Owner`s manual
Table Of Contents
- About Your System
- Accessing System Features During Startup
- Front-Panel Features and Indicators
- LCD Panel Features (Optional)
- Home Screen
- Setup Menu
- View Menu
- Hard Drive Status Indicators
- Back-Panel Features and Indicators
- Guidelines for Connecting Optional External Devices
- NIC Indicator Codes
- Power Indicator Codes
- Diagnostic Lights (Optional)
- LCD Status Messages (Optional)
- Solving Problems Described by LCD Status Messages (Optional)
- Removing LCD Status Messages (Optional)
- System Messages
- Warning Messages
- Diagnostics Messages
- Alert Messages
- Other Information You May Need
- Using the System Setup Program and UEFI Boot Manager
- Choosing the System Boot Mode
- Entering the System Setup Program
- Responding to Error Messages
- Using the System Setup Program Navigation Keys
- System Setup Options
- Main Screen
- Memory Settings Screen
- Processor Settings Screen
- SATA Settings Screen
- Boot Settings Screen
- Integrated Devices Screen
- PCI IRQ Assignments Screen
- Serial Communication Screen
- Embedded Server Management Screen (Optional)
- Power Management Screen
- System Security Screen
- Exit Screen
- Entering the UEFI Boot Manager
- Using the UEFI Boot Manager Navigation Keys
- UEFI Boot Manager Screen
- UEFI Boot Settings Screen
- System Utilities Screen
- System and Setup Password Features
- Using the System Password
- Using the Setup Password
- Embedded System Management
- Baseboard Management Controller Configuration
- Entering the BMC Setup Module
- iDRAC Configuration Utility
- Entering the iDRAC Configuration Utility
- Installing System Components
- Recommended Tools
- Inside the System
- Removing and Replacing the Optional Front Bezel
- Opening and Closing the System
- Opening the System
- Closing the System
- Hard Drives
- Removing a Drive Blank
- Installing a Drive Blank
- Removing a Hot-Swap Hard Drive
- Installing a Hot-Swap Hard Drive
- Removing a Hard Drive From a Hard-Drive Carrier
- Installing a Hard Drive Into a Hard-Drive Carrier
- Power Supplies
- Removing a Redundant Power Supply
- Installing a Redundant Power Supply
- Removing the Power Supply Blank
- Installing the Power Supply Blank
- Removing a Non-Redundant Power Supply
- Installing a Non-Redundant Power Supply
- Expansion Cards
- Expansion Card Installation Guidelines
- Installing an Expansion Card
- Removing an Expansion Card
- Integrated Storage Controller Card
- Removing the Integrated Storage Controller Card
- Installing the Integrated Storage Controller Card
- Expansion-Card Riser
- Removing an Expansion-Card Riser
- Replacing an Expansion-Card Riser
- Internal USB Memory Key
- System Board Shroud
- Removing the System Board Shroud
- Installing the System Board Shroud
- iDRAC6 Express Card (Optional)
- Installing an iDRAC6 Express Card
- Removing an iDRAC6 Express Card (Optional)
- iDRAC6 Enterprise Card (Optional)
- Installing an iDRAC6 Enterprise Card
- Removing an iDRAC6 Enterprise Card
- VFlash Media (Optional)
- Installing a VFlash Media Card
- Removing a VFlash Media Card
- Cooling Fans
- Removing a Cooling Fan
- Replacing a Cooling Fan
- Optical Drive
- Removing an Optical Drive
- Installing an Optical Drive
- RAID Battery (Optional)
- Removing the RAID Battery
- Installing the RAID Battery
- System Memory
- General Memory Module Installation Guidelines
- Mode-Specific Guidelines
- Installing Memory Modules
- Removing Memory Modules
- Processors
- Removing a Processor
- Installing a Processor
- System Battery
- Replacing the System Battery
- Control Panel Assembly-LED/LCD (Optional)
- Removing the Control Panel Assembly
- Installing the Control Panel Assembly
- SAS Backplane
- Removing the SAS Backplane
- Installing the SAS Backplane
- Power Distribution Board
- Removing the Power Distribution Board
- Replacing the Power Distribution Board
- System Board
- Removing the System Board
- Installing the System Board
- Troubleshooting Your System
- Safety First-For You and Your System
- Troubleshooting System Startup Failure
- Troubleshooting External Connections
- Troubleshooting the Video Subsystem
- Troubleshooting a USB Device
- Troubleshooting a Serial I/O Device
- Troubleshooting a NIC
- Troubleshooting a Wet System
- Troubleshooting a Damaged System
- Troubleshooting the System Battery
- Troubleshooting Power Supplies
- Troubleshooting System Cooling Problems
- Troubleshooting a Fan
- Troubleshooting System Memory
- Troubleshooting an Internal USB Key
- Troubleshooting an Optical Drive
- Troubleshooting an External Tape Drive
- Troubleshooting a Hard Drive
- Troubleshooting a SAS or SAS RAID Controller
- Troubleshooting Expansion Cards
- Troubleshooting the Microprocessors
- Running the System Diagnostics
- Using Online Diagnostics
- Embedded System Diagnostics Features
- When to Use the Embedded System Diagnostics
- Running the Embedded System Diagnostics
- Embedded System Diagnostics Testing Options
- Using the Custom Test Options
- Selecting Devices for Testing
- Selecting Diagnostics Options
- Viewing Information and Results
- Jumpers and Connectors
- Getting Help
- Glossary
- Index
108 Installing System Components
VFlash Media (Optional)
The VFlash media card is a Secure Digital (SD) card that plugs into the
optional iDRAC6 Enterprise card at the back corner of the system.
Installing a VFlash Media Card
1
Locate the VFlash media slot at the back corner of the system.
2
With the label side facing up, insert the contact-pin end of the SD card
into the card slot on the module.
NOTE: The slot is keyed to ensure correct insertion of the card.
3
Press inward on the card to lock it into the slot.
Removing a VFlash Media Card
To remove the VFlash media, push inward on the card to release it, and pull
the card from the card slot.
Cooling Fans
Your system contains four dual-motor fans and provides cooling for the
processor and memory modules and two dual-motor fans for the redundant
power supplies.
NOTE: Hot-swap removal or installation of the fans is not supported.
NOTE: In the event of a problem with a particular fan, the fan number is referenced
by the system’s management software, allowing you to easily identify and replace
the proper fan by noting the fan numbers on the fan assembly.
Removing a Cooling Fan
WARNING: The cooling fan can continue to spin for some time after the system
has been powered down. Allow time for the fan to stop spinning before removing it
from the system.
WARNING: Do not attempt to operate the system without the cooling fan.
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
book.book Page 108 Thursday, August 13, 2009 7:27 AM