Dell PowerVault MD Series VMware Storage Replication Adapter (SRA) Installations- und Konfigurationshandbuch (Web Client)
Anmerkungen, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG liefert wichtige Informationen, mit denen Sie den Computer besser einsetzen können. VORSICHT: Ein VORSICHTSHINWEIS macht darauf aufmerksam, dass bei Nichtbefolgung von Anweisungen eine Beschädigung der Hardware oder ein Verlust von Daten droht, und zeigt auf, wie derartige Probleme vermieden werden können.
Inhaltsverzeichnis 1 Übersicht über den VMware Site Recovery Manager....................................................... 4 2 Neue Funktionen und Änderungen.................................................................................. 6 3 Systemanforderungen..................................................................................................... 7 4 Empfehlungen zur Speicherung.......................................................................................8 NVSRAM-Einstellungen.....
1 Übersicht über den VMware Site Recovery Manager VMware vCenter Site Recovery Manager (SRM) interagiert mit den Speicher-Arrays unter Verwendung der Storage Replicator Adapter (SRA) für die Ermittlung und Replizierung von Speicher-LUNs (Logical Unit Numbers) oder virtuellen Festplatten zwischen Disaster Recovery (DR) Sites. SRA interagiert außerdem mit den Speicher-Arrays, um Failover- und Test-Failover-Fähigkeiten für den SRM bereitzustellen, was automatische Failover zwischen DR-Standorten ermöglicht.
Replikationstypen verwendet, sollten Sie alle Aufgaben in Betracht ziehen, aber wenn dies nicht der Fall ist, müssen Sie eventuell nur eine Teilmenge der insgesamt möglichen Reihe von Tasks abschließen. Der Satz von Aufgaben lautet wie folgt: 1. Erwerben Sie die neueste SRM-Software und die erforderlichen Patches. 2. Konfigurieren Sie die SRM-Datenbanken an jedem Standort. 3. Installieren Sie SRM am geschützten Standort. 4. Installieren Sie SRM am Wiederherstellungsstandort. 5.
2 Neue Funktionen und Änderungen Die Dell Modular Disk (MD) SRA wurde aktualisiert, um gemeinsam mit VMware vCenter Site Recovery Manager (SRM) 6.0 zu funktionieren. Die neuen Funktionen der Firmware 08.20 ermöglichen, dass diese Version von SRA mit vCenter Server 5.1, 5.5 und 6.0 und mit VMware SRM 5.1, 5.5, 5.8 und 6.0 funktioniert. Diese SRA funktioniert nicht mit früheren Versionen von vCenter Server oder SRM. Zudem funktioniert diese Version der Dell SRA nur mit den MD-Speicher-Arrays. Unter dell.
3 Systemanforderungen Der Prozess der Implementierung von Dell MD SRA wird in den folgenden Abschnitten beschrieben. Weitere Informationen zu den Server-Betriebssystemen (BSs), MD Speicher-Arrays und mit der Dell MD SRA unterstützten SRMVersionen finden Sie in der neuesten Support-Matrix unter Dell.com/support.
4 Empfehlungen zur Speicherung Informationen zu empfohlenen Speicher-Array-Konfigurationen und benutzerdefinierten Einstellungen finden Sie im Dell Modular Disk Storage Replication Adapter Best Practices-Handbuch (Web-Client).
5 Lizenzierungsanforderungen Die Dell MD SRA verwendet entweder eine Erweiterungsfunktions für synchrone Replikation oder für asynchrone Replikation oder beides, zusammen mit der Erweiterungsfunktion Snapshot zur Ermöglichung von Failover und Test-Failover. Basierend auf Ihrer Umgebung aktivieren Sie außerdem die Speicherpartitionierung, ausreichend für die Anzahl der Hosts, die mit dem Speicher-Array verbunden sind.
6 Konfigurationsverfahren Das einzige Konfigurationsverfahren, das nach der Erstinstallation erforderlich ist, dient zur Änderung der SraConfigurationData.xmlDatei, die sich im config-Unterverzeichnis der SRA-Installation befindet, wenn Ihre Umgebung Speicher-Array-Kennwörter verwendet. Falls die MD-Speicher-Arrays keine Kennwörter verwenden, sind Modifikationen nicht erforderlich. Um die Aufforderung zur Passworteingabe für MD-Speicher-Arrays zu aktivieren, bearbeiten Sie die SraConfigurationData.
7 Installationsverfahren Zum Installieren der Dell MD SRA laden Sie die neueste Version von der VMware Downloads-SRM herunter und überprüfen die md5sum des Installationspakets. Zur Installation der SRA führen Sie folgendes durch: 1. Stellen Sie sicher, dass der SRM-Server an beiden Standorten, die an DR teilnehmen, installiert wurde. 2. Führen Sie an jedem Standort auf dem SRM-Server das SRAInstaller-xx.xx.xxxx.xxxx.exe-Paket aus. 3.
Abbildung 3. SRM-Ressourcenzuordnungen 13. Wählen Sie Erweiterte Einstellungen, und wählen Sie dann Speicher-Provider. Klicken Sie auf Bearbeiten, und ändern Sie die folgenden Speicher-Provider-Einstellungen: • storageProvider.fixRecoveredDatastoreNames: aktiviert • storageProvider.hostRescanDelaySec: 30 • storageProvider.hostRescanRepeatCnt: 2 • storageProvider.hostRescanTimeoutSec: 900 Abbildung 4. Erweiterte SRM-Einstellungen 14.
