Owner`s manual
Table Of Contents
- About Your System
- Accessing System Features During Startup
- Front-Panel Features and Indicators
- LCD Panel Features (Optional)
- Home Screen
- Setup Menu
- View Menu
- Hard Drive Status Indicators
- Back-Panel Features and Indicators
- Guidelines for Connecting Optional External Devices
- NIC Indicator Codes
- Power Indicator Codes
- Diagnostic Lights (Optional)
- LCD Status Messages (Optional)
- Solving Problems Described by LCD Status Messages (Optional)
- Removing LCD Status Messages (Optional)
- System Messages
- Warning Messages
- Diagnostics Messages
- Alert Messages
- Other Information You May Need
- Using the System Setup Program and UEFI Boot Manager
- Choosing the System Boot Mode
- Entering the System Setup Program
- Responding to Error Messages
- Using the System Setup Program Navigation Keys
- System Setup Options
- Main Screen
- Memory Settings Screen
- Processor Settings Screen
- SATA Settings Screen
- Boot Settings Screen
- Integrated Devices Screen
- PCI IRQ Assignments Screen
- Serial Communication Screen
- Embedded Server Management Screen (Optional)
- Power Management Screen
- System Security Screen
- Exit Screen
- Entering the UEFI Boot Manager
- Using the UEFI Boot Manager Navigation Keys
- UEFI Boot Manager Screen
- UEFI Boot Settings Screen
- System Utilities Screen
- System and Setup Password Features
- Using the System Password
- Using the Setup Password
- Embedded System Management
- Baseboard Management Controller Configuration
- Entering the BMC Setup Module
- iDRAC Configuration Utility
- Entering the iDRAC Configuration Utility
- Installing System Components
- Recommended Tools
- Inside the System
- Removing and Replacing the Optional Front Bezel
- Opening and Closing the System
- Opening the System
- Closing the System
- Hard Drives
- Removing a Drive Blank
- Installing a Drive Blank
- Removing a Hot-Swap Hard Drive
- Installing a Hot-Swap Hard Drive
- Removing a Hard Drive From a Hard-Drive Carrier
- Installing a Hard Drive Into a Hard-Drive Carrier
- Power Supplies
- Removing a Redundant Power Supply
- Installing a Redundant Power Supply
- Removing the Power Supply Blank
- Installing the Power Supply Blank
- Removing a Non-Redundant Power Supply
- Installing a Non-Redundant Power Supply
- Expansion Cards
- Expansion Card Installation Guidelines
- Installing an Expansion Card
- Removing an Expansion Card
- Integrated Storage Controller Card
- Removing the Integrated Storage Controller Card
- Installing the Integrated Storage Controller Card
- Expansion-Card Riser
- Removing an Expansion-Card Riser
- Replacing an Expansion-Card Riser
- Internal USB Memory Key
- System Board Shroud
- Removing the System Board Shroud
- Installing the System Board Shroud
- iDRAC6 Express Card (Optional)
- Installing an iDRAC6 Express Card
- Removing an iDRAC6 Express Card (Optional)
- iDRAC6 Enterprise Card (Optional)
- Installing an iDRAC6 Enterprise Card
- Removing an iDRAC6 Enterprise Card
- VFlash Media (Optional)
- Installing a VFlash Media Card
- Removing a VFlash Media Card
- Cooling Fans
- Removing a Cooling Fan
- Replacing a Cooling Fan
- Optical Drive
- Removing an Optical Drive
- Installing an Optical Drive
- RAID Battery (Optional)
- Removing the RAID Battery
- Installing the RAID Battery
- System Memory
- General Memory Module Installation Guidelines
- Mode-Specific Guidelines
- Installing Memory Modules
- Removing Memory Modules
- Processors
- Removing a Processor
- Installing a Processor
- System Battery
- Replacing the System Battery
- Control Panel Assembly-LED/LCD (Optional)
- Removing the Control Panel Assembly
- Installing the Control Panel Assembly
- SAS Backplane
- Removing the SAS Backplane
- Installing the SAS Backplane
- Power Distribution Board
- Removing the Power Distribution Board
- Replacing the Power Distribution Board
- System Board
- Removing the System Board
- Installing the System Board
- Troubleshooting Your System
- Safety First-For You and Your System
- Troubleshooting System Startup Failure
- Troubleshooting External Connections
- Troubleshooting the Video Subsystem
- Troubleshooting a USB Device
- Troubleshooting a Serial I/O Device
- Troubleshooting a NIC
- Troubleshooting a Wet System
- Troubleshooting a Damaged System
- Troubleshooting the System Battery
- Troubleshooting Power Supplies
- Troubleshooting System Cooling Problems
- Troubleshooting a Fan
- Troubleshooting System Memory
- Troubleshooting an Internal USB Key
- Troubleshooting an Optical Drive
- Troubleshooting an External Tape Drive
- Troubleshooting a Hard Drive
- Troubleshooting a SAS or SAS RAID Controller
- Troubleshooting Expansion Cards
- Troubleshooting the Microprocessors
- Running the System Diagnostics
- Using Online Diagnostics
- Embedded System Diagnostics Features
- When to Use the Embedded System Diagnostics
- Running the Embedded System Diagnostics
- Embedded System Diagnostics Testing Options
- Using the Custom Test Options
- Selecting Devices for Testing
- Selecting Diagnostics Options
- Viewing Information and Results
- Jumpers and Connectors
- Getting Help
- Glossary
- Index
Installing System Components 113
Installing an Optical Drive
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1
If installed, remove the optional front bezel. See "Removing and Replacing
the Optional Front Bezel" on page 81.
2
Turn off the system, including any attached peripherals, and disconnect
the system from its electrical outlet.
3
Open the system. See "Opening the System" on page 82.
4
Align the two notches of the metal standoffs on the chassis with the holes
in the drive. See Figure 3-17.
5
Pull the release latch, place the optical drive in position, and release the
release latch.
6
Connect the power and data cables to the back of the drive.
You must route these cables properly underneath the tabs on the system
chassis to prevent them from being pinched or crimped. See Figure 3-1.
7
If not already done, connect the power cable to DVD_PWR and the
interface cable to SATA_E on the system board. See Figure 6-1.
8
If applicable, replace the optional front bezel. See "Removing and
Replacing the Optional Front Bezel" on page 81.
9
Reconnect the system and peripherals to their electrical outlets.
RAID Battery (Optional)
Removing the RAID Battery
The information in this section applies only to systems with the optional
PERC controller card.
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
Open the system. See "Opening the System" on page 82.
book.book Page 113 Thursday, August 13, 2009 7:27 AM