Reference Guide

Dell PowerVault ML6000 SMI-S Reference Guide 87
Table 128 Required Instances for ElementCapabilities
Table 129 Lun Mapping Instances of SCSIProtocolController
When LUN mapping is enabled, there is a an instance for each host-blade-port combination. A single host
has a single StorageHardwareID, which is then associated through AuthorizedSubject to multiple
AuthorizedPrivileges, one for each blade that the host is attached to (or has ever been), and that, in turn, is
associated through AuthorizedTarget to two SCSIProtocolControllers (one for each port on the blade).
Table 130 LUN Mapping Instances of ProtocolControllerForUnit
Property Instance (one for each computer system)
Capabilities CIM_ProtocolControllerMaskingCapabilities
ManagedElement CIM_ComputerSystem
Property Instances (one for each host-blade-port combination)
SystemCreationClassName[key] CIM_ComputerSystem
SystemName <Vid> <Pid> <Serial>
CreationClassName[key] CIM_SCSIProtocolController
DeviceID “B”:<bladeIP>:.<port>:<blade host ID>:WWPN_HI:WWPNLO
OtherIdentifyingInfo {WWPN, hostname, blade serial}
Caption “B”:<bladeIP>:.<port>:<blade host ID>:WWPN_HI:WWPNLO
Description “FC Blade <IP>, port <port>, host: <hostname> (<WWPN>)”
ElementName CIM_SCSIProtocolController
IdentifyingInfoDescriptions {“Host WWPN”, “Host name”, “Serial Number”}
Property
Changer Instances (one for
each time that a partition is
exposed)
Drive Instances (one for each
time that a drive is exposed)
Antecedent CIM_SCSIProtocolController. CIM_SCSIProtocolController
Dependent CIM_ChangerDevice CIM_TapeDrive
DeviceAccess 2 (Read/Write) 2 (Read/Write)
DeviceNumber Host LUN Host LUN
AccessState 2 (online) if host is Online in GUI, 3 (offline) if host is offline in GUI