Dell PowerVault MD3400/3420/3800i/3820i/3800f/3820f Guía de introducción Modelo reglamentario: E03J and E04J Series Tipo reglamentario: E03J001 and E04J001 January 2014 Rev.
Notas, precauciones y advertencias NOTA: Una NOTA indica información importante que le ayuda a hacer un mejor uso de su producto. PRECAUCIÓN: Una PRECAUCIÓN indica la posibilidad de daños en el hardware o la pérdida de datos, y le explica cómo evitar el problema. AVISO: Un mensaje de AVISO indica el riesgo de daños materiales, lesiones corporales o incluso la muerte. Copyright © 2014 Dell Inc. Todos los derechos reservados.
1 Instalación y configuración NOTA: Antes de realizar el procedimiento siguiente, revise las instrucciones de seguridad incluidas con el sistema.
Conexión de los cables de alimentación Ilustración 2. Conexión de los cables de alimentación Conecte los cables de alimentación del sistema al sistema. Fijación de los cables de alimentación Ilustración 3. Fijación de los cables de alimentación Abra el soporte de rentención del cable tirando de las pestañas en los lados, introduzca el cable y asegure el cable de alimentación del sistema, como se muestra en la ilustración.
Cómo encender el sistema Ilustración 4. Cómo encender el sistema Gire el conmutador de alimentación hacia la parte posterior del sistema en la posición de encendido. Se debe encender el LED de alimentación. Instalación del bisel Ilustración 5. Instalación del bisel Instale el bisel tal como se muestra en la ilustración. Acuerdo de licencia de Dell Software Antes de utilizar el sistema, lea el Acuerdo de licencia de Dell Software que se incluye.
• • • • • En la Guía del administrador, se proporciona información sobre las funciones del software Administrador de almacenamiento en disco modular y describe cómo configurar y administrar su sistema de disco modular. Este documento está disponible en línea en dell.com/support/manuals. En la Guía de implementación, se proporciona información sobre el cableado del sistema y sobre la instalación y configuración inicial del software Administrador de almacenamiento en disco modular.
Alimentación NOTA: Este sistema ha sido diseñado también para que se conecte a sistemas de alimentación de TI con un voltaje entre fases no superior a 230 V.
Entorno En funcionamiento Un impulso de descarga en el sentido positivo del eje z (un impulso en cada lado del sistema) de 31 G durante 2,6 m en la orientación de funcionamiento. Almacenamiento Seis impulsos de descarga ejecutados consecutivamente en los ejes x, y y z positivos y negativos (un impulso en cada lado del sistema) de 71 G durante un máximo de 2 m. Altitud En funcionamiento De –30,5 m a 30482000 m (de –50 pies a 10 0006560 pies). NOTA: Para altitudes superiores a 2.