Users Guide

22 Setting Up Your Cluster

Figure 2-6. New Server Cluster Wizard

NOTE: The cautions in the Creating the Cluster window in Figure 2-6 are

reported as a result of the firewall being enabled. This does not impact

successful cluster creation. For more information about firewall port

exceptions, see "Firewall Port Exceptions" on page 9.

The cluster creation process is complete. If any errors have occurred during the

cluster creation, the color of the progress bar appears red. Click

The

Completing the New Server Cluster Wizard

screen appears.

Click

Finish

NOTE: This wizard gives you an option to add additional nodes to the cluster.

The PowerVault NX1950 cluster solution supports only two nodes with the

PowerVault MD3000 storage array (Integrated Solution) and up to eight nodes

with the Dell|EMC storage arrays (Gateway Solution).

After the node(s) are added, complete the on-screen instructions.

Click

Create or Join Cluster

in the

PowerVault NX1950 Initial

Configuration Tasks

wizard. In the remaining cluster nodes, start the

PowerVault NX1950 Initial Configuration Tasks

wizard, and click

Create

or Join Cluster