Abbildung 5. Registerkarte „Zugehörige Objekte“ des Standorts 2. Klicken Sie auf das Symbol Array-Manager hinzufügen. 3. Klicken Sie im Assistenten Array-Manager hinzufügen (Abbildung 6) auf die Optionsschaltfläche Ein Paar von ArrayManagern hinzufügen (Standardeinstellung). 4. Überprüfen Sie die Standortinformationen, und klicken Sie dann auf Weiter. 5. Wählen Sie die Dell MD SRA aus und klicken Sie anschließend auf Weiter. 6.
9. Klicken Sie auf Weiter. 10. Stellen Sie sicher, dass der Array erfolgreich hinzugefügt wurde. 11. Klicken Sie auf Weiter. 12. Wiederholen Sie Schritt 7 für den Speicher-Array des Peer-Standorts. 13. Stellen Sie sicher, dass das Kontrollkästchen des Array-Paares markiert ist, und klicken Sie dann auf Weiter. 14. Überprüfen Sie die Zusammenfassungsinformationen und klicken Sie anschließend auf Fertig stellen. Nicht alle SRM-Einrichtungsvorgänge sind abgeschlossen, nur der SRA-Teil.
Abbildung 8. Schutzgruppenstatus 9. Stellen Sie sicher, dass der Schutzgruppenstatus korrekt ist oder beheben Sie alle Zuordnungsprobleme. Konfigurieren von Wiederherstellungsplänen 1. Wählen Sie aus der Liste der Standorte einen der Standortnamen aus, den Sie konfigurieren möchten. 2. Klicken Sie auf der Registerkarte Zugehörige Objekte auf Wiederherstellungspläne, und klicken Sie anschließend auf das Symbol Wiederherstellungsplan erstellen. 3.
Abbildung 9. Assistent „Wiederherstellungsplan erstellen“ 6. Wählen Sie das Netzwerk zur Verwendung für den Test-Failover-Workflow, und klicken Sie dann auf Weiter. 7. Geben Sie eine Beschreibung für den Wiederherstellungsplan ein, falls erforderlich, und klicken Sie dann auf Weiter. 8. Überprüfen Sie die Zusammenfassungsinformationen und klicken Sie anschließend auf Fertig stellen.
8 Upgrade-Vorgang Die Dell MD SRA Version 05.xx.xxxx.xxxx ist nicht kompatibel mit der früheren LSI SRA Version 01.01.xx.xx. Wenn Sie ein Upgrade einer SRM 4.1-Umgebung auf SRM 5.0, 5.1, 5.5 oder 5.8 vornehmen, deinstallieren Sie den LSI SRA-Adapter und installieren Sie die Dell MD SRA Version 05.60.3000.xxxx. SRM 5.8 und 6.0 verwenden VMware vSphere Web Client zur Verwaltung von SRM.
9 Informationen zur Fehlersuche Alle Protokollierung für die Dell MD SRA ist eine Ausgabe in die SRM-Protokolldateien auf C: \ProgramData\VMware\VMware vCenter Site Recovery Manager\Logs zusammen mit SRA-Protokollen unter C: \Program Files\VMware\VMware vCenter Site Recovery Manager\storage\sra\ Dell MD Storage Replication Adapter \logs. Alle aufgetretenen Fehler bei allen Verfahren werden in diesen Dateien protokolliert.
Abbildung 11. Export des Wiederherstellungsplanverlaufs Speicher-Array-Supportbündel von jedem Speicher-Array. Abbildung 12. Speicher-Array-Supportbündel (Optional) Ein Screenshot für ein zugewiesenes Volume, das die Pfadkonfiguration anzeigt.
Abbildung 13.
10 Ablaufdiagramm discoverArrays Abbildung 14. Funktion „Arrays ermitteln“ discoverLUNs Abbildung 15.
testFailover (Start) Abbildung 16. testFailover (Start)-Funktion testFailover (Stop) Abbildung 17.
SyncOnce Abbildung 18. SyncOnce-Funktion Failover Abbildung 19.
11 Wie Sie Hilfe bekommen Dokumentationsmatrix Die Dokumentationsmatrix enthält Informationen über Dokumente, in denen Sie Informationen zum Einrichten und Verwalten des Systems finden. Dell Dokumentation • • • • • • Rufen Sie für die Dokumentation von PowerEdge und PowerVault die Seite Dell.com/support auf und geben Sie die ServiceTag-Nummer ein, um Ihre Systemdokumentation zu erhalten. Die Dokumente zur Virtualisierung finden Sie unter Dell.com/virtualizationsolutions.
b. Klicken Sie auf Senden. Die Support-Seite enthält eine Liste, in der verschiedene Support-Kategorien angezeigt werden. 4. Für allgemeinen Support: a. Wählen Sie Ihre Produktkategorie aus. b. Wählen Sie Ihr Produktsegment aus. c. Wählen Sie Ihr Produkt aus. Die Support-Seite enthält eine Liste, in der verschiedene Support-Kategorien angezeigt werden. System-Servicekennung ausfindig machen Ihr System wird durch einen eindeutigen Express-Servicecode und eine eindeutige Service-Tag-Nummer identifiziert.